Tangit Glue 500 ML
Description:
Tangit Glue 500 ML

Tangit Glue 500 ML

The Paints Hub

Tangit Glue 50 ML
Description;
Tangit Glue 50 ML

Tangit Glue 50 ML

Tangit Glue 250 ML
Description;
Tangit Glue 250 ML

Tangit Glue 250 ML

Tangit Glue 100 ML
Description;
Tangit Glue 100 ML

Tangit Glue 100 ML

Tangit Glue 1 Litre
Description;
Tangit Glue 1 Litre

Tangit Glue 1 Litre

<header id="page_h">
<div class="r1">
<div class="container-fluid">
<div class="tr-section clearfix">
<nav id="mm_block" class="main_menu">&nbsp;
</nav>
</div>
</div>
</div>
</header>
<div class="main-section">
<section class="mod-prddet in-page">
<div class="pheader">
<div class="container">
<h1 class="ptitle">Cementitious</h1>
</div>
</div>
<div class="container">
<div class="content-page">
<div class="row">
<div class="col-sm-8 col-lg-9">
<div class="row">
<div class="xxs-full col-xs-8 col-md-8 col-lg-9 xs_mar_top_c">
<h2 class="prd-title fs_xl">Sika Seal 105 H</h2>
<div class="mar-top-c">Description
<div class="ed_body descr all_inherit">
Multi-purpose two component polymer modified, pore-blocking cementitious mortar for internal or external waterproofing applications.
ADVANTAGES
<ul>
<li>Efficient, multi-purpose waterproofing</li>
<li>Ready to use mortar: A+B components without water addition</li>
<li>Can be applied by trowel or brush (depending on the mixing ratio A:B)</li>
<li>Good adhesion to various substrates</li>
</ul>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</section>
</div>

Sika Top Seal 105(powder+liquid)

ORIGINAL INSUTECH INSUCOAT WATER BASED BITUMEN EMULSION PRIMER 20 LITRES IN NAIROBI, KENYA
Insucoat is a high grade of water based bitumen liquid emulsion, which serves as first layer of an insulation system , the coating dries to form a black flexible protective film. Dries to form a tough barrier to water vapor transmisison. Shop high quality waterproofing materials at Ali Glaziers Ltd which complies to international standards!
KEY FEATURES:
<ul>
<li>Versatile with several benefits</li>
<li>Environmentally friendly</li>
<li>Non-flamable</li>
</ul>
DILUTION:
<ul>
<li>Waterproofing &amp; protective coating: Add 5-10% of clean water</li>
<li>Primer coating: Dilute the same bitumenemulsion with 10-20% water</li>
</ul>
TECHNICAL SPECIFICATIONS:
<ul>
<li>Drying times: 1-2 Hours @ 25 degrees</li>
<li>Time between coats: 3-4 Hours</li>
</ul>
Shop genuine INSUTECH products in Nairobi, Kenya only from Ali Glaziers Ltd in Kenya! We are authorized distributors with ready stock for both wholesale &amp; bulk wholesale orders. We are leading suppliers of waterproofing products and equipment in Nairobi, Kenya with daily countrywide delivery arrangements straight to site! Get in touch with Ali Glaziers Ltd today to explore the widest range of premium waterproofing solutions:

Premier Bitumen

Yupin Wall Master Powder 40KGS With Color
Description;
Yupin Wall Master Powder 40KGS With Color

Yupin Wall Master Powder 40KGS With Color

Yupin Wall Master Powder 40KGS Plain
Description;
Yupin Wall Master Powder 40KGS Plain

Yupin Wall Master Powder 40KGS Plain

Yupin Wall Master Paste 30 kgs
Description;
Yupin Wall Master Paste 30 kgs

Yupin Wall Master Paste 30 kgs

Yupin Silicone Exterior Paint 1 ltrs

Yupin Silicone Exterior Paint 1 ltrs

Yupin Ultra Smooth Vinyl Matt Emulsion 4 lts
Description
Yupin Ultra Smooth Vinyl Matt Emulsion 4 lts

Yupin Ultra Smooth Vinyl Matt Emulsion 4 lts

Yupin Ultra Smooth Vinyl Matt Emulsion 20 lts
Description;
Yupin Ultra Smooth Vinyl Matt Emulsion 20 lts

Yupin Ultra Smooth Vinyl Matt Emulsion 20 lts

Yupin Ultra Smooth Vinyl Matt Emulsion 1 lts
Description;
Yupin Ultra Smooth Vinyl Matt Emulsion 1 lts

Yupin Ultra Smooth Vinyl Matt Emulsion 1 lts

Yupin Superior weather Cover Paint 4 ltrs
Description;
Yupin Superior weather Cover Paint 4 ltrs

Yupin Superior weather Cover Paint 4 ltrs

Yupin Superior weather Cover Paint 20 ltrs
Description;
Yupin Superior weather Cover Paint 20 ltrs

Yupin Superior weather Cover Paint 20 ltrs

Yupin Superior weather Cover Paint 1 ltrs 
Description;
Yupin Superior weather Cover Paint 1 ltrs

Yupin Superior weather Cover Paint 1 ltrs

Yupin Super Cover Emulsion/Matt/Super Fast 4 ltrs
Description;
Yupin Super Cover Emulsion/Matt/Super Fast 4 ltrs

Yupin Super Cover Emulsion/Matt/Super Fast 4 ltrs

Yupin Super Cover Emulsion/Matt/Super Fast 20 ltrs
Description;
Yupin Super Cover Emulsion/Matt/Super Fast 20 ltrs

Yupin Super Cover Emulsion/Matt/Super Fast 20 ltrsn

Yupin Super Cover Emulsion/Matt/Super Fast 1 ltrs
Description;
Yupin Super Cover Emulsion/Matt/Super Fast 1 ltrs

Yupin Super Cover Emulsion/Matt/Super Fast 1 ltrs

YUPIN SKIMCOAT FILLA 25 KGS
Description;
YUPIN SKIMCOAT FILLA 25 KGS
Suitable for wall skimming
Suitable for both external and internal use.
All weather(withstands heat and moisture,can be used in bathrooms without peeling off)
Easy to sand and paint.
Packaged in 25 KG
Perfect wall finish
Economical in application
Reduce shrinkage and offers crack-free finish

YUPIN SKIMCOAT FILLA 25 KGS

YUPIN SKIM COAT FILLA 25 KGS
Description;
YUPIN SKIM COAT FILLA 25 KGS
Suitable for wall skimming
Suitable for both external and internal use.
All weather(withstands heat and moisture,can be used in bathrooms without peeling off)
Easy to sand and paint.
Packaged in 25 KG
Perfect wall finish
Economical in application
Reduce shrinkage and offers crack-free finish

YUPIN SKIM COAT FILLA 25 KGS

Yupin Silk Soft White Emulsion 4 ltrs
Description;
Yupin Silk Soft White Emulsion 4 ltrs

Yupin Silk Soft White Emulsion 4 ltrs

Yupin Silk Soft White Emulsion 20 ltrs
Description;
Yupin Silk Soft White Emulsion 20 ltrs

Yupin Silk Soft White Emulsion 20 ltrs

Yupin Silk Soft White Emulsion 1 ltrs
Description:
Yupin Silk Soft White Emulsion 1 ltrs

Yupin Silk Soft White Emulsion 1 ltrs

Yupin Silk Brilliant White Emulsion 4 ltrs
Description;
Yupin Silk Brilliant White Emulsion 4 ltrs

Yupin Silk Brilliant White Emulsion 4 ltrs

Yupin Silk Brilliant White Emulsion 20 ltrs
Description;
Yupin Silk Brilliant White Emulsion 20 ltrs

Yupin Silk Brilliant White Emulsion 20 ltrs

Yupin Silicone Exterior Paint 4 ltrs
Description;
Yupin Silicone Exterior Paint 4 ltrs 
All weather 
Long lasting finish 
superb and eye appealing finish 
Quality and value for your money

Yupin Silicone Exterior Paint 4 ltrs

Yupin Silicone Exterior Paint 20ltrs
Description;
Yupin Silicone Exterior Paint 20 ltrs 
All weather 
Long lasting finish 
superb and eye appealing finish 
Quality and value for your money

Yupin Silicone Exterior Paint 20ltrs

Yupin Seal Concrete Sealer Clear Finish 4 ltrs
Description;
Yupin Seal Concrete Sealer Clear Finish 4 ltrs

Yupin Seal Concrete Sealer Clear Finish 4 ltrs

Yupin Seal Concrete Sealer Clear Finish 20 ltrs
Description;
Yupin Seal Concrete Sealer Clear Finish 20 ltrs

Yupin Seal Concrete Sealer Clear Finish 20 ltrs

Yupin Seal Concrete Sealer Clear Finish 1 ltr
Description;
Yupin Seal Concrete Sealer Clear Finish 1 ltr

Yupin Seal Concrete Sealer Clear Finish 1 ltr

Yupin Seal Concrete Sealer Clear Finish (Transil) 4 ltrs
Description;
Yupin Seal Concrete Sealer Clear Finish (Transil) 4 ltrs

Yupin Seal Concrete Sealer Clear Finish (Transil) 4 ltrs

Yupin Seal Concrete Sealer Clear Finish (Transil) 20 ltrs
Description;
Yupin Seal Concrete Sealer Clear Finish (Transil) 20 ltrs
&nbsp;

Yupin Seal Concrete Sealer Clear Finish (Transil) 20 ltrs

Yupin Seal Concrete Sealer Clear Finish (Transil) 1 ltrs
Description;
Yupin Seal Concrete Sealer Clear Finish (Transil) 1 ltrs

Yupin Seal Concrete Sealer Clear Finish (Transil) 1 ltrs

Yupin Gypsum Filler (Multipurpose) 25 kgs
Description;
Yupin Gypsum Filler (Multipurpose) 25 kgs

Yupin Gypsum Filler (Multipurpose) 25 kgs

Yupin Builders undercoat (Budget Grade) 4 ltrs
Description;
Yupin Builders undercoat (Budget Grade) 4 ltrs

Yupin Builders undercoat (Budget Grade) 4 ltrs

Yupin Builders undercoat (Budget Grade) 20 ltrs
Description;
Yupin Builders undercoat (Budget Grade) 20 ltrs

Yupin Builders undercoat (Budget Grade) 20 ltrs

Yupin Builders undercoat (Budget Grade) 1 ltrs
Description;
Yupin Builders undercoat (Budget Grade) 1 ltrs

Yupin Builders undercoat (Budget Grade) 1 ltrs

Sahara wall skimming filler 25 kgs
Description;
Sahara wall skimming filler 25 kgs
<ul>
<li>Suitable for wall skimming</li>
<li>Easy to sand and paint.</li>
<li>Packaged in 25KG</li>
</ul>

Sahara wall skimming filler 25 kgs

Novel Road Marking Paint 4 Ltrs
Description;
Road Marking Paint 4 Liters

Novel Road Marking Paint 4 Ltrs

Solai Super Gloss Premium Paint (Cool Colours) 4 Ltrs
Description;
Solai Super Gloss Premium Paint (Cool Colours) 4 Ltrs

Solai Super Gloss Premium Paint (Cool Colours) 4 Ltrs

Solai Super Gloss Premium Paint (Cool Colours) 20 Ltrs
Description;
Solai Super Gloss Premium Paint (Cool Colours) 20 Ltrs

Solai Super Gloss Premium Paint (Cool Colours) 20 Ltrs

Solai Super Gloss Premium Paint (Cool Colours) 10 Ltrs
Description;
Solai Super Gloss Premium Paint (Cool Colours) 10 Ltrs

Solai Super Gloss Premium Paint (Cool Colours) 10 Ltrs

Solai Super Gloss Premium Paint (Cool Colours) 1 Ltrs
Description;
Solai Super Gloss Premium Paint (Cool Colours) 1 Ltrs

Solai Super Gloss Premium Paint (Cool Colours) 1 Ltrs

Novel Road Marking Paint 4 Ltrs
Description;
Novel Road Marking Paint 4 Ltrs

Crown super gloss 4 Litre
Description;
Crown super gloss 4 Litre

Crown super gloss 4 Litre

Crown super gloss 1 Litre
Description;
Crown super gloss 1 Litre

Crown super gloss 1 Litre

Tactile Stone Coated Finishing Kit
Description;
Tactile Stone Coated Finishing Kit

Tactile Stone Coated Finishing Kit

<h3>Bitumen Waterproofing Primer 20L – BITUSEAL (Water-Based)</h3>
<h3></h3>
<h3>Description:</h3>
Bitumen Waterproofing Primer (Water-Based) is a ready-to-use surface-preparation coat that improves adhesion before applying bitumen membranes and liquid waterproofing systems. It penetrates concrete and masonry surfaces, seals dust, and provides a strong bond for long-lasting waterproofing performance.
Key Features
<ul>
<li data-start="339" data-end="391">Improves bonding of bitumen coatings and membranes</li>
<li data-start="339" data-end="391">Ideal for concrete roofs, slabs, screeds, and foundations</li>
<li data-start="339" data-end="391">Water-based, low odor, easy to apply</li>
<li data-start="339" data-end="391">Suitable for brush or roller application</li>
<li data-start="339" data-end="391">Fast drying under normal conditions</li>
<li data-start="339" data-end="391">Average coverage: ~0.15 L per m² (depends on surface)</li>
<li data-start="339" data-end="391">Easy cleanup with water while wet</li>
</ul>

Bitumen Waterproofing Primer 20L – BITUSEAL (Water-Based)

<h3>Solvent Based Bitumen Primer BF4 – 20L (for Waterproofing)</h3>
<h3></h3>
<h3>Description:</h3>
Solvent-Based Bitumen Primer BF4 is a high-penetration waterproofing primer that prepares concrete and masonry surfaces before applying torch-on membranes and bitumen coatings. It improves adhesion, seals porous surfaces, and creates a strong bonding base for long-lasting waterproofing systems on roofs, slabs, and foundations.
Key Features
<ul>
<li data-start="356" data-end="403">Deep-penetrating solvent-based bitumen primer</li>
<li data-start="356" data-end="403">Ideal for torch-on and liquid waterproofing systems</li>
<li data-start="356" data-end="403">Improves bonding of bitumen membranes and coatings</li>
<li data-start="356" data-end="403">Fast drying under normal site conditions</li>
<li data-start="356" data-end="403">Suitable for roofs, basements, and concrete slabs</li>
<li data-start="356" data-end="403">Apply by brush, roller, or spray</li>
<li data-start="356" data-end="403">Average coverage: ~0.15 L per m² (surface dependent)</li>
<li data-start="356" data-end="403">Flammable — use with proper ventilation and care</li>
</ul>

Solvent Based Bitumen Primer BF4 – 20L (for Waterproofing)

<h3 class="product_title entry-title">Crown Wallplast Skim Coat Filler 25kg – Internal &amp; External Putty</h3>
<h3></h3>
<h3>Description:</h3>
<div>Crown Wallplast Skim Coat filler is preferred by professional painters, contractors, and interior finishers. It is prized for its workability, effortless application, and robust adhesion. Apply it on interior or exterior surfaces to correct flaws and achieve a paint-ready finish. Its breathable formula is suitable even for surfaces with mild moisture, reducing peeling or blistering after painting.</div>
<div>
Typical Applications
<ul>
<li>Skimming plastered walls before painting</li>
<li>Smoothing concrete surfaces</li>
<li>Filling minor cracks and surface imperfections</li>
<li>Finishing gypsum ceilings and drywall surfaces</li>
<li>Renovation and repainting projects</li>
</ul>
</div>

Crown Wallplast Skim Coat Filler 25kg – Internal & External Putty

<h3>Conta Glue Multipurpose Adhesive 250ml</h3>
<h3></h3>
<h3>Description:</h3>
Conta glue from Henkel is one of the most used adhesives in the World. We sale them in the packages of; 100 ml, 250 ml, 500ml, 1L, 4L.  Conta glue is an excellent glue for joining and bonding materials such wood, plastic, concrete, mdf boards, blockboards and many more
Conta wood glue is great for carpentry and home repairs and bonds stronger on wood.
When you apply conta glue on both surfaces it holds permanently
<h6>Benefits of Conta Glue:</h6>
<ul>
<li>High bonding power,</li>
<li>Attractive appearance.</li>
<li>Quick-drying.</li>
<li>Appearance: White viscous gel or suspension.</li>
<li>Application: By brush or glue rollers.</li>
</ul>

Conta Glue Multipurpose Adhesive 250ml

<h3>Conta Glue Multipurpose Adhesive 500ml</h3>
<h3></h3>
<h3></h3>
<h3>Description:</h3>
Conta glue from Henkel is one of the most used adhesives in the World. We sale them in the packages of; 100 ml, 250 ml, 500ml, 1L, 4L.  Conta glue is an excellent glue for joining and bonding materials such wood, plastic, concrete, mdf boards, blockboards and many more
Conta wood glue is great for carpentry and home repairs and bonds stronger on wood.
When you apply conta glue on both surfaces it holds permanently
<h4>Benefits of Conta Glue:</h4>
<ul>
<li>High bonding power,</li>
<li>Attractive appearance.</li>
<li>Quick-drying.</li>
<li>Appearance: White viscous gel or suspension.</li>
<li>Application: By brush or glue rollers.</li>
</ul>

Conta Glue Multipurpose Adhesive 500ml

<h3 class="product_title entry-title">Duracoat Skimcoat Filler – Internal &amp; External</h3>
<h3></h3>
<h3>Description:</h3>
Duracoat Internal and External Skim Coat is a water-resistant white cement-based putty which provides a strong base on concrete/mortar walls and ceilings. It fills the pores of the walls and ceilings, thereby providing a white, smooth and dry surface for painting. Being water resistant, it provides a protective base which prevents expensive paint from flaking. Duracoat Internal and External Skim Coat has special added polymers and more adhesive strength which provides a strong base ensuring a longer life of the painted surface. It can be applied on freshly plastered walls thus saving time
FEATURES
<ul>
<li>Being cementitious it has better adhesiveness and durability with concrete walls</li>
<li>Doesn’t need any kind of primer on it before application of paint thus saving time and cost</li>
<li>Can applied on interior and exterior walls and ceilings</li>
<li>Gives a white and smooth finish surface which effectively reduce the consumption of subsequent pints</li>
<li>Does not require any water curing after application it is eco­friendly. It does not contain lead, oil or toxic material</li>
</ul>

Duracoat Skimcoat Filler – Internal & External

<h3>Sand Paper Roll 25M Grit P80, P100, P120</h3>
<h3></h3>
<h3>Description:</h3>
Sandpaper and glass paper are names used for a type of coated abrasive that consists of sheets of paper or cloth with abrasive material glued to one face. Despite the use of the names neither sand nor glass are now used in the manufacture of these products as they have been replaced by other abrasives such as aluminum oxide or silicon carbide. Sandpaper is produced in a range of grit sizes and is used to remove material from surfaces, either to make them smoother (for example, in painting and wood finishing), to remove a layer of material (such as old paint), or sometimes to make the surface rougher (for example, as a preparation for gluing). It is common to use the name of the abrasive when describing the paper, e.g. “aluminum oxide paper”, or “silicon carbide paper”.

Sand Paper Roll 25M Grit P80, P100, P120

<h3 class="product_title entry-title">JK Skim Coat Filler Skimmax 25Kg</h3>
<h3></h3>
<h3>Description:</h3>
JK skim coat filler is a white cement based filler often used in construction and renovation projects to create smooth, even surfaces on walls and ceilings. It is typically applied over plasterboard, concrete, or other substrates to fill in imperfections, such as cracks, holes, or uneven textures. The skim coat filler can be applied in thin layers, allowing for a smooth finish that is ideal for painting or wallpapering. It is praised for its ease of application and quick drying time, making it a popular choice among professionals and DIY enthusiasts alike. When using JK skim coat filler, it’s important to follow the manufacturer’s instructions for the best results, ensuring a durable and aesthetically pleasing surface.

JK Skim Coat Filler Skimmax 25Kg

<h3>Hada Gypsum Filler Wall Skimming Plaster 25Kg</h3>
<h3></h3>
<h3>Description:</h3>
<ul>
<li>Suitable for wall skimming</li>
<li>Easy to sand and paint.</li>
<li>Packaged in 25KG</li>
</ul>

Hada Gypsum Filler Wall Skimming Plaster 25Kg

<h3>Sahara Wall Skimming Filler 25Kg</h3>
<h3></h3>
<h3></h3>
<h3>Description:</h3>
Sahara wall filler is a skimming and joint filler that offers smooth surfaces and dries quickly.
Wall skimming is a great way to make ugly walls and ceilings new again! A skim coat, also known as a level-five finish, is a thin coat of diluted joint compound that can be applied by hand, paint roller or spray rig. Then it’s smoothed out by using a drywall knife or trowel. It’s an easy way to create flat and uniform surfaces on walls and ceilings so they can be painted or re-textured. As a rule of thumb, you should apply at least two skim coats to achieve a smooth and consistent surface.

Sahara Wall Skimming Filler 25Kg

<h3>Gyproc Gypsum Filler 25kg Multipurpose Plaster</h3>
<h3></h3>
<h3>Description:</h3>
Gyproc filler is gypsum-based setting material for bulk and secondary filling of plasterboard joints. A low shrinkage product for hand application, with 60 minutes working time. It can be used in stages 1 and 2 of the traditional 3-stage jointing process.
Gyproc filler produce a smooth, continuous, crack-resistant lining surface ready for priming and final decoration. A number of jointing specifications are available to suit the board type, site preference and method of application. When taping and jointing, Gyproc Joint Filler is suitable for application of the taping coat only. It sets to a hard finish and is ideal for use on plasterboard joints under Gyproc Finish Plasters
Joint filling is an important process in many structures such as Buildings, Masonry Walls. A joint filler for use in joints between structural elements comprising at least one layer of a substantially non-compressible, moisture blocking material; at least two layers of a compressible and resilient, moisture blocking material, each layer being in surface to surface contact with a layer of non-compressible material. The layers of material are combined to form a strip of interleaved compressible and non-compressible layers, and in an uncompressed state thicker than a joint.

Gyproc Gypsum Filler 25kg Multipurpose Plaster

Glory plastic Distemper 1L
wsg-49047
Description;
Excellent Hiding.
Good Adhesion.
Good Flow and Leveling.
Low VOC and Lead-Free.
Excellent Dry Scrub Resistance.

Glory plastic Distemper 1L

Glory plastic Distemper 4L
Wsg-49048
Description;
Excellent Hiding.
Good Adhesion.
Good Flow and Leveling.
Low VOC and Lead-Free.
Excellent Dry Scrub Resistance.

Glory plastic Distemper 4L

Glory plastic Distemper 20L 
Wsg-49049
Description;
Excellent Hiding.
Good Adhesion.
Good Flow and Leveling.
Low VOC and Lead-Free.
Excellent Dry Scrub Resistance.

Glory plastic Distemper 20L

Glory Paints Plastic Emulsion 1L 
WSG-49050
Description;
Glory Paints Plastic Emulsion 1L

Glory Paints Plastic Emulsion 1L 

Glory Paints Plastic Emulsion 4L 
WSG-49051
Description;
Glory Paints Plastic Emulsion 4L

Glory Paints Plastic Emulsion 4L

Glory Paints Plastic Emulsion 20L 
WSG-49052
Description;
Glory Paints Plastic Emulsion 20L

Glory Paints Plastic Emulsion 20L

Glory paints Cover Emulsion 0.5L
WSG-49053
Description;
Glory paints Cover Emulsion 0.5L

Glory paints Cover Emulsion 0.5L

Glory paints Cover Emulsion 1L
WSG-49054
Description;
Glory paints Cover Emulsion 1L

Glory paints Cover Emulsion 1L

Glory paints Cover Emulsion 4L
WSG-49055
Description;
Glory paints Cover Emulsion 4L

Glory paints Cover Emulsion 4L

Glory paints Cover Emulsion 20L
Wsg-49056
Description;
Glory paints Cover Emulsion 20L

Glory paints Cover Emulsion 20L

WACKER® GS &#8211; GENERAL SANITARY
WSG-49066
Description;
WACKER® GS &#8211; GENERAL SANITARY is a one-part, acetoxy silicone sealant for general purpose sealing. This product is mildew resistant and therefore particularly suitable for sanitary applications.
&nbsp;
WACKER® GS &#8211; GENERAL SANITARY cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.
&nbsp;
&nbsp;

WACKER® GS - GENERAL SANITARY

WACKER® GP &#8211; GENERAL PURPOSE SEALANT 280ml
WSG-49067
Description;
WACKER® GP &#8211; GENERAL PURPOSE is a one-component, acid-curing, silicone sealant for general purpose sealing.
&nbsp;
WACKER® GP &#8211; GENERAL PURPOSE cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber

WACKER® GP - GENERAL PURPOSE SEALANT 280ml

Wacker® CS – Construction Seal 7
WSG-49068
Description;
WACKER® CS – CONSTRUCTION SEAL 7 is a one-part, neutral low modulus silicone sealant with outstanding adhesion for construction and exterior weather sealing applications.
&nbsp;
Properties
&nbsp;
WACKER® CS – CONSTRUCTION SEAL 7 cures at room temperature in the presence of atmospheric moisture to give a permanent flexible silicone rubber.
&nbsp;
Special features
&nbsp;
Almost odorless
Matt finish
Long shelf life
Non-sag
Excellent tooling characteristics for professional use
Readily gunnable both at low (+5 °C) and high (+40 °C) temperatures
Rapid crosslinking: quickly becomes tack-free and crack resistant
Solvent-free, thus featuring low volume shrinkage during cure
Flexible at low (-40 °C) and high temperatures
(+150 °C) following cure
Excellent weatherability
Non-corrosive to metals and suitable for alkaline substrates such as concrete, mortar, fibrous cement
Application
&nbsp;
Sealing of connection and expansion joints
Suitable for weather sealing of many construction materials (e.g. glass, aluminium, stell, stone, concrete plastics)
Packaging
&nbsp;
WACKER® CS – CONSTRUCTION SEAL 7 is usually supplied in standard size cartridges that fit all standard caulking guns. Additionally, it is available in convenient sausages.
&nbsp;
Safety notes
&nbsp;
Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from WACKER subsidiaries.
&nbsp;
During vulcanization methanol and ethanol are released. These vapours should not be inhaled for long periods or in high concentration. Hence, good ventilation of the workplace is necessary.
&nbsp;
Should uncured silicone rubber come into contact with eyes or mucous membranes, the affected area must be rinsed thoroughly with water as irritation will otherwise be caused. Avoid prolonged contact of uncured sealant with the skin – use a dry cloth or paper to remove it.
&nbsp;
Keep out of reach of children. Cured silicone rubber, however, can be handled without any risk to health.

Wacker® CS – Construction Seal 7

Crown Thinner For Two – Pack Polyurethane 1 lts
WSG-49069
Description;
Crown Thinner For Two – Pack Polyurethane 1 lts

Crown Thinner For Two – Pack Polyurethane 1 lts

Crown Standard Thinner
WSG-49070
Description;
Crown Standard Thinner

Crown Standard Thinner

Crown Roadline Paint
WSG-49071
Description;
Crown Roadline Paint
&nbsp;
A matt, durable, hardwearing finish designed for use for traffic lines and sign markings on general road surfaces and parking spaces. A reflective finish can be achieved, if required, by sprinkling Ballotini beads on to the wet paint film or by thoroughly dispersing Ballotini in the paint prior to application.
&nbsp;
Characteristics:
&nbsp;
Manufactured from high-quality pigments and a mixture of high-quality resins for added durability.
&nbsp;
Advantages: Excellent adhesion. Good flexibility and quick drying.
&nbsp;
Finish: Matt.
&nbsp;
Application: By brush or spraying machine.
&nbsp;
Thinning &amp; Mixing: Crown Road Marking Thinner. Stir well before use. Avoid overthinning.
&nbsp;
Drying Time: 4 -10 minutes.
&nbsp;
Spreading Capacity: 2½ – 3 m2/l @175µm WFT as per KEBS specification.
&nbsp;
Colour range: White, Yellow and Black.
&nbsp;
Equipment Cleaner: Crown Road Marking Paint Thinners.
&nbsp;
Pack Sizes: 1 litre, 4 litres

Crown Roadline Paint

Crown White Spirit
WSG-49072
Description;
Crown White Spirit is used with most solvent-based decorative primers and finishes including:
&nbsp;
Gloss and Eggshell enamels
Undercoats and Primers for wood
Metal and plaster
Roof and Floor Paints
Aluminium and Bituminous Paints
Single pack varnishes and stains
Whilst inferior quality thinners can be used for cleaning equipment, it is important to use only Crown White Spirit for thinning as the use of inferior materials will affect the performance of the paint both with regard to the appearance of finish and drying characteristics.
&nbsp;
UNIQUE SELLING POINT (USP)
Slow-drying hence not evaporating fast, thus aiding adhesion of coatings to surfaces
Excellent prevention of paint from hardening and ruining the bristles
Wide range of products including gloss and eggshell enamels, undercoats and primers, roof and floor paints, bituminous and single pack varnishes and stains
Excellent cleaning properties
SKU: N/A Category: Primers, Thinners and Undercoats

Crown White Spirit

Crown Tp Acrylic Roadline semi gloss Black 4 ltrs
WSG-49073
Description;
Crown Tp Acrylic Roadline semi gloss Black 4 ltrs

Crown Tp Acrylic Roadline semi gloss Black 4 ltrs

Hymeg AD12 Insulating Varnish
WSG-49074
Description;
A hard curing insulating varnish with excellent penetration, bond strength and resistance to moisture and corrosive materials. Designed for use as a general-purpose insulating varnish for stators, transformers and rotating parts for Class A (105oC) through to Class H applications (180oC).
Characteristics: Based on modified polyester resin.
Advantages: High bonding strength and penetration. Excellent moisture and chemical resistance.
Appearance: Clear fluid.
Application: By immersion.
Thinning: No thinning required; supplied ready for use
Equipment Cleaner: Xylene.
Pack Sizes: 5 litres
Drying Time: 1 hour @ 165oC.
SURFACE PREPARATION: Ensure that the surface is dry and free from all oil, grease, dirt, etc.
For health &amp; safety information, please refer to our Material Safety Data Sheet (MSDS).

Hymeg AD12 Insulating Varnish

Crown Rust Remover 5L
WSG-49075
Description;
A water-based solution of surfactants and organic acids in water specially formulated for the safe and effective removal of rust from ferrous metal objects.
&nbsp;
Key features: Will not harm skin. Will not damage paintwork. Removes rust overnight
&nbsp;
Limitations: Not suitable for direct contact with non-ferrous metals or galvanised surfaces. Crown Rust Remover will strip galvanising from these metal objects.
&nbsp;
Appearance: Green Liquid
&nbsp;
Surface preparation: Use a wire brush or coarse abrasive paper to remove loose rust. Remove oil and grease contamination using Crown White Spirit.
&nbsp;
Application
&nbsp;
Diluted Rust Remover: Shake the container well and pour the required amount into a plastic container. Dilute 1 part Crown Rust Remover with 9 parts water and mix thoroughly. Immerse the rusty item in the solution overnight. Remove and rinse thoroughly under running water using a wire brush to remove any residual rust. If the rust has not been completely removed repeat procedure and leave for 24 hours. Leave to dry and overcoat with a suitable finish. For heavy or stubborn rust deposits, use Crown Rust Remover without dilution
&nbsp;
Undiluted Rust Remover: Shake the container well and pour the required amount into a plastic container. Immerse the rusty item overnight or until the rust has dissolved, whichever is sooner. Rinse in clean fresh water, abrade with coarse abrasive paper and dry with a clean cloth. Leave to dry and overcoat with a suitable finish
&nbsp;
NOTE: Do not return any surplus Crown Rust Remover after use.

Crown Rust Remover 5L

Crown Paint &amp; Varnish Remover 5L
WSG-49076
Description;
Crown Paint and Varnish Remover is designed to strip old, loose and wrinkling paint and varnish. When used correctly it will remove all types of oil-based paints such as gloss and eggshell enamels, undercoats, primers etc in addition to Nitrocelloluse and a number of industrial finishes. Crown Paint and Varnish Remover can also be used on water-based paints. Its efficacy will be greatly reduced when used to remove old coatings, Stoving and 2-pack paints, where more than one coat may be required in sound condition.
&nbsp;
Crown Paint and Varnish Remover is non-inflammable, is entirely free from caustic or alkali and, when used on timber, will not injure the grain. It should, however, be used with care especially in confined spaces, and kept away from naked flames or red-hot surfaces which would cause acidic fumes, unpleasant to inhale.
&nbsp;
Crown Paint &amp; Varnish Remover is supplied in thixotropic form and can be used on paints applied to metal, wood and plaster surfaces.
&nbsp;
DIRECTIONS FOR USE
Apply the paint remover generously with an ordinary brush, avoiding unnecessary splashing of the skin or other surfaces. Leave for at least 15 minutes then remove the paint with a scraper or shave hook. When removing several coats of paint, additional applications may be necessary. The paint remover will continue to be active for a considerable time after application.
&nbsp;
After all paint has been stripped, the surface should be wiped clean with Crown White Spirit and then allowed to dry thoroughly before overcoating.
&nbsp;
IMPORTANT
Avoid contact with skin. Shake the tin well before use and open carefully, away from the face. Store in a cool place, away from light, out of reach of children and animals.

Crown Paint & Varnish Remover 5L

Crown Mordant Solution / Passivating Wash 5L
WSG-49077
Description;
A single-pack acidic wash which, when applied to new galvanized surfaces, produces a reaction which aids adhesion of subsequent paint coatings.
&nbsp;
The surfaces will blacken if the wash is functioning correctly – contaminated areas will not show any change in colour, so indicating a further application is required.
&nbsp;
Characteristics: An aqueous solution of phosphoric acid containing copper salts.
&nbsp;
Advantages: Keys galvanized surfaces, therefore enhancing adhesion of primer. Good indicator of surface cleanliness. Easy to apply by brush and is economical.
&nbsp;
Finish: Matt.
&nbsp;
Application: By brush. Do not apply by spray.
&nbsp;
Thinning: Use as supplied by brush, do not thin.
&nbsp;
Spreading Capacity: 18-20 m2/l when applied to smooth, non-porous surfaces.
&nbsp;
Drying Times: 5-15 minutes.
&nbsp;
Equipment Cleaner: Water.
&nbsp;
Colour range: A light blue solution which, when applied, creates a semi-transparent blue/black effect.
&nbsp;
Pack Sizes: 5-litre containers.
SPECIFICATIONS
&nbsp;
New, unpainted Galvanized surfaces: Degrease the surface using Crown White Spirit and allow to dry. Apply a wash coat of Crown Mordant Solution and leave for a minimum of one hour. Rinse thoroughly with clean water to remove excess acid and allow to dry.
&nbsp;
Caution: This material is acidic and is harmful to the skin. Gloves and goggles should be worn during application. In case of contact with skin or clothing, the affected parts should immediately be washed with water.

Crown Mordant Solution / Passivating Wash 5L

Crown Fungicidal Wash 5L
WSG-49078
Description;
Crown Fungicidal Wash is an aqueous solution of biocide, designed to treat mould growth and algae on decorated surfaces. When applied to previously painted walls, ceilings etc, Crown Fungicidal Wash will destroy and sterilized both the growth and the spores present on the surface.
&nbsp;
Comprehensive instructions relative to the treatment of mould growth and algae are available under the Technical Data – Defects &amp; Remedies

Crown Fungicidal Wash 5L

Crown Silicone Water Proofing Solution
WSG-49079
Description;
The transparent solution is designed for use on exterior masonry including porous surfaces. Does not prevent the wall from breathing whilst providing an effective waterproof barrier. This does not alter surface appearance. Remains effective for 5-10 years. Recommended for use on new and unpainted fair-faced concrete, cement rendering, brick, stone etc.
Characteristics: Silicone resin dispersed in solvent.
Advantages: Waterproof exterior masonry. Allows trapped moisture to escape. Does not alter surface appearance or texture. Effective for a long time.
Application: Brush or spray. Apply generously; flood the surface to cause a run down of about one-foot (300 mm). If spray applied, use the minimum pressure to prevent atomization. A mask should be worn as concentrations of the solvents on prolonged use may cause temporary dizziness or sickness if inhaled.
Thinning: Supplied ready for use.
Drying Times: Surface dry 1 hour. Re-coatable after 16 hours.
Spreading Capacity: 2-5 m2/l depending on surface texture and porosity.
Equipment Cleaner: Crown White Spirit.
Colour range: Clear.
Pack Sizes: 5 litres, 20 litres.
SPECIFICATIONS:
Prepare surface (refer application above). Ensure all surfaces are covered.
Notes:Should not be used on wood, canvas or fabrics.
Splashes on painted surfaces should be removed with a rag dipped in Crown White Spirit.

Crown Silicone Water Proofing Solution

Two Pack Epoxy Coal Tar Composition
WSG-49080
Description;
A high performance coating designed to protect steelwork from corrosion and concrete from ingress of moisture. Particularly suitable for coating the interior of water storage tanks, (must not be used on the interior of drinking water tanks) ships hulls, underwater steel structures, crude oil/sea water, blast tanks and the inside of pipes i.e. for sewerage hydroelectric stations etc. Attains maximum hardness and chemical resistance after 4 -5 days of application.
&nbsp;
Characteristics: A combination of Epoxy Resin and pitch in a two-pack form with polyamide curing agent.
&nbsp;
Advantages: Superior adhesion and water impermeability combined with excellent chemical, water and corrosion resistance. High build film with normal application.
&nbsp;
Finish: Gloss.
&nbsp;
Application: By brush or spray.
&nbsp;
Thinning &amp; Mixing: Incorporate both portions (base and catalyst) as supplied and stir thoroughly. Alternatively smaller quantities can be mixed strictly in accordance with mixing ratios indicated on the container. Allow to stand for 15-20 minutes before use.
&nbsp;
Where necessary to ease brushing and for spray application, thin to the required consistency with Crown Two-Pack Epoxy Thinners. After thinning stir thoroughly before use.
&nbsp;
Ensure that only sufficient material to use in one working day is mixed, as the â€œpot lifeâ€ of the combined material is limited to 24 hours maximum.
&nbsp;
Drying Times: Touch dry 4-6 hours. Recoatable within 24 hours in well-ventilated conditions. Do not allow the film to harden for more than 96 hours between coats to ensure good inter-coat adhesion. Full cure 4 -5days at ambient conditions.
&nbsp;
Spreading Capacity: 3-4 m2/l when applied to a smooth, non-porous surface at 100-125 microns dry film thickness, subject also to operating conditions and techniques.
&nbsp;
Equipment Cleaner: Crown Two-Pack Epoxy Thinners.
&nbsp;
Colour range: Black and Brown only.
&nbsp;
Pack Sizes: 4 litres (base and catalyst combined)
&nbsp;
SPECIFICATIONS
&nbsp;
Metal Surfaces Steelwork: Prepare surface (refer Data Sheet SP 3). Apply one liberal coat of Crown Two-Pack Zinc Rich Primer. Apply 3-4 coats of Crown Coal Tar Pitch Epoxy Composition (Two-Pack).
&nbsp;
New and Bare Concrete: Prepare surface (refer Data Sheet SP 1). Ensure surface is dry. Apply 2-3 coats of Crown Coal Tar Pitch Epoxy Composition (Two-Pack).
&nbsp;
Note:
&nbsp;
1. Allow 7 days to fully cure before filling water tanks, pools etc.
&nbsp;
2. Do not use in drinking water tanks, fishponds etc.
&nbsp;
3. Do not apply over surfaces previously painted with finishes other than epoxy.
&nbsp;
Safety Precautions: Breathing masks should be worn during application. A free flow of air should be provided when working in confined atmosphere as the vapours of this material are toxic, and may cause dizziness or sickness if inhaled in concentration.

Two Pack Epoxy Coal Tar Composition

Crown Black Bituminous 1 ltrs
WSG-49081
Description;
A black bituminous paint especially suitable for the interior coating of drinking water tanks, but may be used on general water tanks and pipework. Recommended where a protective and economical finish is required. Can be applied to most surfaces including iron and steelwork, cement renderings, brick, stone etc.
Characteristics: A heavy-duty, anti-corrosive bituminous solution.
Advantages: Economical. Non-toxic. A waterproof composition which fills minor pits, cracks and other irregularities, forming a smooth coating.
Finish: Semi-gloss.
Application: By brush.
Thinning: Use as supplied on non-porous surfaces. On porous, uncoated masonry thin to ease brushing with Crown White Spirit. Avoid over thinning. Stir well before use.
Drying Times: Surface dry: 2 hours. Recoatable: 14 hours. Hard dry several days.
Spreading Capacity: Smooth metal surfaces approximately 10-11 m2/l. Cement rendering, approximately 7-8 m2/l. The spreading capacity will be considerably reduced when applied on rough, porous surfaces.
Equipment Cleaner: Crown White Spirit.
Colour range: Black.
Pack Sizes: 1 litre, 4 litres and 20 litres.
SPECIFICATIONS
New Metal and Galvanized Drinking Water Tanks: Prepare surface (refer Data Sheet SP 3). Apply 1 coat Crown Zinc Phosphate Primer. Apply 3 coats Crown Black Bituminous Paint.
General – Purpose use on New Iron and Steelwork: Prepare surface (refer Data Sheet SP 3). Apply 1 coat (appropriate) primer. Apply 2-3 coats Crown Black Bituminous Paint.
New (dry) and unpainted Plaster, Cement rendering, Brick, Stone: Prepare surface (refer Data Sheet SP 1). Apply 3 coats Crown Black Bituminous Paint, thinning the first coat to ease brushing and improve adhesion.
Previously Painted Surfaces: Prepare surface and patch prime bare metal surface with the appropriate Crown primer. Apply 2 coats Crown Black Bituminous Paint.
Note:Coated water tanks should be flushed out with clean water before use

Crown Black Bituminous 1 ltrs

Crown Bituminous Aluminium
WSG-49082
Description;
An exterior protective coating that can be applied to metal, wood and concrete surfaces. Ideal for use on metal pipes, tanks, structural steelwork, corrugated and flat galvanized roof sheets, bitumen based roofing felt, etc. Surfaces previously painted with bitumen-based paints can be overcoated with Crown Aluminium Bituminous Paint to produce a metallic, reflective finish.
&nbsp;
Characteristics: Manufactured from a high-grade bitumen and leafing aluminium pigment, incorporated in a synthetic resin.
&nbsp;
Advantages: Durable and extremely flexible. Reasonable chemical resistance to mild fumes or spillage. Good adhesion to most surfaces. Application on storage tanks will reduce evaporation losses. Easy to apply. The incorporation of the aluminium pigment improves the UV radiation resistance of the bitumen.
&nbsp;
Finish: Metallic lustre.
&nbsp;
Application: By brush or spray.
&nbsp;
Thinning: Supplied ready for use by brush application. Thin with Crown White Spirit for spray application. Stir well before use.
&nbsp;
Drying Times: Surface dry in 3-4 hours but will remain fairly soft for a few days. Re-coatable in 16 hours.
&nbsp;
Spreading Capacity: 11-14 m2/l when applied by brush on smooth surfaces.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: Metallic Grey.
&nbsp;
Pack Sizes: 4 litres and 20 litres.
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa and Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS
&nbsp;
General Purpose Use on Iron and Steelwork: Prepare surface (refer Data Sheet SP 3). Apply 1 coat (appropriate) metal primer to new and bare surfaces. Apply 2-3 coats Crown Aluminium Bituminous Paint.
&nbsp;
Galvanized Iron Surfaces: New/unweathered G.I. should be thoroughly degreased (refer Data Sheet SP 3) and should then be coated with either Crown Etch Primer or Crown Zinc Phosphate Primer. Weathered G.I. does not require priming – normal surface preparation should be performed. Apply 2-3 coats Crown Aluminium Bituminous Paint.
&nbsp;
Plaster, Cement: Prepare surface (refer Data Sheet SP 1). New and unpainted plaster etc, should be coated with 1 coat Crown Alkali-Resisting Primer ensuring that the surface is dry. Apply 2-3 coats Crown Aluminium Bituminous Paint.

Crown Bituminous Aluminium

Crown Heat Resisting Aluminium (up to 200 C) 4 ltr
WSG-49083
Description;
A single pack, high temperature coating formulated with a leafing aluminum pigment and silicone vehicle that withstands temperatures up to 220°C. Widely used on steelwork which requires paint with good heat resistance; un-insulated chimney stacks, retorts, exhausts, jet engines, boiler fronts, kilns, high pressure steam lines, furnaces, boilers, kilns, metal fireplaces, grills and other hot metal surfaces requiring a heat resistant protective coating. It forms a super durable porcelain-like bond on surfaces at high temperatures and offers excellent resistance to gasoline, rust, salt spray, oil, grease and humidity. The heat resistant properties of this material only develop after heating to 200°C.
&nbsp;
Characteristics: Leafing aluminium pigment in a special synthetic medium.
&nbsp;
Advantages: Durable. Dries to a brilliant, glossy, silver finish. Tough cured finish resists oil, gas, grease, rust, salt, humidity and solvents. Good adhesion, flexibility and reflectivity. Good corrosion and heat resistance. Will not blister, flake, crack or peel at temperatures up to 220°C. Lead and chromate free.
&nbsp;
Limitations: May only be overcoated by itself.
&nbsp;
Finish: Metallic Silver
&nbsp;
Application: Apply by brush, roller, conventional or airless spray. Roller application may require special care to prevent bubbling and more than one coat to obtain proper film thickness. Two coats recommended for best results.
&nbsp;
Thinning: Supplied ready for use for brush application on normal surfaces. For spray application thin with Crown Industrial Thinner. Stir well before use.
&nbsp;
Drying Times: Recoatable in 16 hours.
&nbsp;
Spreading Capacity: 8 – 10 m2/l when applied on a smooth, non-porous surface.
&nbsp;
Heat resistance: Up to 220°C.
Equipment Cleaner: Crown Industrial Thinner
Colour range: Silver.
Pack Sizes: 4 litres and 20 litres.
Specifications:
New Surfaces i.e. Steelwork, Galvanized Iron: Prepare surface (refer appropriate surface preparation Data Sheet). Apply 2 coats of Crown Aluminium Heat Resistant Paint.
Previously Painted Surfaces: Prepare surface (refer appropriate surface preparation Data Sheet). Apply 1-2 coats Crown Aluminium Heat Resistant Paint.

Crown Heat Resisting Aluminium (up to 200 C) 4 ltr

Crown Aluminium (Leafing) Paint
WSG-49084
Description;
Designed for exterior and interior use on iron and steelwork. Provides good resistance to heat, damp conditions and salt water. Crown Aluminium Paint possesses excellent heat reflecting properties and will considerably reduce evaporation losses when used on storage tanks. In tropical climates, corrugated iron and metal roofs on houses, factories, stores, etc, can be coated with Crown Aluminium Paint to reduce the interior temperature.
Characteristics: Leaf Aluminium pigment in a special synthetic medium.
Advantages: Good heat resistance. Excellent protective, obliterating and spreading powers. Easy to apply.
Finish: Metallic lustre.
Application: Brush or spray.
Thinning: Supplied ready for use for brush application on normal surfaces. For spray application thin with Crown White Spirit. Stir well before use.
Drying Times: Recoatable in 16 hours.
Spreading Capacity: 15-18 m2/l when applied on a smooth, non-porous surface.
Heat resistance: Up to 150°C.
Equipment Cleaner: Crown White Spirit.
Colour range: Silver.
Pack Sizes: ½ litre, 1 litre, 4 litres and 20 litres.
Specifications
New Surfaces i.e. Steelwork, Galvanized Iron: Prepare surface (refer appropriate surface preparation Data Sheet). Apply 1 coat (appropriate) primer. Apply 2 coats of Crown Aluminium Paint.
Previously Painted Surfaces: Prepare surface (refer appropriate surface preparation Data Sheet). Patch prime bare surfaces only with the appropriate primer. Apply 1-2 coats Crown Aluminium Paint.
Hot Metal Surfaces 150°C: Prepare surface (refer Data Sheet SP 3). Apply 2-3 coats Crown Aluminium Paint (omitting primer).
&nbsp;

Crown Aluminium (Leafing) Paint

Crown Two Pack Epoxy Enamel Clear 1 ltrs
WSG-49085
Description;
A high-performance coating supplied in a two-pack form offering maximum resistance against abrasion, chemical attack and water penetration. Recommended for INTERIOR use on prepared metal (primed), wood and plaster/concrete surfaces in chemical plants, laboratories, hospitals, dairies, breweries, food factories, bottling plants etc, and for general use in high traffic areas in public buildings. An ideal industrial finish for coating wooden and metal furniture, machinery and other manufactured items.
&nbsp;
Do not apply over surfaces previously painted with oil paints i.e. gloss, eggshell etc.
&nbsp;
The Two-Pack Enamel, which is mixed shortly before use with the catalyst/hardener, does not attain maximum hardness and chemical resistance until 3 -4 days after application (at a temperature of 22Â°C).
&nbsp;
Characteristics: Manufactured from high quality pigments finely ground in a combination of epoxy resins. Poor exterior durability â€“ tends to chalk badly on exposure.
&nbsp;
Advantages: High gloss, abrasion, chemical and solvent resistant finish. Resistant to mild acids, alkalis and water.
&nbsp;
Finish: High Gloss.
&nbsp;
Application: By brush, roller or spray. (When applying by spray facemasks must be worn).
&nbsp;
Thinning &amp; Mixing: The two components (base and catalyst) must be mixed together to produce 4 litres of material – alternatively smaller quantities can be mixed strictly in accordance with the mixing ratios indicated on the container (the mixing ratios vary slightly depending on the colour in use).
&nbsp;
Stir well and allow to stand for 15-20 minutes before use. Ensure that only sufficient material to use in one working day is mixed, as the pot-life of the combined mixture is limited to approximately 12 hours.
&nbsp;
The mixed material will require to be thinned with Crown Two Pack Epoxy Thinners for spray application and for first coat work on porous surfaces, particularly on concrete and plaster.
&nbsp;
Drying Times: Surface dry 2-3 hours. Hard dry/re-coatable in 16 hours. Do not leave longer than 96 hours between coats to avoid adhesion problems. Film attains maximum resistance and hardness after approximately 4 -5days.
&nbsp;
Spreading Capacity: 10-11 m2/l when applied to smooth, non-porous surfaces.
&nbsp;
Equipment Cleaner: Crown Two-Pack Epoxy Thinners.
&nbsp;
Colour range: White (ex-stock). Other shades, chosen from the BS 4800 colour card, supplied on demand.
&nbsp;
Pack Sizes: 4 litres (base and catalyst combined)

Crown Two Pack Epoxy Enamel Clear 1 ltrs

Crown Chlorinated Rubber Paint White 4ltrs
WSG-49086
Description;
Crown Chlorinated Rubber Paint White 4ltrs

Crown Chlorinated Rubber Paint White 4ltrs

Crown Acrylic Tennis Court Paint
WSG-49087
Description;
Designed especially for use on concrete floor screeds on areas to be used for tennis and badminton courts, basketball, gymnastics etc.
&nbsp;
Characteristics: Manufactured from a high quality copolymer emulsion incorporating carefully selected pigments.
&nbsp;
Advantages: Can be applied to new (dry) screeds. Creates desired colour effect. Matt finish provides good foot grip. For interior and exterior use.
&nbsp;
Finish: Matt.
&nbsp;
Application: Brush application is recommended. Brush the first coat well into the surface to guarantee good adhesion.
&nbsp;
Thinning: The 1st coat should be thinned with clean water to ease brushing and to aid penetration into the floor screeds. Subsequent coats can be thinned if necessary with a little clean water. Avoid overthinning. Stir well before use.
&nbsp;
Drying Times: Re-coatable in 4 hours.
&nbsp;
Spreading capacity:When applied on good wood float floor screeds Crown Tennis Court Paint will cover 8-10 m2/l. When applied to a Tarmacadam surface the spreading capacity will be considerably reduced – approximately 5m2/l.
&nbsp;
Equipment Cleaner: Water.
&nbsp;
Colour range: Supplied in special Tennis Court Green for the playing surface. Also available in Copper for use on concrete areas surrounding the playing area. Line markings can be painted in Crown Road Marking Paint.
&nbsp;
Pack Sizes: 4 litres and 20 litres.

Crown Acrylic Tennis Court Paint

Crown Squash Court Paint
WSG-49089
Description;
High-quality and extremely hardwearing oil based finish specially designed for use on squash courts. Crown Squash paint has a satin finish designed to restrict glare and is suitable for application on all playing surfaces.
&nbsp;
Unlike the emulsion paints and Chlorinated Rubber paint, which are highly thermoplastic and tend to hold the ball, thereby slowing the game, Crown Squash Court paint conforms to the requirements of the British Squash Rackets Association.
&nbsp;
Characteristics: High-quality oil paint based on a special alkyd resin medium and superior pigments.
&nbsp;
Advantages: A durable smooth, satin finish. Resists dirt and is easily cleaned. Does not affect ball bounce.
&nbsp;
Finish: Low sheen
&nbsp;
Application: By roller, spray or brush.
&nbsp;
Thinning: If necessary thin with a little Crown White Spirit to ease application. Thin to the required viscosity for spray application. Stir well before use.
&nbsp;
Drying Times: Re-coatable in 16 hours.
&nbsp;
Spreading Capacity: 12-14 m2/l. 9-10 litres of paint should be sufficient to cover the playing surface, measuring approx. 120 square metres.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: Off-White.
&nbsp;
Pack Sizes: 1 litre, 4 litres.

Crown Squash Court Paint

School Board Paint – Green And Black
WSG-49089
Description:
Designed for use on school boards and wrought ironwork but may be used on a variety of other surfaces where a dense matt black finish is required.
&nbsp;
Characteristics: High-quality pigments ground in an alkyd medium.
&nbsp;
Advantages: Excellent covering capacity. Provides a good grip for chalk. Attractive matt finish.
&nbsp;
Finish: Matt.
&nbsp;
Application: By brush, roller or spray.
&nbsp;
Thinning: Where necessary and for spray application thin with Crown White Spirit. Stir well before use.
&nbsp;
Drying Times: Re-coatable in 16 hours.
&nbsp;
Spreading Capacity: 13-15 m2/l when applied to smooth, non-porous surfaces.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: Black and Green.
&nbsp;
Pack Sizes: ½ litre, 1 litre, 4 litres.
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, and Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS
&nbsp;
New Metal Surfaces: Prepare surface (refer Data Sheet SP 3). Apply 1 coat appropriate metal primer. Apply 2 coats Crown School board Paint.
&nbsp;
New Wood Surfaces: Prepare surface (refer Data Sheet SP 4). Apply 1 coat Crown Wood Primer. Apply 2 coats Crown Schoolboard Paint.
&nbsp;
Previously Painted Surfaces: Wash the school board surface with detergent solution, wipe clean and allow to dry. Lightly abrade. Apply 2 coats Crown Schoolboard Paint.

School Board Paint – Green And Black

Crown GP Matt Finish – Black ( Wrought Iron
WSG-49090
Description;
Crown GP Matt Finish – Black ( Wrought Iron)

Crown GP Matt Finish – Black ( Wrought Iron

Crown Stronghold Parquet Adhesive-2530 20 kgs
WSG-49091
Description;
Crown Stronghold Parquet Adhesive-2530 20 kgs

Crown Stronghold Parquet Adhesive-2530 20 kgs

Crown Paint Stronghold Tile Adhesive – 4 Litres
WSG-49092
Description;
Crown Paint Stronghold Tile Adhesive is a high-quality P.V.A adhesive designed to bond glazed, ceramic and vinyl asbestos tiles to wall and floor areas. Can also be used for fixing expanded polystyrene ceiling tiles. Note: Not recommended for use with pure vinyl floor tiles.
&nbsp;
Characteristics of Crown Paint Stronghold Tile Adhesive: A unique formulation incorporating polyvinyl acetate as the binder that imparts the high adhering properties of the product.
&nbsp;
Advantages of Crown Paint Stronghold Tile Adhesive: Attractive appearance, quick-drying, high bonding power, easily cleaned with water as the solvent.
&nbsp;
Appearance: White viscous gel or suspension.
&nbsp;
Application of Crown Paint Stronghold Tile Adhesive: Use a comb trowel.

Crown Paint Stronghold Tile Adhesive – 4 Litres

Crown Stronghold Wood Adhesive-2502 20 kgs
WSG-49093
Description;
Crown Stronghold Wood Adhesive-2502 20 kgs

Crown Stronghold Wood Adhesive-2502 20 kgs

Crown Duco Body Filler 
WSG-49094
Description;
CROWN DUCO BODY FILLER is a special repair and dent filling Polyester Putty, fast drying with excellent adhesion and good sanding properties.
&nbsp;
Duco Light Weight Bodyfiller KIT (Bodyfiller 1Kg +Hardner 20 Grms + Spatula)
&nbsp;
Typical Uses:
&nbsp;
It is specially developed for filling deep scratches and small craters or surface imperfections on metal surfaces. Ideal for Auto-refinishing, used as a repair and dent filler for automobiles and even for levelling of wooden surfaces.
&nbsp;
Type: 2 PACK POLYESTER BASED
&nbsp;
Colour: Light Grey in colour. ( TURNS LIGHT PINK AFTER ADDITION OF CATALYST)
&nbsp;
Finish: Matt
&nbsp;
Get CROWN DUCO BODY FILLER in Nairobi, Kenya from Rangi Paint Store.
You can also enquire for all crown paints prices in nairobi, kenya from Rangi Paint Store.
&nbsp;
Crown Duco Body Filler &#8211; 5 kgs quantity
1
Add to cart
Category: Automotive Tags: Crown Duco Body Filler, Crown Duco Body Filler in nairobi kenya, crown paint, Duco Body Filler
Description

Crown Duco Body Filler

Crown vesta economy skim coat 25kg
WSG-49095
Description;
Crown vesta economy skim coat 25kg

Sika Top Seal 105(powder+liquid)

Product Description

Cementitious

Sika Seal 105 H

Similar Products

Tangit Glue 500 ML

Ksh689

Tangit Glue 50 ML

Ksh189

Tangit Glue 250 ML

Ksh439

Tangit Glue 100 ML

Ksh299

Tangit Glue 1 Litre

Ksh1,199

Premier Bitumen

Ksh3,499

Yupin Wall Master Powder 40KGS With Color

Ksh3,799

Yupin Wall Master Powder 40KGS Plain

Ksh3,499

Yupin Wall Master Paste 30 kgs

Ksh3,799

Yupin Silicone Exterior Paint 1 ltrs

Ksh899

Yupin Ultra Smooth Vinyl Matt Emulsion 4 lts

Ksh3,099

Yupin Ultra Smooth Vinyl Matt Emulsion 20 lts

Ksh11,499