YSZS-810 Syringe Pump
●Three occlusion level for option
●Intelligent recognition of the 10ml、20ml
、30ml、50ml(60ml)
●syringe,can work with any brand syringe
after calibration

YSZS-810 Syringe Pump

Medical Equipment Hub

YSSY-820 Infusion Pump
1.Bubble detector,drop sensor and pressure
sensor can precisely detect tube air bubbles.
2.Unique Voice Alarm system and accurate
injection rate make the injection process
safer and more reliable.
3.HD LCD display working status.
4.Have store many brands IV
sets,Automatically calibration and
compatible with any brand infusion sets.
5.Work mode: ml/h and drop/min, and these
two modes can switch freely.
6.KVO and Bolus functions.

YSSY-820 Infusion Pump

YSOCS-10 10L Oxygen Generator
10L

YSOCS-10 10L Oxygen Generator

YSOCS-5D 5L Oxygen Generator
5L Home Portable Oxygen Concentrator Machine
1-5LPM continuous flow
Oxygen Concentrations : 93% to 95%
Power 320W
Sound Level ≤ 48 dB (nominal)
Size 305(L) X 300 (W) X 535 (H) mm
Weight 16 kg
Function Timer/Running time counter/nebulization
(optional) Alarms Power failure;High/Low pressure;air blockage/Low oxygen purity(Optional)
Altitude up to 12,000 ft (3657 meters)
support use in plateau, mountains and high altitudes

YSOCS-5D 5L Oxygen Generator

YSRFS-100A Plasma surgical system 
Suitable for ENT, Spine and Arthroscopic
procedures

YSRFS-100A Plasma surgical system

YSESU-350Y Surgical Generator
Multi-function ESU with max 7 working
modes;
Dual power output methods by hand switch
or foot switch;
Minimal sticking &amp; carbonization, reduce
the surgery damage,
Auto detection ofimpedance to protect the
patient (REM function).

YSESU-350Y Surgical Generator

TenTabs Zoncare E10 3 Channel Digital ECG Machine With Touchscreen Design
<ol>
<li>Zoncare E10 3-Channel ECG is designed with streamlined functionality to enhance bedside care, supporting caregivers with optimized workflows. It ensures efficient clinical processes and dependable performance for both caregivers and patients.</li>
<li>Support auto-diagnosis and auto-measurement, E10 has imported 280 professional case templates which can help caregivers quickly import diagnostic results.</li>
<li>Preview ECG waveform on the 5-inch touchscreen to check signal quality before printing which help to save printing paper and confirm waveform quality in time.Light-weight body makes it easy to take anywhere. It has a 5-inch high-resolution touch Screen design. Built-in high-resolution thermal printer direct printing, roll paper design. Internal storage up to 5000 and can be exported by USB flash disk.</li>
<li>One-button operation: power button, patient information button, and sampling button.</li>
<li>Auto/Manual/Rhythm work modes Interface prompts tachycardia and bradycardia Lead-off detection and alarm</li>
<li>Easy-to-use 1-2-3 touchscreen operation is fast and intuitive. Built-in rechargeable Li-ion battery, continuous Operating ≥5h ; AC/DC power supply</li>
<li>Report formats: PDF PNG JPG XML and ZQECG data export Workstation supports real-time sampling and analysis . It also can be upload and download reports</li>
</ol>

TenTabs Zoncare E10 3 Channel Digital ECG Machine With Touchscreen Design

Multi-parameter Patient Monitor YSPM80C
ECG / RESP / SpO2 / PR/ NIBP / TEM
Professional Medical Equipment Supplier, Hospital Equipment For Sale, Hospital Equipment Supplier &#8211; YSENMED
Search Our Catalog
Français
Español
USD
EUR
GBP
CAD
AUD
CHF
HKD
JPY
RUB
BRL
CLP
NOK
DKK
SEK
KRW
ILS
MXN
CNY
SAR
SGD
NZD
ARS
INR
COP
AED
Home
Products
Solutions
News
Download
Reviews &amp; References
About Us
Contact Us
English
&nbsp;
Patient Monitors
Home &gt; Operating Room Equipment &gt; Patient Monitors&gt; Multi-parameter Patient Monitor YSPM80C
&nbsp;
PrevNext
Multi-parameter Patient Monitor YSPM80C
Model: YSPM80C
Multi-parameter patient monitor, 12.1 inch color TFT LCD display
Model
YSPM80C
Brand
YSENMED
Price
Get Price
MOQ
1
Ship From
From Guangzhou, China
Shipping
Any shipping terms convenient for customers
&nbsp;
1
&nbsp;
Get Price
Categories：Patient Monitors
Share：
Description Get Price Review
&nbsp;
&nbsp;
Description
&nbsp;
NIBP
&nbsp;
Method: Oscillometry
&nbsp;
Measure mode: Manual, Auto, STAT
&nbsp;
Measure interval in auto mode:
&nbsp;
1~5/10/15/30/60/90/120/180/240/480min
&nbsp;
Measure period in STAT mode: 5min
&nbsp;
Pulse rate range: 40 ~ 240bpm
&nbsp;
Measure &amp; alarm range: Adult
&nbsp;
SYS 40 ~ 280mmHg
&nbsp;
DIA 10 ~ 220mmHg
&nbsp;
MEAN 20 ~ 240mmHg
&nbsp;
Pediatric
&nbsp;
SYS 40 ~ 220mmHg
&nbsp;
DIA 10 ~ 160mmHg
&nbsp;
MEAN 20 ~ 170mmHg
&nbsp;
Neonatal
&nbsp;
SYS 40 ~ 135mmHg
&nbsp;
DIA 10 ~ 100mmHg
&nbsp;
MEAN 20 ~ 110mmHg
&nbsp;
Static pressure measurement
&nbsp;
Range: 0 ~ 300mmHg
&nbsp;
Accuracy: ± 3mmHg
&nbsp;
Resolution: 1mmHg Accuracy:
&nbsp;
Max. Mean Error: ± 5mmHg
&nbsp;
Max. Standard Deviation: 8mmHg
&nbsp;
Overpressure protection:
&nbsp;
Adult 300mmHg
&nbsp;
Pediatric 240mmHg
&nbsp;
Neonatal 150mmHg
&nbsp;
SPO2
&nbsp;
Measurement range: 0 ~ 100%
&nbsp;
Resolution: 1%
&nbsp;
Accuracy: 70% ~ 100% ± 2%
&nbsp;
40% ~ 69% ± 3%
&nbsp;
Environment
&nbsp;
Operating environment :
&nbsp;
Temperature: 0 ~ 40 ℃
&nbsp;
Humidity: 15% ~ 80%
&nbsp;
Pressure: 86.0 kPa ~ 106.0kPa
&nbsp;
Transport and Storage environment :
&nbsp;
Temperature: -20 ~ 55 ℃
&nbsp;
Humidity: 10% ~ 90%
&nbsp;
Pressure: 86.0 kPa ~ 106.0kPa

Multi-parameter Patient Monitor YSPM80C

YSAED-100 AED
Output: BiphasicTruncatedexponential
Energy Sequence(child): 50J,50J,50J
Energy Sequence(Adult): 150J,200J,200J
Charge Time: 6 sec.to 150J
8 sec. to 200 J(New battery)
Analysis Time: 6 sec.

YSAED-100 AED

YSOTDM7000 Defibrillator Monitor
Screen Type: 7 inch High-resolution display
Waveform: Biphasic
ECG: 3-lead ECG cable, or 5-lead ECG
cable, paddles.
Charge Time: Less than 7 seconds
Standard: Biphasic defibrillation/ECG/AED
Optional: Spo2/NIBP/CO2/Pacer/Touch
screen

YSOTDM7000 Defibrillator Monitor

YSOT-LED97 Single -Dome LED theatre light
 Light Source Type: LED
 Illuminance (lux): 160,000
 Service Life:Up to 60,000 hours
 Maintenance: Individual LED modules are
replaceable.
 Spot Size Adjustment Range: 180mm to
280mm (with constant central illuminance)
 Color Temperature Range: Adjustable in
10 steps from 4000K to 5000K
 Standard Color Temperature:4350K
 Color Rendering Index (Ra): ≥96

YSOT-LED97 Single -Dome LED theatre light

YSOTLED9793 Double-Dome LED Theatre Lamp
 Light Source Type: LED
 Illuminance (lux): 160,000
 Service Life:Up to 60,000 hours
 Maintenance: Individual LED modules are
replaceable.
 Spot Size Adjustment Range: 180mm to
280mm (with constant central illuminance)
 Color Temperature Range: Adjustable in
10 steps from 4000K to 5000K
 Standard Color Temperature:4350K
 Color Rendering Index (Ra): ≥96

YSOTLED9793 Double-Dome LED Theatre Lamp

YSOT-KJ4D 4- Function electric operation table
Table size 2010mm×500mm
Lifting table 1000mm×700mm
Trendelenburg/reverse Trendelenburg≥25°,
reverse≥20°
Tilt left/Tilt right: left≥20°, right≥20°
Leg plate adjustment range Downfold ≥90°
demountable abduction 180°
Back plate(up/down) up≥75° down≥10°
Head plate(up/down) up≥50°down≥
90°demountable

YSOT-KJ4D 4- Function electric operation table

Key Features 
<ul>
<li> Loading weight: 450kg</li>
<li> Material: durable aluminum alloy.</li>
<li>Handles: 4 Handles, or Non.</li>
<li>Wheels: 6&#8243; wheels with brakes</li>
</ul>

Church Trolley model YSTSC-CT01

Key Features 
<ul>
<li> The device is intended for use of lowering the casket into graves.</li>
<li>Telescopes from 62&#8243; X 25&#8243; to 94&#8243; X 38&#8243;</li>
<li>Gears are large, tested to bear loads in excess of normal demand</li>
<li>Unique Braking System provides a constant, steady lowering speed</li>
<li>Castings are non-corrosive aluminum with easy access to internal working parts</li>
</ul>

Coffin Lowering Device

YSOT-KJ5D 5-Function Electric Operation Table (Suitable for Carm)
Table size 2010mm×500mm
Lifting table 1000mm×700mm
Trendelenburg/reverse Trendelenburg≥25°,
reverse≥20°
Tilt left/Tilt right: left≥20°, right≥20°
Leg plate adjustment range Downfold ≥90°
demountable abduction 180°
Back plate(up/down) up≥75° down≥10°
Head plate(up/down) up≥50°down≥
90°demountable
Longitudinal movement Parallel moving≥
400mm

YSOT-KJ5D 5-Function Electric Operation Table (Suitable for Carm)

Key Features
<ul>
<li>Made of high quality stainless steel. 
★ The surface is finished with circular arc, 
without scaling, convenient for cleaning 
★ With 3 sieved table-top plates, detachable 
and autoclavable. 
★ The sink is equipped with a hair isolator 
to prevent from entering the drainage pipe</li>
</ul>

Autopsy Table

Key Features
Dressing Forceps, 180mm 1pc 
★ Tissue Forceps, 250mm 1pc 
★ Periosteal raspatory 160×11 1pc 
★ Bone rongeur 180×8,straight 1pc 
★ Rib Shears, 220mm 1pc 
★ MAYO Dissecting Scissors, 180 mm, 
straight 1pc 
★ WEITLANER Self Retaining Retractor, 
sharp, 170 mm, 3&#215;4 teeth 1pc 
★ Bone mallet,220/450g 1pc 
★ Osteotome, 300×25 1pc 
★ Bone saw, 320mm 1pc

Autopsy Instrument Kit

YSAV3010 Medical ICU Ventilator
12.1 inch touch screen with desirable color
schemes
Applied for adult, pediatric
Multi-mode ventilation function(VCV,
SIMV, SIMV/PSV, PSV, PCV, APRV,
APNEA, CPAP, BIPAP, Manual, SIGH

YSAV3010 Medical ICU Ventilator

YSAV6201A Medical Anesthesia Machine 
10.1&#8243; LCD screen
Gas source: O2, N2O
Vaporizer: 2pcs

YSAV6201A Medical Anesthesia Machine

YSXWJBX301B Video Microscope
Viewing head: 7&#8243; LCD
Nosepiece: Ball beating quadurple
nosepiece
Eyepiece: Wide field plane-scope eyepiece
WF10X18mm
Objective: Achromatic 4X, 40X, 40X(S), 100X(S,
Oil)
Plan achromatic 4X, 40X, 40X(S),

YSXWJBX301B Video Microscope

YSTE-PR303 HbA1c Analyzer
Detection method: Boronate affinity
chromatography
Test time 6 minutes / test
Sample whole blood

YSTE-PR303 HbA1c Analyzer

YSTEUA200B Urine Analyzer
Test parameters: LEU, NIT, URO, PRO,
PH, BLD, SG, VC, KET, BIL, GLU,
MALB, CRE, CAL
&nbsp;

YSTEUA200B Urine Analyzer

YSTE502D Dual-Channel Coagulation Analyzer
Test items: PT,APTT,TT,FIB
Test channel: 2 channels

YSTE502D Dual-Channel Coagulation Analyzer

YSTE-EA100 Portable Electrolyte Analyzer
5-in-1&#8243; cartridge: K+, Na+, Cl-, iCa²+ ,
iMg²+
.Maintenance free

YSTE-EA100 Portable Electrolyte Analyzer

YSTECLIA100P Auto Chemiluminescenc e Immunoassay Analyzer
12 minutes for the first result. Up to 120
tests/hour.
Higher efficiency with triple test cartridge.
Ready-to-use cartridge, no extra
consumables.

YSTECLIA100P Auto Chemiluminescenc e Immunoassay Analyzer

YSTE120S Auto Biochemistry analyzer 
Max. 120 t/h
Discrete/random access
STAT sample priority
No computer needed, with internal thermal
printer
27 positions for sample and 54 positions for
reagent
Liquid level detection and collision

YSTE120S Auto Biochemistry analyzer in

YSTE-BI50 POCT Dry Biochemistry &amp; Electrolyte Analyzer
Rapid Testing ：
Results in about 10 minutes, significantly
boosting diagnostic efficiency.
Minimal Sample Requirement ：
Only 100-120µL of sample is required,
ideal for blood collection challenges.

YSTE-BI50 POCT Dry Biochemistry & Electrolyte Analyzer

YSTE500A 5-Part Auto Hematology Analyzer
5-Part
60 tests/h
25 parameters + 2 histograms + 2
scattergrams

YSTE500A 5-Part Auto Hematology Analyzer

YSTE320A 3-Part Auto Hematology Analyzer
3-Part
60 tests/h
21 parameters + 3 histograms

YSTE320A 3-Part Auto Hematology Analyzer

YSB-M5 Portable Color Doppler Ultrasound System
Main unit (12&#8243; high resolution screen)
Any two probes from convex, linear
and transvaginal probes

YSB-M5 Portable Color Doppler Ultrasound System

YSB-M30 4D Portable Color Doppler Ultrasound System
Main unit (15.6&#8243; high resolution
screen)
Any two probes from convex, linear
and transvaginal probes

YSB-M30 4D Portable Color Doppler Ultrasound System

YSB-S7 4D Trolley Color Doppler Ultrasound System
Main unit (19&#8243; minitor+10.4&#8243; touch
screen)
Any two probes from convex, linear
and transvaginal probes

YSB-S7 4D Trolley Color Doppler Ultrasound System

YSB-ViV20 4D Trolley Color Doppler Ultrasound System
Main unit (21.5&#8243; minitor+13.3&#8243; touch
screen)
Any two probes from convex, linear
and transvaginal probes

YSB-ViV20 4D Trolley Color Doppler Ultrasound System

Digital Mammography System
Mammography x-ray machine
Mammo flat panel detector
Workstation

Digital Mammography System

5kW Digital FPD C-arm System
YSX-C605 is a compact and multifunctional digital surgical system, which can provide radiation guidance for patient diagnosis intervention and surgery, it can be used in limited space to optimize workflow more eficiency.
Model YSX-C605
Brand YSENMED

5kW Digital FPD C-arm System

Handheld X-ray System
X-ray unit (Built-in computer)
Wired flat panel detector
Mobile stand x 2

Handheld X-ray System

210W Handheld X-ray System
210W x-ray unit
Wired flat panel detector
Laptop Computer
Mobile stand x 2

210W Handheld X-ray System

5.6kW Portable &amp; Mobile X-ray Machine
5.6kW x-ray unit (10.4&#8243; touch screen)
Wired flat panel detector
Laptop computer
Mobile stand

5.6kW Portable & Mobile X-ray Machine

20kW Digital Mobile X-ray System
20kW
With built-in computer
With wired flat panel detector

20kW Digital Mobile X-ray System

32kW Digital Mobile X-ray System
32kW
With built-in computer
With wired flat panel detector

32kW Digital Mobile X-ray System

32kW Medical High Frequency X-ray Machine
32kw / 400mA
with bucky stand

32kW Medical High Frequency X-ray Machine

50kW Digital Xray System with Flat Panel Detector
50KW Generator
Flat pannel detector
4-way floating table
Software
Computer workstation

50kW Digital Xray System with Flat Panel Detector

Wireless flat panel detector 
<ul>
<li>Sensor a-Si</li>
<li>Limited Resolution 3.5 lp/mm</li>
<li>A/D Conversion 16 bit</li>
<li>Data Interface GigE</li>
<li>Power consumption 13 W</li>
<li>Active Area 430&#215;430 mm</li>
<li>Pixel Size 139 μm</li>
<li>With one battery</li>
</ul>

Wireless flat panel detector

Wired Flat panel detector
<ul>
<li>Image Output Time 1S</li>
<li>Sensor a-Si</li>
<li>Limited Resolution 3.6 lp/mm</li>
<li>A/D Conversion 16 bit</li>
<li>Data Interface GigE</li>
<li>Power consumption 12 W</li>
<li>Active Area 430&#215;430 mm</li>
<li>Pixel Size 139 μm</li>
</ul>

Wired Flat panel detector

<h5>SONIX IMAGE UPP-110S</h5>
<h5></h5>
<h5></h5>
<h5></h5>
<h5>PRODUCT SPECIFICATIONS:</h5>
UPP-110S ultrasound thermal print media can be used for Sony and Mitsubishi video printers to deliver high-definition medical images for radiology and OB-GYN services and practices.
Overall Dimensions:
<ul class="fusion-checklist fusion-checklist-1 fusion-checklist-default type-icons">
<li class="fusion-li-item">
<div class="fusion-li-item-content">Paper size: 110mm (W) x 20m (L)</div>
</li>
</ul>
<ul class="fusion-checklist fusion-checklist-2 fusion-checklist-default type-icons">
<li class="fusion-li-item">
<div class="fusion-li-item-content">Paper type: Direct thermal</div>
</li>
</ul>
<ul class="fusion-checklist fusion-checklist-3 fusion-checklist-default type-icons">
<li class="fusion-li-item">
<div class="fusion-li-item-content">Packing: 10 rolls/box</div>
</li>
</ul>
<table width="421">
<tbody>
<tr>
<td width="79">Width</td>
<td width="135">110mm</td>
</tr>
<tr>
<td width="79">Length</td>
<td width="135">20m</td>
</tr>
<tr>
<td width="79">Diameter</td>
<td width="135">47mm</td>
</tr>
<tr>
<td width="79">Core</td>
<td width="135">13mm cardboard</td>
</tr>
<tr>
<td width="79">Grammage</td>
<td width="135">80gsm</td>
</tr>
<tr>
<td width="79">Thickness</td>
<td width="135">80um</td>
</tr>
<tr>
<td width="79">Packing</td>
<td width="135">10 rolls/box</td>
</tr>
<tr>
<td width="79">MOQ</td>
<td width="135">500 rolls</td>
</tr>
</tbody>
</table>
&nbsp;
<ul>
<li>Size: 110mm (wide) x 20m (length). 10 rolls per box, 10 boxes per master carton.</li>
<li>Our UPP-110S thermal print media is made from 100% Japanese thermal synthetic paper. It is designed with high gloss and printability and also shows good durability and resolution.</li>
<li>Our 110S print media is water and liquid resistant, light and heat resistant, fingerprint resistant, and has an anti-electrostatic layer.</li>
<li>Our 110S print media has a good image durability for up to 10 years under proper storage. It is compatible with Sony and Mitsubishi ultrasound printers.</li>
<li>As a direct thermal paper manufacturer, we can supply high-quality 110S print media at 50-60% of the cost of original Sony print media.</li>
<li>Storage conditions: Store the paper in a cool, dry, and dark environment. The temperature should be below 30° and the humidity is under 60%. Avoid direct sunlight and heat.</li>
</ul>

SONIX IMAGE UPP-110S

<h5>Ultrasound Paper Rolls UPP-110HD</h5>
<h5></h5>
<h5></h5>
<h5></h5>
<h5>PRODUCT SPECIFICATIONS:</h5>
Ultrasound thermal paper roll 
1. Original place:Japan
2. Use in medical video Printers
3. Top quality
4. Size: 110mm*18m
5. OEM is acceptable
Thermal Video Printer Paper
Original place: Japanese origin.
1. Glossy Type Paper(Type V).
2. Each roll is packed in individual pack
3. High resolution and preservation of printed video image
4. 110S,110HG,110HD
5. Package: 10 rolls/box,  10boxs/cartons

Ultrasound Paper Rolls UPP-110HD

<h5>UPP-110HG</h5>
<h5></h5>
<h5></h5>
<h5></h5>
<h5>PRODUCT DESCRIPTION:</h5>
<table width="421">
<tbody>
<tr>
<td width="79">Width</td>
<td width="135">110mm</td>
</tr>
<tr>
<td width="79">Length</td>
<td width="135">18m</td>
</tr>
<tr>
<td width="79">Diameter</td>
<td width="135">45mm</td>
</tr>
<tr>
<td width="79">Core</td>
<td width="135">13mm</td>
</tr>
<tr>
<td width="79">Grammage</td>
<td width="135">80gsm</td>
</tr>
<tr>
<td width="79">Thickness</td>
<td width="135">80um</td>
</tr>
<tr>
<td width="79">Packing</td>
<td width="135">10 rolls/box</td>
</tr>
<tr>
<td width="79">MOQ</td>
<td width="135">500 rolls</td>
</tr>
</tbody>
</table>
Sony Compatible UPP-110HG Ultrasound Thermal Paper Specification:
<ul>
<li>Size: 110mm (wide) x 18m (long). 10 rolls per box, 10 boxes per master carton.</li>
<li>The paper is designed for perfect matching with Sony and Mitsubishi video printers. It can produce high-resolution ultrasound scan images to help doctors make precise medical diagnoses.</li>
<li>Made from 100% Japanese thermal synthetic paper material. High water resistance and high-gloss paper like a mirror.</li>
<li>UPP-110HG paper is designed to be durable and long-lasting, with high resistance to fading, water, and humidity, ensuring that printed images remain legible and reliable over time.</li>
<li>Each paper roll is packed with a foil pouch to protect it from sunshine, water, dust, and humidity.</li>
<li>Custom brand packing is accepted for us. We can do custom brand inner and outer packaging for your order.</li>
<li>Storage conditions: store the paper in a dark place where the temperature is below 30° and the humidity is under 60%. Do not rub the printed surface hard.</li>
</ul>

UPP-110HG

<h5>SONIX IMAGE UPP-110HD</h5>
<h5></h5>
<h5></h5>
<h5></h5>
<h5></h5>
<h5>PRODUCT DESCRIPTION:</h5>
Our UPP-110HD high-density thermal paper is compatible with Sony video printers, producing clear and vivid black-and-white prints. This makes it ideal for various diagnostic and medical imaging applications.
Overall Dimensions:
<ul class="fusion-checklist fusion-checklist-1 fusion-checklist-default type-icons">
<li class="fusion-li-item">
<div class="fusion-li-item-content">Paper size: 110mm (W) x 20m (L)</div>
</li>
</ul>
<ul class="fusion-checklist fusion-checklist-2 fusion-checklist-default type-icons">
<li class="fusion-li-item">
<div class="fusion-li-item-content">Paper type: Direct thermal</div>
</li>
</ul>
<ul class="fusion-checklist fusion-checklist-3 fusion-checklist-default type-icons">
<li class="fusion-li-item">
<div class="fusion-li-item-content">Packing: 10 rolls/box</div>
</li>
</ul>

SONIX IMAGE UPP-110HD

Description
Specifications :900*450*1900mm (size can be customized)
1. Material Description: The main body is made of 1.2mm304 stainless steel. A total of four 
laminates, each with two PP specimen boxes or stainless steel trays. 
2. Fan air duct has strong anti-corrosion and anti-aging performance, which can effectively 
discharge harmful gases, and the low-noise centrifugal fan has strong exhaust air exhaust pipe to 
discharge outside. 
3. Equipped with stainless steel tray or plastic box, easy to clean (304 stainless steel structure, 
unique top-down through-type rear mezzanine collection and exhaust mode, with UV ozone 
disinfection and sterilization device. 
4. Product structure characteristics &#8211; a biosafety Type specimen storage cabinet, which can 
effectively avoid the leakage of toxic and harmful gases or odorous gases and dangerous 
substances generated by biological specimens or other harmful specimens in the specimen cabinet, 
so as to avoid the threat to the health of indoor personnel and maintain the safety of indoor 
environment. Stable, a series of disinfection and sterilization of the dangerous gas discharged from 
the specimen cabinet, and filtration treatment, so that it can be safely discharged to the outside, 
which is characterized in that the gas in the specimen cabinet is pumped through the fan to make 
the specimen cabinet at A certain negative pressure state ensures that the gas in the cabinet is not 
leaked. 
5. At the same time, the ozone disinfection and sterilization technology is used to disinfect and sterilize the gas in the specimen cabinet and the ventilation duct to kill harmful organisms and 
ensure the safety of the external exhaust body.
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 930*470*1950 mm, 
Gross Weight:60kg

HS-BC01：Vented Stainless Steel Specimen Cabinet

Description
The base is made of Baosteel SPCC, the base is 1.2 cold-rolled steel plate, the box is 
0.8 cold-rolled steel plate, the drawer is 0.8 cold-rolled steel plate, each group has 4 
sections, and one base is added, and each group can store 96 air-drying sheets. 
Surface treatment: degreasing, surface regulator, zinc phosphating, passivation, 
powder coating. Dedicated slots and marking slots are integrally press-molded. 
1.Dimensions: 450*315*1295m 
2.Capacity: each of the 4 pieces cabinet holds 24 pcs Slide tray with a total capacity of 
96 slide trays per set. 
Net weight:28kg
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 510*750*900mm 
Gross Weight:32 kg

Pathology Slide Tray cabinet No.: HS-DC03

Description
1. Specifications: 450*478*1295mm 
2. The base is made of Baosteel SPCC1.2 cold-rolled steel plate, 0.8 cold-rolled steel plate, 0.8 
cold-rolled steel plate, each set of 3 sections, plus one base, six large draws per section, and digital 
labels for easy archiving. 
3.Capacity: each of the 3 pieces cabinet holds approximately 3000 pcs slides with a total capacity of 
9000pcs slides per set. (if put 1 slide in each Card slots, the total capacity of each set are 4500pcs ). 
3. Surface treatment: degreasing and degreasing, surface conditioning, zinc phosphating, 
passivation, powder coating. Handle: ABS dark handle. 
4. The special slot and the standard slot are integrated and stamped. 
5. Net weight:65.5kg
Package Info: 
Each instrument packed Wooden Case 
Dimensions:1204*490*1210mm, 
Gross Weight:69kg

Pathology Drying Slide Storage Cabinet No.: HS-DC02

Description
1. Four pieces and a base combine one set of slide storage cabinet 
2. Outer dimension：515*480*1510 mm 
3. Capacity: each of the 4 pieces cabinet holds approximately 3150 pcs slides with a total capacity 
of 12600pcs slides per set. (if put 1 slide in each Card slots, the total capacity of each set are 
6300pcs ). 
4. It has the same dimension with our pathology slide storage cabinet, pathology paraffin wax storage cabinet. So they could be stacked up，saving much space and looked elegant. 
5. Material：cold-rolled steel sheet with 0.8 mm thickness. 
6. Surface treatment：automatic electrostatic powder coating. 
7. Inner structure：each piece has 5 drawers，each drawer is divided into 5 grooves，each groove 
is designed very exquisite. And the slices can be hold up-right. Thus, they will be dried easily in a 
ventilated environment. 
8. The drawer could be pulled out smoothly and steadily, it has automatic homing feature, which 
could prevent the drawers from falling down accidentally. 
9. There’s a card slot location for each drawer, so the contents of each drawer could be easily 
identified. 
10. With high elastic shock absorption mat, reduce collisions with cabinet put oneself in another&#8217;s 
position to close the drawer, reduce the noise to the minimum. 
11. On the top of each cabinet has securing snaps. So they could stack up one by one, saving 
space and more steadier. 
12. Net weight:65.5kg 
13.dimensions of Cabinet:480*515*1510mm
Package Info: 
Each instrument packed Wooden Case, 
Dimensions:1000*540*950mm 
Gross Weight:106 kg

Pathology Drying Slide Storage Cabinet No.: HS-DC01

Description
1. Specifications (mm); 450*478*1295mm 
2. Cabinet made using high quality cold-rolled steel plate 1.0m. 
3. Capacity: each of the 3 pieces cabinet holds approximately 3666pcs wax block with a total 
capacity of 11,000 pcs wax block per set. 
4. Handle: Plastic dark handle. 
5. Surface: degreasing, surface conditioning, zinc phosphating, passivation, powder spraying. 
6. Slot: special slot for metal mold opening. 
7. Standard groove: integrated stamping forming. 
8. The overall structure of the combined type, each can store about 11000 pieces of standard wax 
9. Use the standard embedding box drawer storage design. 
10. Net weight:68.6kg
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 1204*490*1210mm, 
Gross Weight:77 kg

Pathology Paraffin Block Storage Cabinet No.: HS-CC02

Description
1. Four pieces and a base combine one set of paraffin block storage cabinet 
2. Outer dimension：515*480*1510 mm 
3. Capacity: each of the 4 pieces cabinet holds approximately 4000pcs wax block with a total 
capacity of 16,000 pcs wax block per set. 
4. It has the same dimension with our pathology drying slide storage cabinet, pathology slide 
storage cabinet. So they could be stacked up，saving much space and looked elegant. 
5. Material：cold-roll steel sheet with 0.8 mm thickness. 
6. Surface treatment：automatic electrostatic powder coating. 
7. Inner structure： 
each piece has 5 drawers， 
each drawer has 12 grooves in it， 
and the groove width 
is adjustable. 
8. The drawer could be pulled out smoothly and steadily, it has automatic homing feature, which 
could prevent the drawers from falling down accidentally. 
9. There’s a card slot location for each drawer, so the contents of each drawer could be easily 
identified. 
10. With high elastic shock absorption mat, reduce collisions with cabinet put oneself in another&#8217;s 
position to close the drawer, reduce the noise to the minimum. 
11. On the top of each cabinet has securing snaps. So they could stack up one by one, saving 
space and more steadier. 
12. Net weight:102kg
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 1000*540*950mm, 
Gross Weight:106 kg

Pathology Paraffin Block Storage Cabinet Item HS-CC01

Description
1. Specification (mm): 403*478*1625mm 
2. Capacity: 12 layers form a set, each layer holds approximately 5000 pcs slides with a total 
capacity of 60000 pcs slides per set, plus a base. 
Handle with ABS chrome drawer slide by ABS special separator for archiving. 
3. The surface of the cabinet: degreasing, surface conditioning, zinc phosphating, passivation, 
powder spraying. 
4. Slot: special slot for metal mold opening. 
5. Standard groove: integrated stamping forming. 
6. Net weight:88.5kg
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 1110*490*1210mm, 
Gross Weight:95 kg

Pathology Slide Storage Cabinet No.: HS-SC02

Description
1. Four pieces and a base combine one set of slide storage cabinet 
2. Outer dimension：515*480*1510 mm 
3. Capacity: each of the 4 pieces cabinet holds approximately 13,750 pcs slides with a total capacity 
of 55,000 pcs slides per set. 
4. It has the same dimension with our pathology drying slide storage cabinet, pathology paraffin wax storage cabinet. So they could be stacked up，saving much space and looked elegant. 
5. Material：cold-rolled steel sheet with 0.8 mm thickness. 
6. Surface treatment：automatic electrostatic powder coating. 
7. Inner structure：each piece has 9 drawers，each drawer is divided into small grooves，and the 
groove width is adjustable. 
8. The drawer could be pulled out smoothly and steadily, it has automatic homing feature, which 
could prevent the drawers from falling down accidentally. 
9. There’s a card slot location for each drawer, so the contents of each drawer could be easily 
identified. 
10. With high elastic shock absorption mat, reduce collisions with cabinet put oneself in another&#8217;s 
position to close the drawer, reduce the noise to the minimum. 
11. On the top of each cabinet has securing snaps. So they could stack up one by one, saving 
space and more steadier. 
12.Net weight:102kg
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 1000*540*950mm, 
Gross Weight:106 kg

Pathology Slide Storage Cabinet No.: HS-SC01

Description
Specifications: 1200 *700*1900m 
Net Weight:150kgs 
1. It is suitable for the reception and preservation of pathological biopsy tissues. It is designed to 
meet the relevant requirements of the “China Safety and Environmental Protection Regulations”. It 
is safe, non-toxic, beautiful and durable. 
2. The cabinet material is made of 1.0mm 304# stainless steel frosted board, which is 
surface-plasticized and has the characteristics of firmness, beauty and corrosion resistance. (The 
glass door is equipped with an electric heating film to prevent fogging water on the glass. The door 
body adopts a self-priming reset device, which is flexible to open and close tightly.) 
3. Using imported Sanling compressor refrigeration, the temperature inside the cabinet can be 
controlled at 0~10 °C. 
4. The use of power: 220V/50HZ, refrigerant R12/R134a, power 300~1000W. 
5. Anti-corrosion vacuum glass door, anti-condensation, explosion-proof effect, sealed around, can 
effectively prevent harmful gas spillage. 
6. Direct cooling type refrigeration, high heat exchange efficiency, good cooling effect, icing and 
frosting, condensed water can be concentrated discharge, working noise <20db.
7. Digital temperature display, the temperature inside the cabinet is clear at a glance.
8. φ8mm steel spray grid, with special stainless steel anti-corrosion specimen storage box, bearing
capacity, specimen storage is convenient. (The top and bottom of the cabinet are 5 layers, and the
height of each floor is adjusted at will)
9. The handle is concentrated in the middle, the electrical control button is located in the upper right
corner, and the switch is convenient.
When the specimen is accessed, a negative pressure airflow is automatically formed in the cabinet
to maintain the indoor environment.
10.There are 4 sets of universal casters on the bottom of the cabinet, which is convenient for
moving

Package Info: 
Each instrument packed Wooden Case 
Outer Case Dimensions: 1270*760*2000mm, 
Gross Weight:160 kg

HS-801B Direct Cooling Specimen Refrigerator

Description 
Specifications: 1200*700*1880mm, Net Weight:150kgs
1. Double display operating parameters (digital display) housing is 304 stainless steel 
2. The application of the external door anti-condensation technology, 85% humidity without 
condensation, to ensure the observation of the situation inside the box. 
3. Transparent vacuum tempered glass door. 
4. Medical 0-10 degrees refrigerator humanized design 
5. Automated frost function, suitable for high temperature and high humidity areas. No ice cream 
6. The safety door lock is designed to prevent random opening. 
7. Large screen digital temperature display for easy observation. 
8. Wide voltage band, suitable for 187~242V voltage. 
9 built-in lighting. Wide climatic zone: suitable for use in areas with an ambient temperature of 10 to 
38 ° C and a humidity of 80% or less. 
9.The product can be directly embedded in the closet or wall without occupying extra space. 
10. Adopting new fully enclosed high-grade compressor, balanced operation, low noise and long 
service life 
11. effective volume: 866L
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 1270*760*2000mm, 
Gross Weight:160 kg

HS-801A: Air-cooled Refrigerator

Description 
Specifications:2420*830*1810mm 
1. The corpse refrigerator is suitable for the mortuary funeral home laboratory and has the 
function of cold storage. 
2. Temperature control system 
3.3 sets of computer temperature control system to keep the temperature inside the box stable; 
4. Control system 
5. Keyboard lock and password protection function to prevent random adjustment of operating 
parameters; 
6. The alarm temperature range can be set freely; system failure alarm (high temperature alarm, 
low temperature alarm, sensor failure alarm, door opening alarm), failure point code display; 
7. Double alarm mode (sound buzzer alarm, light flashing alarm,) 
8. Use 3 high-efficiency brand compressors/SECOP compressors (optional) 
9. Adopt 3 groups of high-efficiency brand-made cooling fans; 
10. Adopt 3 sets of high-efficiency brand Chinese brand condensers 
11. Material: stainless steel 201/304 optional 
12. Compressor: domestic/imported SECOP optional 
1.Net Weight: 480KG
Main Technical Data: 
Temperature: -16°C to 5°C 
Number of compressor sets: 3 
Power supply: 220V/50HZ 
Dimensions of corpse tray: 1950*610mm 
Inner opening size: 1950*630*440mm 
Material: stainless steel 201/304 optional 
Compressor: domestic/imported SECOP optional 
Refrigeration method: single door single control cooling
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 2440*890*1860(mm), 
Gross Weight:480 kg

THP-773 Morgue Refrigerator（3 Cadaver）

Description
Specifications: 2600*800*850mm 
Features: 
Autopsy table was specially designed according to Ministry of Public Security Criminal Science and 
Technology Demonstration dissection room. It has dual function of convulsions &#038; anatomical. It 
is made of stainless steel compression molding and the overall shape is luxurious , precision 
production , acid and alkali resistant
General Feature 
1. Mesa arc-shaped inner connection, no scaling, easy to clean 
2. Double mesa structure, three sideboard table with a hole, movable loading and unloading 
3. Anatomy operating table have the scale, easy to measure 
4. Pool infrared sensor faucet with high manual faucet, hot and cold water temperature can be 
adjusted 
5. There are mobile sprinklers which water pressure can be adjusted. Table water curtain device 
can automatically wash the bodies of dirt 
6. Mill pond below can be crushed after the broken tissue dissection, small bones, through the 
discharge outlet 
7. Exhaust system features a medial inclination of 35 degrees on both sides of the mesa mouth 
downward ventilation negative pressure ventilation mode (need to connect with the outside 
exhaust fan) 
8. The table has a removable disk which can be used for organ anatomical placement process 
9. Autopsy table has side waterproof power socket 
10. Autopsy tables is stable and reliable on lift with new electric elevator 
11. Circular base, a rotatable table plus or minus 35 degrees to facilitate the body to take pictures 
Net Weight: 120kg
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 2650*850*990mm, 
Gross Weight:136kg

THP-772 Autopsy Table

Description 
specification：1500*750*1900mm 
Material：adopt 304#1.0MM super stainless steel 
Main Technical Data: 
1. Powerful fume exhaust system: adopt high power, low noise high quality fan to eliminate the 
harmful fume fully 
2. drainage systems：using table surface washing and won’t let the blot leave on it; with spray, all 
the working surface can clean thoroughly 
3. lighting、UV system：using brand lighting system, convenient operation 
4. heating system：adopt super heater which can let it having hot water anytime. The flexible 
mental soft tap let it easy to clean each place of surface. 
5. crushing system：the good grinder help you clean all the dirt 
6. camera system seat：the universal revolving seat can connect the camera system 
7. pedal formalin supply control switch 
8. Net Weight: 160kg
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 1580*830*2050mm, Gross Weight:: 215kg

TH-701 Trimming Hood

Description
1. Specifications: 1800 (L) 800 (W) 2000 (H) mm ± 50mm. The whole is made of 316 stainless steel, 
and the table is made of 2.0mm thick 316 stainless steel. 
2. The suction negative pressure exhaust design is adopted after the table, not the exhaust mode 
under the lower table, not the transparent structure without backplane. The exhaust position is 20cm 
on the operating table. 
3. Magnetic adsorption tool rack can absorb metal equipment, material equipment and anatomical 
equipment on it for convenience, with built-in glove rack. 
4. Formalin electric filling assembly (Description: with foot switch control, motor made of corrosion 
resistant materials and formalin recovery system. 
5. Automatic balance air supplement system, forming air curtain through airflow control, to prevent 
the leakage of toxic gas. 
6. The lifting device of the whole machine: adjust the height of the lifting table, the lifting range is 
200mm, to meet the height needs of the staff, use the pressure synchronization system, the lifting 
device is a light aluminum synthetic material, no sound in the process. 
7. Use LED clean lighting, with illumination of 80 microwatts per square centimeter. 
Hidden-mounted ultraviolet lamp. The disinfection device mainly used to operate the table area will 
automatically turn the table over, while the lighting device will be automatically hidden. 
8. Faucet: double faucet design, use water when taking materials, adjust the wall, the other one is 
water for tank cleaning, high-neck stainless steel faucet. (Compulsory energy saving product certificate) 
9. Sink: located on the right side of the table, (300mm 300mm 250mm) ± 5mm, the bottom of the inner tank is designed without dead space circular arc, movable flushing faucet: pull type washing, 
used to clean the internal working space and dead space of the material table. 
10. Organization grinder: 370W, 2600 rpm, full sound insulation cover, all stainless steel grinding 
components. It is connected with the drainage hole at the bottom of the sink and is mainly used for 
the crushing discharge of pathological tissue. 
11. The table is equipped with movable screen plate is easy to clean, the material table: 400mm 
300mm 100mm, lower cabinet body: using three cabinet door arc design double plate, the operation 
platform from the ground height is 800mm-850mm. 
12. Internal air purification device: ozone + anion purification, 
13. The exhaust of the material platform is connected with the overall exhaust system, and the 
intelligent control system is connected for control to realize data interconnection. 
14. Display≥ 17 inches, resolution ≥1920 * 1080(Optional) 
15. Integrated control display supports independent control of typhoon volume, wind speed and 
wind pressure, and interacts with the adjustment and changes of wind volume, wind speed and wind 
pressure of the total ventilation system of the laboratory. Built-in storage chip, with fault display, 
sound and light alarm, intelligent wireless fault information report, mobile query and other functions. 
Equipped with LED light, USB main interface, connected printer and keyboard.
Configuration Listing 
1.One main machine 
2.One shredder 
3.Two faucets 
4.1 table with a ruler 
5.1 set of display device and professional support 
6.One ultraviolet lamp 
7.LED flat panel lighting lamp 1 
8.One knife suction device 
9.Waterproof power socket 2 
10. Storage table 1 
11. One glove box 
12. 1 set of automatic liquid and recovery system 
13. 1 set of lifting system
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 1890*810*1970 mm, 
Gross Weight:160 kg

TH-702 Trimming Hood

Description 
Specifications: 1800*800*1900mm 
1. Excellent top 316L medical grade antibacterial stainless steel plate, countertop thickness: 2mm, 
cabinet thickness 1.5mm, international leading processing technology, remove light pollution, 
making it difficult to obtain long-term eye fatigue; 
2. Well-formed one-time forming table, internal full arc design, easy to clean and disinfect; 
3. Negative pressure exhaust design, waist ventilation, advanced gas diversion system, timely 
elimination of harmful gases on the table; 
4. Comfort lighting and automatic disinfection components, with intelligent automatic flip and 
smart interconnection interlock function, in the acquisition, the disinfection device will be 
automatically hidden inside the workstation, in the non-working hours at night, the disinfection 
device will automatically flip on the table Sterilization and sterilization, at the same time, the 
comfort lighting device will be automatically hidden, effectively reducing the staff&#8217;s misoperation 
during work and reducing the work hazard; 
5. Both sides are equipped with automatic retractable tempered glass, if necessary, the protective glass will automatically open (no manual), to prevent the tissue liquid splashed out of the
workstation and the top of the sampling table, resulting in indoor biochemical pollution 
6. Imaging dedicated light source components; 
7. Magnetic adsorption tool holder; Haier Kitchen Po Instant Water Heater, 6L Pack, Instant Hot; 
8. The United States imported Annabium bone tissue grinder, 0.5 horsepower, 50HZ, all 304 
stainless steel liner, reliable performance, ensure smooth water; 
9. Workstation overall circuit protection components; 
10. All 304 stainless steel drawing workstation dedicated hot and cold faucet, permanent rust, 
durable; 
11. All-purpose small spray gun for 304 stainless steel sampling workstations with a retractable 
distance of 1 meter or more, permanent rust-free, durable; 
12. Automatic table flushing device, 304 stainless steel nozzle, internal anti-blocking device 
designed to continuously flush the tabletop for a long time, to ensure that the formalin solution 
is flushed into the sewer at the fastest speed; 
13. Laser engraving ruler placed on the table, stainless steel carbonization technology, permanent 
colorfast, length: 500mm 
14. Equipped with waterproof multi-function five-hole socket 
15. Intelligent fully automatic machine table lifting components (with 2 sets of adaptive memory 
function components) (Note: The height of the workstation platform can be adjusted 0-400mm 
to meet the different requirements of different workers for the height of the tabletop, reducing 
occupational injuries, and more humanity, with 2 sets of memory function, one key can be 
adjusted to the best position); 
16. Formalin electric filling assembly (Note: Supports foot switch control, motor is made of 
corrosion resistant material, long life, reliable performance) 
17. Smart Air Replenishing System (Explanation: Intelligent interconnection and intercommunication with the air exhaust system, air volume is 70% of the air volume, more 
effective guarantee of control of harmful gases in a limited space, without letting it outflow into 
the indoor air, causing secondary pollution 
18. touch screen control system (Note: 12-inch high-definition LCD touch screen, equipped with 
human-computer interaction system, integrated management system, automatic control of the 
exhaust, lighting, wind speed sensor, etc. When a fault occurs, it will automatically warn and 
issue an alarm command with reliable performance. 
19. Pathologically Drawn Special Chopping Block with XY Axis Laser Scale 
Net Weight: 150kg
Package Info: 
Each instrument packed Wooden Case 
Outer Case Dimensions: 1900*890*2170mm 
Gross Weight330 kg

TH-703 Intelligent Trimming Hood

Description 
Suitable for users who have higher temperature uniformity requirements. The basis of laboratory 
research units supporting equipment, recommended for intermediate and senior laboratory.
1. Precision LCD microcomputer intelligent PID control system, with temperature control, timing 
and over-temperature alarm, with RS485 computer interface. 
2. With standard international brands cooling fan maintenance &#8211; free, durability. Perfect 
combination of duct design to ensure temperature uniformity for the working chamber 
3. Mirror stainless steel inner, anti-acid, and anti-corrosion characteristics. 
4. double tempered glass observation window in the door. 
5. the spaces and quantity of shelves can be adjusted
Main Technical Data: 
1. Temp range: RT+5~250℃ 
2. Accuracy: ±1℃ 
3. Fluctuation: ±1% 
4. Voltage: 220v 
5. Power: 1.2kw 
6. Inner size（H*W*D): 420*450*350mm 
7. Overall dimension（H*W*D）: 630*740*550mm 
8. Net weight:48kg
Optional Product Accessories 
1. Portable printer 
2. Programmable multi-stage controller 
3. ALLSENSTM software 
4. individual temperature limit
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 750*820*630mm 
Gross Weight: 51kg

HS-9070 Electric Hot Air Drying Oven

Description
1.Capacity(L): 28L 
2.Internal Dimension(W*D*H) mm: 270*265*400mm 
3.External Dimension(W*D*H) mm: 470*490*1120 /505*520*1165mm 
4.Power Supply(V/HZ): 220V/50Hz 
5.Power(W): 300/300/370/400W 
6.Power Consumption (KWh/24h): 3.0/3.1/4.6/5.6KWh/24h 
7.Temperature Range:0~-25/ -15～-40/-25～-60/-40～-86℃ 
8.Ambient Temperature: 16-32℃ 
9.Shelves: 1pc 
10.Climate Type: N 
11.Controller: Microprocessor 
12.Display: LED Digital 
13.Cooling Method: Direct Cold 
14.Defrosting: Manual 
15.Refrigerant: Mixed 
16.Extenal Material: Galvanized Sheet Sprayed 
17.Inner Material: 304 Stainless Steel 
18.Alarm Method: Sound-Light 
19.1year for Freezer, 3 Years for Compressor 
20.Net Weight: 66KG
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 550*590*1270mm 
Gross Weight: 88kg

HS-028 Laboratory freezer

Description 
1.Viewing Head: Biological Microscope with Seidentopf Binocular Head, Interpupillary Distance 
Adjustment Range 48~75mm, 360°Rotation of Eyepiece Tube with Inclined at 30° 
2.Eyepiece: WF10X/18mm 
3.Nosepiece: Quadruple, Click-stop 
4.Objective: Achromatic Objective:4x,10x, 40x(s), 100x(s,oil) 
5.Stage: Double Layers Mechanical Stage,140mmX132mm/75mmX45mm 
6. Focusing: Coaxial Coarse and Fine Adjustment, Focusing Range 30mm,Focusing Interval 
0.002mm 
7.Condenser: Abbe NA=1.25 with liris Diaphragm and Filter 
8.Illumination:3W LED, Adjustable Brightness 
9.Standard Accessory: 
Blue Filter 
BGX1-20(1A) Fuse 
Dust Cover 
Immersion Oil 
Instruction Manual in English 
9. Optional Accessory: 
Trinocular Head 
Dark Field Condenser (Dry or Oil) 
5vDC Base Tray 
Eyepiece WF16X
Package Info: 
Each instrument packed carton 
Dimensions:320*270*430mm 
Gross Weight: 6kg

HS-027 Microscope

Description
1. Small size, great space saver for the lab 
2. Steel structure, centrifuge chamber made of stainless steel. 
3. AC frequency variable motor drives, stably and quietly during operation. 
4. Parameters can be revised during operation without stopping. 
5. Automatic calculates and displays RCF at the same time. 
6. Electronic lid lock 
7. TD4B cell smear centrifuge is widely used in immune blood laboratory, laboratory, research 
room, can carry out red blood cell serology and antigen experiment. Identification of antibodies 
and results of Coombs experiments.
Main Technical Data: 
1. Max RPM: 3000rpm/ 1200rpm(TD4B-2) 
2. Max RCF:890g / 225g(TD4B-2) 
3. Max Capacity:12 cards 
4. Timer:1min～99min 
5. Revolutions/min:±10r/min 
6. Voltage: AC 220±22V 50/60Hz 10A 
7. Power: 100W 
8. Noise Level: ≤ 60dB（A） 
9. Chamber Diameter: Φ280mm 
Net Weight: 15kg 
Dimensions: 385*320*270 (mm)
Package Info: 
Each instrument packed Wooden Case 
Gross Weight:20kg 
Dimensions: 460*390*330mm

TD4B Table Cytospin Centrifuge

Description
The PrimeHisto XE is a histological slide scanner. The PrimeHisto XE design is designed for 
observation of histological samples, particularly medical/pathological tissue samples. The 
PrimeHisto XE allows scanning of histological samples mounted on a 25*75mm (1 x 3 inch) slide. 
With easy manipulation/setting, PrimeHisto XE allows the histological samples to be digitized in a 
matter of seconds. 
Scanners are equipped with HistoView, which is just an editing package that combines with the 
product hardware driver to scan and adjust the effective quality parameters of the images in the 
Windows and Mac OS environment. PrimeHisto XE allows you to save scanned images in a variety 
of image formats, such as TIFF, BMP, and JPEG. 
As a next-generation histological scanner, PrimeHisto XE has the ability to be suitable for most 
histological slide samples and can scan the entire histological slide image in a scanning area of 
24.3&#215;36.5mm. PrimeHisto XE also has a high resolution of up to 10,000 DPI and is suitable for a 
variety of micro applications, including advanced biology research in universities and basic biology 
research in high schools. 
1. Fast and economical digitization of organizational samples 
2. HistoView can be easily installed in PC/MAC system, with simple operation interface and 
powerful functions. 
3. High dynamic range (3.8 OD), can easily identify each cell. 
4. Wide range of applications, from basic histological research to high school biology research. 
5. Equivalent to 75 times the resolution. 
6. The newly designed rotatable polarizer holder (optional) allows scanning thin sections of 
polished rock on a 1×2 inches glass slide in bright field and polarized light
Main Technical Data: 
1. General technical parameters resolution:10000&#215;10000 DPI 
2. Dynamic range:3.8OD 
3. Scan area:24.3*36.5mm 
4. Scanning medium:75*25mm section 
5. Photo formats: TIFF, JPEG 
6. Light: transmits LED white light 
7. Operating systems: Windows XP/Vista / 7/8/10, Mac OS X 10.5+ 
8. Dimensions :260 *155*70mm
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 415*290*135mm, 
Gross Weight: 2kg

HS-TRO-001 Pathological Slide Scanner

Description 
Equipment composition 
1. Pathological section scanner 
2. Embedded PC with advanced graphics capability.
Optical microscopy 
1. 3200*2200 1” global shutter camera, Frame rate≥75f/s 
2. 20x objective lens, NA=0.75
Hardware Configuration 
1. Scanner platform XY drivers support resolution of 5um, Z auto focus support 0. 25um 
resolution. 
2. Scanning image resolution:20x objective lens, resolution ≤0.25um / pixel. 
3. Scanning process automation, Simple sample loading. 
4. LED light source, with a service life of more than 20000 hours. 
One click for scan. SW can pause/stop the scan process, support sample add-in during scan 
process. 
5. samples container. With the optional loading system, the sample container can reach 120 / 
240. 
6. Embedded PC, with nVidia professional graphics card for AI, featured with PC I0s like 
keyboard, USB3.0etc 
7. Slide Capacities: 6pcs (60pcs,120pcs ,240pcs optional)
Software configuration 
1. Images format: JPEG or BMP 
2. It supports automatic recognition of smear contour and scanning at specified position. 
3. Continuous scanning mode. The scan can be finished within 180s for one sample. 
(15mm*15mm) 
4. 4.4 Support history image browsing and review. 
4.5 Support auto sample positioning of sample slide. 
4.6 The scanner can mark the specified area and take high- -definition screenshots. 
4.7 It supports the storage of image data through local or network, and can query and count the 
stored data. 
Net Weight: 35kg 
Dimensions: 698*464*345mm
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 800*550*550mm, 
Gross Weight: 75kg

HS-TRO-006 Digital Pathological Slide Scanner

Description 
1. High printing speed, 2.5-4 seconds per cassette; 
2. Non contact UV laser technology; 
3. 10 inches LED touch screen via built-in software, also support to connect external PC; 
4. Fully compatible with LIS/HIS system; 
5. Built in bar-code scanner, and support to connect external scanners; 
6. Two working modes: Single output and batch outputs; 
7. Compatible with various models of embedding cassettes on the markets. 
8.Recommended service life: 8 years
Main Technical Data: 
Printing technology：UV Laser marking 
Print speed：2.5-4 seconds/cassette 
Print resolution：2500 dpi 
Cassette type：Cassette with lid (one-piece or two pieces); 
Cassette without lid 
Loading hopper：6 
Max Capacity Per Loading hopper：100 cassettes without lid or with lid assembled 
Compatible system：Open to connect HIS/LIS systems 
Dimension LxWxH;486mmx313mmx497mm 
Weight：37kg 
Power requirement：100-240 V AC, 50/60 Hz, 300W 
Other configuration：1. 10 inches touch screen 
2. Excellent ability to export number, letters,1D &#038; 2D codes, graphics; 
3. Software driver; 
4. Port to adaptable to various HIS/LIS system connection; 
5. Stable drive system for more durable application.
Package Info: 
Each instrument packed in carton 
Dimensions: 710*425*620mm 
Gross Weight: 49.5kg

CP-UC06 Cassette Printer

Description 
1. Automatic batch printing function, transparent embedding box clip, easy to observe the number of 
embedding boxes, add at any time, such as abnormal, the system automatically alarm and suspend 
printing. 
2. Automatic collection function, can automatically and neatly distribute the printed embedded box 
into the 10*10 matrix, and has the color distinction function, the first embedded box of the same 
sample is yellow, and the other is white, easy to distinguish (the color of the embedded box is 
optional). 
3. With network networking function, it can connect to the hospital LIS database, and has manual 
and scanning input. 
4. Zero cost of printing supplies, no ribbon, ink and other printing media, laser printing transmitter 
long life. 
5. Ultra-high definition printing, clear printing handwriting, friction resistance, corrosion resistance, 
not easy to fall off, easy to long-term archiving. 
6. Large amount of information printing, in the standard 45 degrees Angle embedding box incline, 
you can print patient name, digital code, characters, hospital name, date, two-dimensional code 
information, etc. 
7. Ultra-high speed printing, you can print on the machine without preheating. 
8. Large loading capacity,300 embedded boxes can be loaded at a time. 
9. Recommended service life: 8 years
Main Technical Data: 
Laser power： 20W 
Laser wavelength： 1060mm 
Marking range： 200*200mm 
Marking depth： ≤3mm (depending on material) 
Minimum line width： ≥0.01mm 
Minimum character： ≥0.15mm 
Repeat accuracy： ±0.01mm 
Average power consumption： ≤300W 
Output beam quality： M2＜1.8 
Laser Q-switched frequency： 20kHz~200kHz 
Marking speed： 0-30000 mm/s 
Control interface： standard USB 
Fiber laser life： >100,000 hours 
Power consumption： <500W
Cooling method： Air cooling
The beam quality resolution： 1 micron, which is more than 10 times that of traditional products
Power supply： AC220V, 50HZ / 5A
Working environment temperature: 10-40℃, humidity: 10%-90% no condensation
Linear speed： ≤300 m/min; (Galvanometer speed: 30000mm/s)
Laser marking machine configuration
1. 1 mainframe
2. 1 data cable
3. 6 embedding cassette loading slots
4. 6 embedding strips (50 embedding boxes per strip)
5. 1 power cord
6. 1 user manual
Net Weight:40kg
Dimensions: :400*435*420mm

Package Info: 
Each instrument packed in carton 
Dimensions: 630*575*600mm, 
Gross Weight: 45kg

CP-C06 Cassette Printer

Description 
1. Laser printing without special printing supplies. 
2. The printing speed is not less than 25 embedded boxes per minute (including QR code). 
3. Can print all kinds of text, numbers, QR code, symbols. 
4. The embedded box to be printed is placed horizontally and has a safety gap with the four sides of 
the slot. 
5. Single slot design. 
6. Each tank is loaded with not less than 100 embedded boxes at one time 
7. High printing clarity, to ensure that the printed two-dimensional code can be scanned reliably. 
8. Long-term pre-filled packaging box strip, save the user manual loading trouble, to ensure the print quality. 
9. Semi-transparent viewing window that can be opened and closed for easy observation of the 
printing process. 
10. The translucent viewing window is located directly in front of the marking machine. 
11. The embedded box can be added at any time for special printing through the translucent 
window. 
12. In addition to the two-dimensional code, more than 8 fields of numeric and character information 
can be printed. 
13. It can be connected to HIS or LIS systems in hospitals. 
14. The loading slot is located on the left side of the marking machine. 
15. The exit of the printed buried box is located on the right side of the marking machine. 
16. High printing clarity, to ensure that the printed two-dimensional code can be scanned reliably. 
17. Long-term pre-filled packaging box strip, save the user manual loading trouble, to ensure the 
print quality. 
18. The embedded box upload is located on the left side of the machine, and the printed embedded 
box output is located on the right side of the machine. 
19. Printing software can realize batch printing and individual printing. 
20. Print software can customize the print field name. 
21. The number of editable print fields contained in the printing software is not less than 8. 
22. The writing printed on the buried box should be scratch-resistant. Resistant to organic solvents. 
23. The size of the printed QR code is not less than 6x6mm. 
24. The printing software should contain a print editing window, a window to be printed and a printed 
window. 
25. The front width of the machine is less than 200mm. 
26. The list to be printed has automatic data recovery function without loss of data. 
27. You can export the printed information to a file for statistical analysis. 
28. Using slide type embedded box conveying and printing structure, the embedded box slips freely 
on the slide. 
29. The embedding box is printed in the middle of the slide. 
30. The printed embedded box slides freely to the bottom of the slide. 
31. The printing position of the embedded box is controlled by the electric jacking rod in the middle 
of the slide. 
32.Recommended service life: 8 years
Laser marking machine configuration 
1. 1 mainframe 
2. 1 data cable 
3. Buried strip seat 2 
4. 2 embedding strips (50 embedding boxes per strip) 
5. 1 power cord, 
6. 1 user manual 
Net Weight:19.8kg 
Dimensions: 440*420*250mm
Package Info: 
Each instrument packed in carton. 
Dimensions: 545*345*515mm, 
Gross Weight: 24.3kgkg

CP-C01 Cassette Printer

Description 
1. Using laser direct marking technology, laser directly burn out the characters. 
2. Printing supplies such as ribbon and ink cartridges are not required. 
3. It can print all kinds of paint slides, and there is no strict requirement for the smoothness of the 
glass paint surface. 
4. High printing precision, printed two-dimensional code can be easily scanned. 
5. Can realize the printing information export and batch printing function, can also realize the 
independent manual input information printing function. 
6. No less than 100 slides can be loaded at one time. 
7. The mechanical push hand will push the printed slide directly to the slide collection station to 
avoid free sliding or falling of the printed slide. 
8. Fixed slide collection station without movable slide collection trough. 
9. The slide collection station can collect and print at least 40 slides at a time. 
10.The printed slide is pushed out horizontally, and the print is located on the right side of the 
marking machine. 
11. The printed slide collection adopts a stack structure, with the first printed slide at the top of the 
stack. 
12. The width of the whole machine is not more than 21cm, which can be placed on the slicing 
workbench. 
13. Printing speed ≤6 seconds/slide, that is, no less than 10 slides can be continuously printed per 
minute. 
14. Built-in air filtration system, effectively filter printing dust. 
15. Adopt the windows system. 
16. Built-in color touch screen. 
17. Slide loading rack adopts pluggable design to facilitate slide loading 
18. The slide uploading slot is located on the right side of the slide marking machine for easy 
loading of slides 
19. With USB interface, easy to import and export data. 
20. Integrated two-dimensional code scanner. 
21.The printing parameters of each marking machine are built in the U disk, and you can replace 
the computer without calibrating the printing parameters. 
22. Use RJ45 interface. 
23. The printing software has a variety of automatic selection of printing templates, which can 
automatically select printing templates according to different organizations. 
24. Optional independent slide collector. The collector can be freely combined and separated from 
the marking unit. 
25. The glass collection station plus the collector can collect not less than 200 slides at one time. 
26.The marking range is 50m X 50mm, the resolution is 2500DPI, 
27.the ultraviolet life span is about 3 years, and the ultraviolet power is 1 watt 
28.Recommended service life: 8 years
Laser Slide Printer Configuration list: 
1, a host 
2, a power cord 
3, a USB data cable 
4. Built-in QR code scanner 
5, glass 2 boxes (50 pieces/box) 
6, slide upload rack 2 
7. A user manual 
Net Weight: 21.2kg 
Dimensions: 490*200*375mm
Package Info: 
Each instrument packed in carton 
Gross Weight: 28.2kg 
Dimensions: 630*575*600mm

SP-S01 Laser Slide Printer

Description 
Covering machine is a fast curing device for sealed glass slides. This machine adopts 
advanced microcomputer technology, which makes the equipment more accurate, stable and 
anti-interference ability. Suitable for medical colleges, hospital pathology, medical research units, 
animals and plants and food inspection departments. 
Usage: 
1. The glass slide containing the organization is neatly discharged into the concave frame of 
the workpiece table, and the numbered part is hung on the side of the work table; 
2. Take out the glue bottle and spin off the cone cover, cut a small section at the top of the 
cone, and drill a large and small suitable hole at the top; 
3. In turn, drop a small drop of glue on the slide tissue and cover the cover glass slide, and 
gently press the cover glass with your finger to spread the glue evenly; 
4. Turn on the machine power switch, use the left hand to send the glass slide with the cover 
glass from the left hole of the machine (can be single, or can be sent side by side), after 14 
seconds, the glass will be automatically sent out from the right side, the glue is dry 
Notes: 
1. 220 V power outlets must have secure ground wires; 
2. Disconnect the power when the 2. is not working; 
3. The glue box is specially made and can not be replaced by other containers; 
4.Pay attention to finishing the slide in time to prevent clogging the exit.
Main Technical Data: 
1. Rated voltage: AV220V±10% 
2. Power frequency: 50±1 HZ 
3. Rated power : ≤100W 
4. Speed:30 tablets/min 
5. Slide seat:15 
Net Weight:17.5kg 
Dimensions: 500*300*120mm
Package Info: 
Each instrument packed Wooden Case 
Gross Weight: 20kg 
Dimensions: 577*387*237mm

CS-FI Mini Cover Slipper

Description
1. Covers of various brands and specifications 
2. Color touch screen control interface, real-time dynamic prompts of operation instructions, 
simple and efficient operation, prevent misoperation. 
3. Compatible with basket type, non-basket type and other types of dyeing racks, automatic 
identification, no manual conversion 
4. By adjusting the flow and speed of the sealing rubber, it can be compatible with imported and 
domestically produced multi-standard sealing glue, stepless adjustment and real-time 
response. 
5. Whether the dispensing needle is in real-time detection and alarm function at the working 
position, and a cleaning screen is designed at the storage position to effectively prevent the 
nozzle from drying (manual operation is required) 
6. Automatically monitor the quality of the cover slipper during the working process. The 
fragments and bad pieces are automatically discarded into the waste cassette. The sensor has 
self-checking function to effectively improve work efficiency. 
7. Automatically carry out two rounds of slide scans during the work process, effectively reducing 
the leakage rate of the slides and improving the quality of work. 
8. Slide grab has automatic adjustment positioning function, automatically reset after 3 failed 
capture and graphic and audible alarm 
9. The slide out box has the function of putting it at any time and taking it at any time, and the machine automatically performs the operation; the machine without the exit box automatically 
detects and has the graphic sound alarm function. 
10. The process of storing slides has the function of blocking automatic detection and resetting 
alarms. 
11. Provides two modes of dry sealing and wet sealing. Users can switch between the conventional 
parameters as needed. 
12. The alarm mode adopts various modes such as graphic display and sound, and the sound 
alarm automatically stops after 5 times. 
13. Using large suction ultra-quiet exhaust fan, built-in replaceable activated carbon filter to 
enhance heat dissipation and effectively prevent air pollution
Main Technical Data: 
1. Specimen slide throughput: 200~400pieces/hour 
2. Specimen slide holders：20~30pieces/holder 
3. Output magazines：30piece/magazine 
4. Cover slip magazine capacity：120~160 pieces /magazine 
5. Specimen slide size：26*75mm 
6. Cover slip size：24*50mm 
Net Weight: 47kg 
Dimensions: 590*390*620mm
Package Info: 
Each instrument packed Wooden Case 
Gross Weight: 62kg 
Dimensions: 680*480*820mm

CS-T Cover Slipper

Description 
1. The cover-slipper is equipped with an 8-inch color touch control screen. 
2, Use circular arc cover block to reduce the production of bubbles and uniform cover to prevent 
glue overflow. 
3, With the intelligent detection function of the broken cover glass and no cover slide, the bad cover 
glass is automatically detected and removed; 
4.When the cover glass is missing, the suction unit is not effective and the instrument is alarming 
automatically, and stops working. 
5.It has the function of automatic monitoring of sealing agent to remind users to add sealing agent in 
time. 
6. The special and excellent cover-slipping mode with the cover glass to reduce the consumption of 
department supplies, and to improve the quality of the specimen slide reading. 
7. The working position of the spray needle is detected in real time, and the cover-slipper does not 
run and automatic alarm is not in the working position. 
8. With quality control function, real-time record of the number of covers and the number of covers 
collection box, automatic storage, access at any time, USB interface 2 convenient to export data. 
9.With artificial voice prompt function: after the online work is completed, there is a voice prompt 
function, the prompt frequency, volume and frequency can be adjusted, and the main interface is 
synchronized with text display and solution guidance. 
10. Real-time intelligent detection and positioning of the slide collection basket, without suspending 
the program, can extract the covered slide at any time. 
11. Equipment fault self-inspection function, timely analysis and positioning the cause of fault, 
improve the after-sales quality and efficiency. 
12. Tail gas treatment: with the function of activated carbon adsorption and exhausting waste gas, 
can effectively prevent xylene and other harmful substances to human body. 
13.The cover-slipper is equipped with the slide automatic air drying function, reduce the drying time, 
save human resources. 
14.The covered slides are automatically transferred to the built-in storage, which can store 12set of 
240 slides, which can be taken at any time to realize mass operation. The whole process does not 
need personnel care, and it is a workstation that really leaves people. 
15.The cover-slipper can be connected to form an integrated staining and cover-slipping 
workstation. The staining and cover units of the workstation can be used either alone or combined. 
Intelligent speed matching design, and the two units have no time difference pipeline operation. 
Main Technical Data: 
1. Speed of cover-slipping: Max 800 slides/hour. 
2. Capacity of slide rack: 20 slides/rack. 
3. The corresponding cover program can be selected according to the specimen type, with 6 quick 
modes of cover programs. 
4.The covered slides are automatically transferred to the built-in storage, which can store 12set of 
240 slides 
5.Size:600*600*682mm 
6.Weight:60kg
Package Info: 
Each instrument packed Wooden Case 
Gross Weight: 75kg 
Dimensions: 650*650*750mm

CS-F Cover Slipper

Description 
1. The dyeing process is fully automated, only need to load glass slides, and there is no need for 
human intervention during operation. 
2. When the dyeing is completed, the stained pieces have been centrifuged and dried (the rotating 
speed reaches 950 RPM during centrifugation) and can be directly used for microscopic 
examination. 
3. Gram dyeing meets the three-step dyeing method of machine dyeing standard and the 
four-step manual dyeing method. 
4. Support the setting of engineers to make the dyeing more refined. The (sputum, leucorrhea), 
(urine, pleural effusion and ascites, quality control bacteria) and blood culture are divided into 
three categories, with professional staining settings. Achieve the most ideal dyeing effect. 
Support the professional dyeing setting of the operator, so that the dye can be attached to the 
microorganism instantly. 
5. High pressure centrifugal spray dyeing or injection dyeing is adopted, and the glass slides are 
placed horizontally or vertically, imitating manual spray dyeing. The reagent dosage is saved, 
and there is no cross contamination between slides. The dyeing is uniform and bright without 
flake. 
6. Brushless DC motor is adopted (no ignition of brush motor) the product is safer, with long 
service life, low power consumption and low noise. 
7. 12 glass plates, up to 180 glass plates can be dyed per hour. 24 glass discs, which can stain 
more than 200 glass discs per hour.12 glass plates, up to 190 glass plates can be dyed per 
hour. 
8. The dyeing time is about 4-5 minutes. 
9. Dyeing level: crystal violet dye solution 9, iodine solution 9 and magenta dye solution 9. 
10. 7-inch large screen operation display, full Chinese operation interface, and the number of slides 
can be customized. Totally enclosed system, no need to be close to the water tank and no 
pollution to the laboratory environment. 
11. The dyeing setting can be selected according to the smear thickness, and the reagent dosage 
can be set automatically. 
12. Each set of dyeing solution can dye 600 ~ 1000 glass slides. 
13. Ethanol cleaning, special flow path cleaning and spray detection, convenient maintenance.
Main Technical Data: 
 
1. Model Number: MSS-001 
2. Short Desc: Microbiology Slide Stainer 
3. &#8220;Scope of Application: 
4. Gram staining of microbial smears in clinical, disease control, quality inspection and various， 
professional microbial laboratories.&#8221; 
5. Sample tray capacity：1-12/24/16 Depends on the number of samples 
6. Cover opening height：58cm 
7. Voltage requirements：220V，50-60Hz 
8. Safety performance：The machine can only be operated when the cover is closed. When the 
machine is running, it automatically opens the electromagnetic lock to ensure the safety of 
operators. There are indicators on the panel to display the running status of the machine. 
Net Weight: 17.5kg 
Dimensions: 560*250*540mm
Package Info: 
Each instrument packed Wooden Case 
Gross Weight: 33kg 
Dimensions: 700*700*400mm,

MSS-001 Microbiology Slide Stainer

Description 
1. This instrument is adopted FISH processing step, which can reduce a lot of manual operating 
time and avoid the damage of harmful reagent. 
2. Full touch screen operation, friendly human interface. 
3. Support restart functionality runs an unexpected power outage, when power is restored can be 
scheduled to automatically back up and running. 
4. Supporting automatic cooling function after running over. 
5. Supporting automatic warm-up function. 
6. Platform high precision of temperature control, low fluctuation. 
7. Can deal with 12 slides. 
8. Support 105 custom programs stored functions. 
9. Integrated denaturation and hybridization, hybrid, multiple-step operation three modes of 
operation.
Main Technical Data: 
1. Temperature control range : RT+5 ℃ ~100 ℃ 
2. Temperature set range :0℃~100℃ 
3. Accuracy of temperature : ≤ ± 1℃ 
4. temperature :≤ ± 1℃ 
5. Heating time: ≤2Min （ 
37℃ to 95℃） 
6. Cooling time:≤6Min （ 
95℃ to 45℃） 
7. Capacity: 12 
8. Power :350W 
9. Input voltage:220V/50-60Hz 
10. Fuse: 250V 3A Ф5×20 
Net Weight: 4.5kg 
Dimensions: 440*220*120mm
Package Info: 
Each instrument packed Wooden Case 
Gross Weight: 6kg 
Dimensions: 580*390*300mm

HS-300Y Hybridizer

Description
12. Open system, Suitable for various kinds of specimen 
13. True hands free, walk away, overnight operation. 
14. Easy Windows 
TM based programming, password protection 
15. Allows for several stainers using single computer simultaneously 
16. User-specified protocols/User’s own reagents, serval runs per day 
17. Robust, proven construction and operation 
18. No disposable pipette tips 
19. Per-run reagent volume checks 
20. Detailed reports stored 
21. No additional consumable costs 
22. No special reagents-using for different company 
Main Technical Data: 
7. Slides Capacity: 
48 
2. Reagents Capacity: 64 
3. Minimum dropping reagent : 
50ul 
4. Dropping reagent increment: 50ul, 100ul, 150ul, 200ul 
5. Maximal output power: ≤350VA 
6. Working noise: ≤60dB(A) 
7. Application: 
IHC, HE more 
8. Dimension(mm): 
1015*665*520 
9. Power supply: 220V or 110V 
10. Rated current: 
1.6A 
Net Weight: 116kg 
Dimensions: 1015*665*520mm
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 1100*750*710mm ，810*510*560mm 
Gross Weight: 158kg

HS-2300 Immuno Auto stainer

Description 
1. Immunostainer system include： stainer, Retriever computer and printing system， Which let 
you Automate and standardize your IHC experiments to help you get safe, reliable, high-quality 
staining results. 
2. The Immunostainer consists of an automated pretreatment system and an automated 
immunohistochemical staining system. Pretreatment and staining are operated separately, 
allowing for more flexible scheduling and intermediate quality control. 
3. Fully automatic Immunostainer can automatically complete the entire process of 
immunohistochemical 
staining, 
which 
provides 
advanced 
immunohistochemical 
standardization and automated solutions to overcome the hand-dyeing time-consuming, poor 
repeatability and other shortcomings. The Fully automatic Immunostainer is fast, accurate, 
reliable, reproducible, cost-effective and offers flexible workflows to meet different client needs. 
4. Allows for several stainers using single computer simultaneously. 
5. Sample volume: 50-600ul adjustable, to maximize the cost control. 
6. 3 sample loading adjustment sites to maximize reagent utilization and reduce costs. 
7. Needle 
automatic 
vacuum 
washing 
and 
drying 
function, 
effectively 
prevent 
cross-contamination. 
8. Teflon does not hang liquid sample retention, save reagents, to avoid contamination. 
9. Seperate Toxic &#038; non-toxic waste discharge, more environmentally friendly. 
10. Automatic reagent level detection, automatic detection function, more intelligent and 
convenient 
the operation is very convenient with variety of procedures. 
11. The primary antibody is open, secondary antibody is not. And reagent bottle is registered once 
and can use repeatedly, save time and reduce costs. 
 
Main Technical Data: 
1. Slides Capacity: 48pcs 
2. Reagents Capacity: 48pcs 
3. Reagent Usage: 50-600ul 
4. Cross-contamination: <10-6
5. Operation Temperature: Ambient
6. Application: paraffin， frozen， puncture， cytology smears
Dimension (L x W x D): 107*69*58cm

Package Info: 
Each instrument packed Wooden Case 
Dimensions: 1200*850*850 mm/700*400*400mm, 
Gross Weight: 116kg

HS-2400 Immuno Auto stainer

Description 
Frozen section specimens: Step 1: Fix specimen cylinder number 1 (20 seconds) → Step 2 
Washing cylinder number 4 (10 seconds) → Step 3 HE staining jar number 2 (1 minute 20 seconds) 
→ Step 4: Wash the tank number 4 (10 seconds) → Step 5: Differentiate the tank number 3 (1 time) 
→ Step 6: Wash the tank number 4 (10 seconds) → Step 7: Unblue tank number 7 (10 seconds) → 
Step 8, washing tank number 4 (10 seconds) → Step 9, Ehong tank number 8 (3 seconds) → Step 
10, washing tank number 4 (3 seconds) → Step 11: 75% alcohol tank number 9 (6 seconds) → Step 
12: Water washing tank number 4 (set 0) → Step 13: 85% alcohol tank number 10 (6 seconds) → 
Step 14: 95 % alcohol cylinder number 11 (6 seconds) → Step 15 100% alcohol cylinder number 12 
(6 seconds) → Step 16 100% alcohol cylinder number 13 (6 seconds) → Step 17 xylene cylinder 
Position number 14 (6 seconds) → Step 18 Xylene cylinder position number 15 (end in 1 second)
Main Technical Data: 
1. Number of liquid cylinders: 15: 
2. The first cylinder is an automatic start-up saving cylinder. 
3. Number of cleaning tanks: 3 
4. Number of hematoxylin tanks: 1 (water bath heating) 
5. Number of differentiation tanks: 1 
6. Number of eosin tanks: 1 
7. Number of anti-blue cylinders: 1 
8. Number of gradient alcohol tanks: 5 
9. Number of end cylinders: 1 
10. Single cylinder processing time: can be set arbitrarily from 1 second to 59 minutes 
11. The temperature setting range of the hematoxylin tank and the warm water return tank is adjustable from 0 to 99 degrees. 
12. Dyeing steps: 18 steps 
13. Number of stained slides in a single staining rack: 20 slides 
14. Infinite loop working mode of three dyeing racks 
15. Single dyeing time: 4 minutes adjustable 
16. The computer-programmed water inlet and sewage drainage system ensures that the water 
quality is clean and water-saving when cleaning glass slides in each process. 
17. Hematoxylin can be heated in a water bath, and can be colored quickly using ultrasonic waves. 
The temperature can be set arbitrarily (patented) 
18. The differentiation cylinder has precise priority processing 
19. Eohong cylinder has precise priority processing 
20. A single staining can reach 20 slides to meet the requirements of breast resection technology 
21. Three methods of returning to blue are available, among which the warm water heating method 
is sufficient and the temperature can be set arbitrarily (patented) 
22. The dyeing rack has automatic identification function 
23. It has an alarm function after the program is completed. 
24. Numbers of programs: 10 programs 
Net Weight: 55kg 
Dimensions: 810*430*450mm
Package Info: 
Each instrument packed Wooden Case 
Gross Weight: 70kg 
Dimensions:880*510*535mm

LSC-110 Slide Stainer

Description 
1. Full English color touch screen display, ATM-type operation mode. The operation is simple and 
easy to understand. 
2. Multiple sets of programs are available for editing (non-sequential editing can be performed, 
and dyeing steps and time can be programmed arbitrarily) 
3. Automatic drying temperature can be set. The temperature around the drying cylinder is 
uniform, and there is a water and gas overflow 
4. With automatic detection and automatic reset function. 
5. Strong anti-interference ability and high degree of intelligence. 
6. Automatically control the flushing water level. When the dyed hanging blue enters the washing 
tank, the water is automatically filled in the washing tank. When the hanging blue leaves the 
washing tank, the water injection is automatically stopped, and the water in the tank is drained. 
7. It has the function of locking cylinder protection 
8. The drip residence time is adjustable. The dripping time can be adjusted according to the 
sample volume and ambient temperature to ensure the purity of the reagent 
9. The number of running steps is 24 steps, (the same cylinder position can be run repeatedly) 
10. Adopt international standard synchronous toothed belt drive, low noise, high temperature 
resistance, corrosion resistance, high transmission accuracy, with photoelectric positioning 
sensor, so that the positioning is more accurate and the service life is long. 
11. Harmful gas purification treatment: protect the health of staff and prevent the working 
environment from pollution
Main Technical Data: 
1. Sixteen sets of editable programs can be programmed arbitrarily 
2. The processing volume of a single cylinder is 1000ML, and the loading capacity is 65 pieces 
each time. 
3. Single-cylinder processing time 0～99min99s 
4. The number of shakings: the shaking time of the cylinder can be adjusted arbitrarily 
5. Stirring times: can be adjusted arbitrarily 
6. The drip residence time is: 0 seconds to 300 seconds can be adjusted arbitrarily 
7. 14 cylinder positions, 1 washing cylinder (the first cylinder), one drying cylinder (the last 
cylinder), 
8. Drying temperature, 0-85℃ can be set arbitrarily 
9. Power supply: 220V 50HZ ±10℅ 
10. (10) Power consumption: ≤300W 
Net Weight:80Kg 
Dimensions: 1161*480*550mm
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 1260*615*695mm, 
Gross Weight: 110kg

LSD-600 Slide Stainer

Description 
1. Large screen English menu ,7-inch color touch screen operation; 
2. Has the intelligent key function (can not see the screen blind operation), when the display 
screen has no display and touch function damage, the main function of the dyeing machine can 
be operated normally; 
3. Program intelligent dynamic detection function, can track and detect the operation of 
specimens, and can judge and deal with various abnormal conditions, to prevent damage to 
specimens; 
4. Use of ionized decomposition of harmful gases and activated carbon filtration, fully sealed 
internal circulation systems to ensure that operators are protected from harmful gases; 
5. The washing cylinder uses the bottom of the cylinder to feed water automatically, and drains 3 
cm below the cylinder opening to prevent the water from overflowing into the instrument due to 
the failure of the instrument pump, and also to avoid the upper spray water, because the 
impulse is too large to wash out the diagnostic cells; the last cylinder is the oven. 
6. It can automatically warm up hematoxylin, eosin and other dyes, and the dyeing effect is better 
and more stable (can be set to warm or not according to the requirements of use); 
7. 18 reagents cylinder design, dye cylinder volume of 1000 ml (more than 75 pieces per batch of 
dyeable tablets) dyeing steps open, random increase or decrease settings, so that the dyeing 
machine is light and convenient, but also fully meet the requirements of dyeing; 
8. Dyeing hanging back lateral transmission using steel linear guide rail with stepping motor, so 
that the operation is more accurate, will not be inaccurate cylinder, . (Its transverse drive does 
not use wire rope, belt or synchronous tooth belt, this kind of use time in the market will become 
relaxed, resulting in cylinder inaccuracy); 
9. Can set up 30sets of running procedures to meet the requirements of a variety of dyeing 
methods; 
10. The &#8220;self-detection&#8221; item is displayed on the operating display screen of the dyeing machine, 
which has the function of preventing the abnormal protection of the card cylinder, and can 
display the running state and various functions in real time; 
11. Equipped with a special drying cylinder, dyeing after the completion of hot air drying, the real 
realization of the dyeing process once completed; 
12. Automatic data storage with power failure, incoming calls continue to run function; 
13. Has any cylinder start operation and any cylinder stop operation function; 
14. Patent for a programmable stepper motor driver (patent number zl 2012 2 0009482.3); 
15. Automatic flushing, pump-free and sensor-free automatic drainage, patent: a new type of cell 
tissue dyeing machine washing box (patent number: zl 2014); and 2 0828607.4)
Main Technical Data: 
1. Rated voltage :220 v±10 per cent AC 
2. Power frequency :50±1 hz 
3. Rated power: ≤500 W 
4. Reagent tanks :18 cylinders 
5. Tank volume: 1000 ml 
6. Number of stained slides per batch: ≥75 tablets 
Net Weight: 96.5kg 
Dimensions: 1300*600*600mm
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 1352*619*655mm 
Gross Weight: 132kg

LSD-620 Tissue Slide Stainer

Description
The big Tissue Stainer can stain large quantity slides at same time.
1. Adopt PLC control system and Electronic Touch Screen, it’s convenient to operation and low 
failure rate. 
2. Adopt high performance stepper motor and drive with Synchronous Belt, to ensure the 
balanced running, accurately fixed position, min. noise and so on. 
3. Adopt Photoelectric switch to fixed position, it has found position memory and reset 
automatically functions. 
4. It can store 5-10 different programs to meet the different staining requirements. 
5. Battery backup can be optional, to permit staining of slides to continue during the main power 
failures. 
6. It has 26 stations: From1 to 17 stations are reagent containers, 19, 21, 23 stations are water 
washing containers, 18, 20, 22 stations are waiting containers that for putting the ready staining 
racks. 24 station for loading staining rack. 0 station for unloading staining rack. 25 station is 
oven.
Main Technical Data: 
1. Specimen slide throughput: At least 200 specimen slides per hour 
(depend on the selected program) 
2. Loading capacity: 
3 -5slides rack 
3. Slide rack capacity: 
30 specimen slides 
4. Total number of stations: 26 
5. Number reagent stations: 
18 
6. Reagent container volume: 600ml 
7. Number of wash stations: 3 
8. Number of wait stations: 
3 
9. Oven: 1 (last station, 26 
th 
) 
10. Oven chamber temperature: from ambient temperature to 85°C 
11. Load/unload stations: 
1 each 
12. Incubation time setting: 
from 0 sec. up to 9999 sec. 
13. Permanent memory capacity: 5 programs, up to 24 program steps each 
14. Operation temperature range: 15°C to 35°C 
15. Relative humidity: ≤90%(+25°C) 
16. Dimension (W×D×H): 120cm×50cm×60cm 
17. Voltage: 220V, 50Hz 
18. Power rating: 300VA
Accessories: 
Standard Setting List 
1. Tanks 
26 pcs 
2. Slide basket 
1 pc 
3. Fuse (5 A) 
2 pcs 
4. Power line 
1 line 
5. Optional Accessories 
6. Extra Tank 
7. Slide Basket 
8. Transmission belt 
Net Weight: 91kg 
Dimensions: 1230*650*560mm 
Package Info: 
Each instrument packed Wooden Case 
Gross Weight: 133kg 
Dimensions: 1320*760*750mm

LSS-800 Automatic Slide Stainer

Description
1. Electrical modular design. LSS820 dyeing machine can meet the requirements of different
laboratories. No matter conventional dyeing or special deying, both can process meanwhile or
separately, in order to obtain high dyeing effect. 
2. Color touch screen can make the input and search of the data convenient, different dyeing 
procedure and dyeing process can be displayed in real time. 
3. Dyeing procedure can start throughout choosing color code and it can be displayed on the 
operation interface in real time. The workers can see and understand the process easily. 
4. There are 10 sets of different dyeing process can be chosen. 10 staining racks can dye 
meanwhile. And it can run any different programs meanwhile at any time. 
5. 26 reagent sites. Two of them can be changed into empty sites. When multi staining frame 
operates meanwhile, it can optimize the dyeing process automatically. 
6. Staining rack can load and take out throughout uploading and downloading the drawer. We can 
upload 2 staining racks, download 3 staining racks. 
7. Mechanical arm can move at high speed, reach any site in a second. The staining rack can set 
rising and falling frequency at short time. 
8. The amount of dye can up to 400 pieces one hour at most.
1. Dyeing frame capacity: 30 glass slides 
2. Loading capacity: can deal with staining rack with 10 different processes meanwhile at most. 
( Continuous upload) 
3. Total number of Site :36 
4. Total number of reagent sites:26 
5. Total number of washing site:5 
6. 500ml Reagent tank volume:500ml 
7. The amount of uploading site: 2 
8. The amount of downloading site:3 
9. The amount of stored program: 10 sets 
10. Power source: 220VAC±10%,50/60HZ 
11. Power: 200W 
12.Touch screen: color 10.4 inch (Intelligent user management interface, graphical display dyeing 
process.) 
Net Weight: 125kg 
Dimensions: 1050*600*600mm 
Package Info: 
Each instrument packed Wooden Case 
Gross Weight: 150kg 
Dimensions: 1140*715*850mm,

LSS-820 Automatic Slide Stainer

Description
LSS850 automatic slide stainer can preset the staining process according to different tissue types, 
intelligent software control the staining process, reduce the staining difference caused by operation, 
through the program presets the staining frame in accordance with the set program in each rack to 
achieve the purpose of automatic staining.
Main Technical Data: 
1．Number of Station: 32 Stations: Including 5 washing stations (can be set as reagent stations 
according to customers&#8217; requirements). 6 uploading/downloading Stations, 3 Oven stations, up to 31 
reagent stations. 
2．Water station: 5 stations. 
3．Visible planar construction is easy to observe the liquid level height of each tank position; Built-in 
LED lighting is easy observation of the staining process. 
4．With 12.1inch color touch screen and English operating interface. It no need stop when adjusting 
the parameters. 
5．Hot plate temperature: 25 to 95℃. 
6．Editable program: Can store 200 editable programs, 200 steps/program. Each step setting 
time: 1 second -23 hours 59 minutes and 59 seconds 
7．Each step can be setting 3 working modes for Precise time control: Normal, Priority (priority 
processing the lifting), Precise mode (robotic arm standing by to wait for lifting the rack) 
8．Parameters: screen that can shows the steps of the process in progress. 
9．XYZ three-axis manipulator combined movement, highly intelligent multi-threaded task 
scheduling program, high efficiency, can uploading and running 12 baskets concurrently. The 
staining speed is 720 slides/h. 
10．The mechanical arm can be set 3 working modes: Drainage, Shaking, Agitation. And can freely 
setting the parameters. 
11．12 programs can be run simultaneously and can make frozen sections, HE staining and PAPA 
staining. 
12．It can be paused or started the running program at any time when instrument working. 
13．It can be cancel the running staining program at any time, or can be renew the canceled 
running program, and the renewed program will continue to run from its pre-undo state. 
14．10 shortcut programs can be set on the main interface; Each step can be setting 3 working 
modes. 
15．Conventional HE staining, fast frozen HE staining and PAPA staining can be performed 
individually or simultaneously 
16．the basket is uploading and downloading with drawer type station. You can setting uploading/ 
downloading station freely. Various combinations to meet the needs of different situations. 
17．The uploading station has a detection sensor to automatically detect the slide rack status in the 
station; With abnormal open drawer alarm and delayed voice reminder function, drawer open 
timeout reminder time 1-120 seconds adjustable. 
18．Any tank starting function. 
19．Intelligent staining time adjustment. It can be set according to the staining days or the number 
of baskets, automatically adjust the staining time, and the single staining time can be adjusted at 
any time. 
20．On-demand water supply. Real-time detection of water intake status in the running water tank. 
21．The instruments have a built-in water flow control knob, which can adjust the water flow 
according to the water pressure to ensure adequate washing. 
7．Each step can be setting 3 working modes for Precise time control: Normal, Priority (priority 
processing the lifting), Precise mode (robotic arm standing by to wait for lifting the rack) 
8．Parameters: screen that can shows the steps of the process in progress. 
9．XYZ three-axis manipulator combined movement, highly intelligent multi-threaded task 
scheduling program, high efficiency, can uploading and running 12 baskets concurrently. The 
staining speed is 720 slides/h. 
10．The mechanical arm can be set 3 working modes: Drainage, Shaking, Agitation. And can freely 
setting the parameters. 
11．12 programs can be run simultaneously and can make frozen sections, HE staining and PAPA 
staining. 
12．It can be paused or started the running program at any time when instrument working. 
13．It can be cancel the running staining program at any time, or can be renew the canceled 
running program, and the renewed program will continue to run from its pre-undo state. 
14．10 shortcut programs can be set on the main interface; Each step can be setting 3 working 
modes. 
15．Conventional HE staining, fast frozen HE staining and PAPA staining can be performed 
individually or simultaneously 
16．the basket is uploading and downloading with drawer type station. You can setting uploading/ 
downloading station freely. Various combinations to meet the needs of different situations. 
17．The uploading station has a detection sensor to automatically detect the slide rack status in the 
station; With abnormal open drawer alarm and delayed voice reminder function, drawer open 
timeout reminder time 1-120 seconds adjustable. 
18．Any tank starting function. 
19．Intelligent staining time adjustment. It can be set according to the staining days or the number 
of baskets, automatically adjust the staining time, and the single staining time can be adjusted at 
any time. 
20．On-demand water supply. Real-time detection of water intake status in the running water tank. 
21．The instruments have a built-in water flow control knob, which can adjust the water flow 
according to the water pressure to ensure adequate washing. 
22．Reagent change remind and management functions, it can remind the operator to pay attention 
to and replace the corresponding reagent in real time according to the days or times of reagent use. 
Reagent usage is marked in different colors on the touch screen. 
23．The staining time is intelligently adjusted according to the reagent use time and the number of 
staining pieces. 
24．Fast running speed, the fastest to complete 1s differentiation. 
25．Activated carbon filter + air purification system ensure a safe working environment. 
26．When the equipment is operating, the cover is abnormally opened and the alarm is raised, and 
the manipulator stops running. This function can open or close. 
27．With artificial voice prompt alarm function, after failure or completion of work, voice prompt, 
prompt frequency, volume, number of times can be adjusted, failure occurs on the main page to 
prompt and display the solution guide, to remind technical personnel to operate in time. 
28．with the running status query function, you can understand the current execution of the step, 
remaining time and station distribution and other information. 
29．with a quality control module, including quality control Settings and overview, change of 
reagent records, running program history, reagent use details and other modules. 
30．remote intelligent monitoring: with remote alarm, remote monitoring function, you can monitor 
through the web page or APP three ways, real-time understanding of the operating status of the 
instrument, USB interface configuration, can export Excel quality control table. 
31．with two USB interfaces, you can export quality control data, you can upgrade the equipment, 
update operations. 
32．with the administrator and ordinary user login mode, can set the password, the administrator 
account has the highest authority, can be assigned to other account permissions, query Settings 
and modify operations. 
33．triple sound and light alarm system: English artificial voice alarm system, control panel 
synchronous light prompt, light color three, the main interface synchronous text display solution 
guide. 
34．basket capacity：20pcs/sheet, one running can handle 3 baskets with 60 slides. 
35．tank capacity：850ml 
Net Weight: 167kg 
Dimensions: 1180*730*680mm
Package Info: 
Each instrument packed Wooden Case 
Gross Weight: 180kg 
Dimensions: 1260*830*880mm

Staining Series &Cover Slippers LSS 850 Slide Stainer

Description
Features: 
1. It have clipper –built case, the user can put blade, wax block, or other consumable on the top of 
case. it is easy. 
2. It do not need to lubricate and maintain the microtome frequently. 
3. The hand wheel in the right can be locked in any position, and the handle can be locked in 
highest position, it is double safe for changing blade or tissue block. 
4. The specimen Orienting system: axes X and Y 8°, axis 180°. 
5. It adopt the special blade holder, it is more safe and convenient to use the disposable blade 
directly. it also can to longer the user life of disposable blade. 
Main Technical Data: 
1. Slice thickness range: 0μm～60μm 
2. Section thickness setting: 0-2 um in 0.5 um –increments 
a) 2-10um in 1 um-increments 
b) 10-20 um in 2 um-increments 
c) 20-60um in 5 um-increments 
3. Horizontal specimen stroke :20 mm 
4. Vertical specimen stroke : 50mm 
5. Slip precision: ± 5% 
6. Maximal slice section: 50 × 45mm 
7. Specimen adjustment direction: horizontal 8°, vertical 8°, rotating 360° 
8. Movement range of blade holder base: front and back ±25mm, left and right ±25mm 
9. Blade holder angle 0~10° 
Accessories: 
Standard Setting List 
1. Disposable Blade Holder 1 pc 
2. Specimen Cassette Clamp 
1 pc 
3. Hexagonal Wrench 
1 set 
4. Brush 
1 pc 
5. Optional Accessories 
6. Paraffin Wax Holder 
7. Feather Microtome Blade 
Net Weight: 30kg 
Dimensions: 500*480*280mm 
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 520 *520*450mm, 
Gross Weight:41 kg

HS-2205 Rotary Microtome

Description
A newly developed products after ，it has adopted internationally advanced design. This microtome 
is classic of the current advance craftwork . it reach the perfect mixture of electronic and 
mechanism.. So the customer can operate it easily and conveniently. 
Features: 
1. Adopting internationally advanced stepper motor drive, high slicing accuracy, smooth and quiet 
operation. 
2. LCD screen with English menu display, buttons to adjust slice and trimming thickness, 
automatic slice counting, position memory, fast forward, fast rewind, and fine adjustment of the 
clamping head position. 
3. The sample retraction function avoids damage caused by reverse friction between the 
specimen tissue and the section, making the blade smoother and extending the service life of the 
blade. 
4. With automatic identification of half-cut function, turning the handwheel half a circle 
counterclockwise can realize automatic trimming, making slicing more efficient; 
5. A variety of trimming methods, in addition to half-cutting, you can also press the fine-tuning 
button while turning the handwheel to achieve trimming, which is faster; 
6. Two-in-one knife holder, which can easily switch between wide and narrow blades 
7. Slicing is smoother and the service life of the blade is extended. 
8. The handwheel can be locked at any position, making section safer and more convenient. 
9. A large capacity waste tray that is easy to disassemble, ensuring clean and hygienic section 
work 
10. With automatic reset function, the device will automatically return to the starting point after
starting or running to the limit position. 
Main Technical Data: 
1. Slice thickness range: 0.5μm～100μm(3~5um is the best slicing effect) 
2. Section thickness setting：0.5～5μm，in 0.5μm increment 
a) 5～20μm，in 1μm increments 
b) 20～60μm,in 5μm increments 
c) 60～100μm，in 10μm increments 
3. Trimming section range : 1～600μm 
4. Trimming thickness setting：1～10μm，in 1μm increment ; 
a) 10～20μm，in 2μm increments 
b) 20～50μm，in 5μm increments; 
c) 50～100μm，in 10μm increments; 
d) 100～600μm，in 50μm increments 
5. Horizontal specimen stroke :20mm 
6. Vertical specimen stroke: 55mm 
7. Specimen retraction :20um 
8. Slip precision: ± 5% 
9. Maximal slice section: 50 *45mm 
10. Dimension: 530 * 520 * 450mm 
Accessories: 
Standard Setting List 
1. Disposable Blade Holder 1 pc 
2. Specimen Cassette 
1 pc 
3. Fuse (2A) 
2 pcs 
4. Power line 
1 line 
5. Hexagonal Wrench 
1 set 
6. Brush 
1 pc
Optional Accessories 
1. Paraffin Wax Holder 
2. Feather Microtome Blade 
Net Weight:32kg 
Dimensions: 500*450*300mm 
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 520*520*450mm 
Gross Weight:43 kgs

HS-3315 Semi- automatic Microtome

Description
1. Streamlined molded housing results in attractive appearance and is easy to clean. 
2. Full-automatic sectioning with adjustable speed and three sectioning modes: continuous, step 
and single. 
3. LED display 
4. Electronic trim function makes it easy to switch from trim and section mode 
5. Specimen retraction mechanism protects specimen from unintended blade damage 
6. Section counting function counts total section pieces and total thickness. 
7. Unit contains a precise micro motion specimen feeding system which uses a micro computer, 
optical signal and stepper motor to control specimen feeding resulting in more precise 
specimen feeding. 
8. Internationally accepted slide mechanism and groove ensures the precision of specimen 
movement while making the unit free from lubrication and maintenance requirements. 
9. Unit contains a handwheel force balancing system for adjusting the balancing force during 
sectioning, making rotation even and smooth; 
10. Two safety locking mechanisms on the handwheel; one locks on the top; the other locks at any 
position 
11. The disposable blade can move horizontally to avoid the dangers of unintended contact with 
the blade. Every blade cuts specimen into three equal parts, which ensures the entire use of blade 
edge. 
12. The waste tray collects sectioning debris are easily removed for cleaning 
13. Cassette clamp and C clamp are optional 
14. Specimen orientation on X/Y axes 8° 
15. Alarm to warn of forward or backwards limitation. 
16. Self-diagnostic prompt. 
17. Emergency stop and foot switch (optional) 
Main Technical Data: 
1. Section thickness range：0.5μm～100μm(3~5um is the best slicing effect) 
2. Section thickness setting：0.5～5μm，in 0.5μm increment 
a) 5～20μm，in 1μm increments 
b) 20～60μm,in 5μm increments 
c) 60～100μm，in 10μm increments 
3. Trimming thickness: 1～600μm 
4. Trimming thickness setting：1～10μm，in 1μm increment ; 
a) 10～20μm，in 2μm increments 
b) 20～50μm，in 5μm increments; 
c) 50～100μm，in 10μm increments; 
d) 100～600μm，in 50μm increments; 
5. Specimen retraction: 10～150μμm(Can be closed)，in 1μm increments ; 
6. Specimen vertical stroke：60mm 
7. Specimen horizontally stroke：25mm 
8. Max specimen size with C clamp (H×W)：55mm*45mm 
9. Dimensions (W×D×H)：570*510*490mm 
10. Net Weight：34.6kg
Accessories: 
Standard Setting List 
1. Disposable Blade Holder 1 pc 
2. Specimen Cassette 
1 pc 
3. Fuse (2A) 
2 pcs 
4. Power line 
1 line 
5. Hexagonal Wrench 
1 set 
6. Brush 
1 pc
Optional Accessories 
 
1. Paraffin Wax Holder 
2. Feather Microtome Blade 
Out Package Info: 
Each instrument packed Wooden Case 
Gross Weight: 45kg 
Dimensions: 695*525*480mm

HS-3345 Fully Automatic Microtome

Description
HS3355 computer microtome is a new product launched by our company after HS3315 microtome 
series. This microtome integrates the essence of our factory&#8217;s technology, adopts international 
advanced design concepts, is more in line with ergonomic design, and mainly uses imported parts. 
Stepper motor feed system; high-precision cross ball guide rail; recirculating ball screw and other 
precision parts make the slice accuracy higher. This microtome is a model of current advanced 
technology, a perfect combination of electronics and machinery, and a new development direction of 
tissue sectioning.
Features: 
1. Reasonable layout and simple operation; 
2. Adopting 4.3-inch touch screen design, easy to understand, Chinese and English are optional; 
3. External control panel, more convenient operation; 
4. Two sets of independent position memory function, multiple setting methods; 
5. The chuck position is digitalized, and the input coordinates automatically reach the coordinate 
position; 
6. Intelligent sensing half-repair function improves work efficiency. Only half a circle of handwheel is 
required to achieve the repair, and no other operation is required during the whole process; after the 
half-knife repair is completed, turn the handwheel in a full circle to automatically switch to the slicing 
mode 
7. Unique sample retraction function, the retraction thickness is adjustable, which avoids the damage caused by the reverse friction between the specimen tissue and the slicing knife, makes 
the blade smoother, and prolongs the service life of the blade; 
8. Cross-ball double guide rail design, solid structure, stable performance; 
9. Adopt advanced speed regulation method, small vibration, low noise; 
10. A variety of tissue chucks are optional, bidirectional sampling, suitable for samples of different 
hardness and shapes; 
11. The knife holder body can be accurately displaced laterally, and the full length of the blade can 
be used without moving the blade with fingers, avoiding danger; at the same time, each blade can 
be divided into three parts to cut wax block tissue, which triples the service life of the blade, 
compatible with wide blades and narrow blades, with built-in knife guards and knife retracting 
devices 
12. The body surface is made of metal spraying, with high strength, corrosion resistance, smooth 
lines and elegant appearance. 
13. The handwheel can be locked in the upper and lower positions, making the slicing work safer 
and more convenient 
14. The knife holder adopts a dovetail groove structure base, which is more accurate and stable in 
forward and backward movement and locking; 
15. The large-capacity waste chip trough with magnetic function is easy to disassemble and install, 
making the slicing work clean and hygienic; 
16. The sample positioning system with 0 position can be adjusted on the X/Y axis and the sample 
can be positioned horizontally at ±8 degrees;
Main Technical Data: 
1. Slice thickness: 0μm~100μm (3~5um is the best slicing effect) 
2. Setting range: 0μm~5μm increment value 0.5μm 
5μm~10μm increment value 1μm 
10μm~20μm increment value 2μm 
20μm~50μm increment value 5μm 
50μm~100μm increment value 10μm 
Numbers can be directly entered through the touch screen 
3. Trimming thickness: 0μm~800μm 
4. Setting range: 0μm~10μm increment value 1μm 
10μm~20μm increment value 2μm 
20μm~50μm increment value 5μm 
50μm~100μm increment value 10μm 
100μm~800μm increment value 50μm 
Numbers can be directly input through the touch screen 
5. Sample retraction: 0μm~250μm 
6. Horizontal specimen stroke: 30mm
7. Vertical specimen stroke: 70mm 
8. Maximal slice section: 50*45mm 
9. Slip precision: ± 5% 
10. Knife holder angle: 0~15° 
11. Input power: AC220V/110V frequency 50/60HZ 
12. Dimension: 590*440*320mm 
13. Net weight: 33kg
Package Info: 
Each instrument packed Wooden Case 
Gross Weight: 43kg 
Dimensions: 530*520*450mm

HS-3355 Semi Automatic Microtome

Description
1. Reasonable layout and simple operation; fully automatic continuous sectioning function; three 
modes of continuous, stepping and single slice are optional, and the sectioning speed is adjustable; 
2. Adopting 4.3-inch touch screen design, easy to understand, Chinese and English are optional; 
3. External control panel, more convenient operation; 
4. Two sets of independent position memory function, multiple setting methods; 
5. The chuck position is digitalized, and the input coordinates automatically reach the coordinate 
position; 
6. Intelligent sensing half-repair function improves work efficiency. Only half a circle of the 
handwheel is required to achieve the repair, and no other operation is required during the whole 
process; after the half-knife repair is completed, turn the handwheel in a full circle to automatically 
switch to the sectioning mode 
7. Unique sample retraction function, with adjustable retraction thickness, avoids damage caused 
by reverse friction between the specimen tissue and the slicer, makes the blade smoother, and 
prolongs the service life of the blade; 
8. Cross-ball double guide rail design, solid structure, stable performance; 
9. Adopt advanced speed regulation method, small vibration, low noise; 
10. A variety of tissue chucks are optional, bidirectional sampling, suitable for samples of different 
hardness and shapes; 
11. The knife holder body can be accurately displaced laterally, and the full length of the blade can 
be used without moving the blade with fingers, avoiding danger; at the same time, each blade can 
be divided into three parts to cut wax block tissue, which triples the service life of the blade, 
compatible with wide blades and narrow blades, with built-in knife guards and knife retracting 
devices. 
12. The body surface is made of metal spraying, with high strength, corrosion resistance, smooth 
lines and elegant appearance. 
13. The handwheel can be locked in the upper and lower positions, making the slicing work safer 
and more convenient. 
14. The knife holder adopts a dovetail groove structure base, which is more accurate and stable in 
forward and backward movement and locking; 
15. The large-capacity waste chip trough with magnetic function is easy to disassemble and install, 
making the slicing work clean and hygienic; 
16. The sample positioning system with 0 position can be adjusted on the X/Y axis and the sample 
can be positioned horizontally at ±8 degrees;
Main Technical Data: 
1. Slice thickness: 0μm~100μm (3~5um is the best slicing effect) 
2. Setting range: 0μm~5μm increment value 0.5μm 
5μm~20μm increment value 1μm 
20μm~60μm increment value 5μm 
60μm~100μm increment value 10μm 
Numbers can be directly entered through the touch screen 
3. Trimming thickness: 0μm~800μm 
4. Setting range: 0μm~10μm increment value 1μm 
10μm~20μm increment value 2μm 
20μm~50μm increment value 5μm 
50μm~100μm increment value 10μm 
100μm~800μm increment value 50μm 
Numbers can be directly input through the touch screen 
5. Sample retraction: 0μm~250μm 
6. Horizontal specimen stroke: 30mm 
7. Vertical specimen stroke: 70mm 
8. Maximal slice section: 55*45mm 
9. Slip precision: ± 5% 
10. Knife holder angle: 0~15° 
11. Languages: 2 (Chinese and English) 
12. Input power: AC220V/110V frequency 50/60HZ 
13. Dimension: 590*440*320mm 
14. Net weight: 35kg
Package Info: 
Each instrument packed Wooden Case 
Gross Weight: 45kg 
Dimensions: 695*525*480mm

HS-3385 Fully Automatic Microtome

Description
1. Sectioning thickness range: 0.5～ 100 μm，Default: 6µm 
2. Section Thickness Setting: 0.5～5 µm，Step 0.5µm 
5～20 µm，Step 1µm 
20～60µm，Step 5µm 
60～100µm，Step 10µm 
3. Trim Thickness range: 1～ 600 μm，Default：20µm 
4. Trim Thickness Setting: 1～ 600 μm，Default：20µm 
1～ 600 μm，Step：20µm 
20～50µm，Step 5µm 
50～100µm，Step 10µm 
100～600µm，Step 50µm 
5. Feeding Drive Mode: Driven by stepper motor, feeding is precise and stable 
6. Specimen Head Memory: Memorize the specimen head feeding location, after replacing the new 
tissue specimen, the specimen head can directly reach the memory location with one click. 
7. Specimen Head Retraction: Support retraction in the range of 0 to 250 µm (0µm is off). The 
default value is 20µm. 
8. Specimen Head Coarse Feeding Speed: 900～2000µm/s，Default：1800µm/s 
9. Specimen Head Fine Feeding Speed: 100～900µm/s，Default：300µm/s 
10.Horizontal Stroke of Specimen Head: 25±1mm 
11. Vertical Stroke of Specimen Head: 60±1mm 
12.Specimen Positioning: Specimen disc 360°rotation, 0 Digit Indication 
13.Specimen Head Return: Press the “Fast Backward” key to quickly return, and press the “Fast 
Backward” key again to stop the return, the return speed is 2000µm/s 
14.Handwheel Lock: Locked at 6 O’clock, locked at 12 O’clock 
15.Knife Holder: Compatible with high profile and low profile blade, horizontal movement 48mm, 
Angle adjustment: 0 ~ 15° 
Refrigeration Parameters: 
1.Refrigeration Positions: Multi-point refrigeration, support 4 positions refrigeration including cryo 
chamber, specimen head, knife holder, and freezing shelves 
2.Temperature Display: Temperatures of cryo chamber, specimen head, knife holder, and freezing 
shelves 
3.Temperature Setting: Specimen head: -5°C～-50 °C，default: -15℃ 
4.Refrigeration Method: With One Compressor 
5.Number of Freezing Stations: 3 
Auxiliary Parameters: 
1.Disinfection Function: UV disinfection, manual disinfection, 30min, 60min, 180min optional 
2.Lighting: Sliding window with induction automatic lighting, support on/off control by hand, lighting 
brightness can be adjusted 
3.Data Accumulation: Sect/Trim thickness and times are cumulative and zeroable 
4.Automatic Standby: Stand-by time range: 1～60min; Default 5min 
5.Knife Anti-collision Function: Support position marking for knife anti-collision, the sign can be 
re-marked after moving the knife holder 
6.Audio Alerts: When specimen head reaches the front or the rear limit, all there will have the audio 
alerts 
7.Screen: With 5 inch colour LCD touch screen, any function and parameters can be operated and 
set through the touch screen, easy to operate 
8.Sliding Window: Single pane 
9.Key Panel: The left side of the device is equipped with a physical keypad, which supports common 
functions such as fast forward, fast backward, slow forward, slow backward, thickness modified, 
sect/trim conversion
Accessory Parameters:
1.Knife Protector: With eye-catching red colour, metal material used, fixed on the knife holder, easy 
to operate 
2.Knife Ejector: Integrated on the knife protector, blade ejected by push-button, and blade 
replacement is safe and quick 
3.Specimen Discs: Planar structure design, large contact area with freezing shelves and specimen 
head, higher freezing efficiency for specimen; The current standard disc is φ 35mm, one size 
specimen holder 
Power: 370W 
Dimension: Width * Depth * Height: 590mm(Handle Included) * 715mm * 445mm 
Net Weight: 70kg 
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 815*690*595mm 
Gross Weight: 88KG

HS2040 Benchtop Cryostat

Description
1. Modular control system: 
Defrost automatically / manually. Each defrost time is 15 minutes by default, or the box temperature 
rises to -5°C during the defrosting process, the defrosting will end in advance 
Hibernation automatically / manually; 
UV sterilization; 
Semi-conductor refrigerant; 
Slice number and thickness calculation; 
1. Movement speeds of specimen clamp. 
Appearance: 
one-time injected model cover; 
Anti-fog heating glass design; 
Chromatic liquid crystal touch screen. 
Microtome 
light and smooth handwheel with locking device on it; 
Specimen clamp enables to adjust triaxially with a block in the centre to go back 
High precision guide rails made in Germany make transmission smooth durable and be able to cut 
hard sample; 
Retraction 
Freezing chamber 
Extra large chamber with wide freezing shelf may hold 20 specimen discs meanwhile. 
With waste tray and instrument rack. 
Blade holder: 
Wide or narrow blades optional; 
A anti-fatigue cam lock ensures blades clamp tight; 
Blade clamp can be moved horizontally on the guide rail for safety and making full use of a blade; 
Glass anti rolling plate to adjust angle and gap with pressing plate; 
A pushing rod pops the blade out. 
Relative humidity for transport and storage: Maximum 60 %, non-condensing 
IEC 61010- 1 classification: Pollution level 2; Over-voltage category II 
Atmospheric pressure:700 hPa ~ 1060hPa 
A weighted noise level: ≤ 70 dB (A 
Altitude: ≤2000 m
Main Technical Data: 
1. Electrical: 
Voltage frequency: 220-240VAC,50Hz; 
220-240VAC,60Hz; 
110- 127VAC,60Hz. 
Main fuse: 4A 
Power consumption: 220-240VAC,1400VA; 
110- 127VAC, 1200VA; 
2. Refrigerating: 
(1) Freezing chamber 
The range of temperature setting : ﹣35℃-40℃ adjustable 
Defrost: Manual / Auto 
Refrigerating capacity: 690 W 
Refrigerate :R449A/400g±5g 
3. Quick -freezing shelf: 
Freezing shelf’s operating temperature: -40℃ ~40℃ 
Minimum reaching temperature :-60℃ (+5℃) 
Number of specimen holder freezing points : 18 
Number of semi-conductor freezing points : 2 
4. Microtome technical data: 
Setting range of section thickness :1 um &#8211; 100 um 
5. Section thickness setting： a)1 um &#8211; 20 um, with a step of 1 um 
b)20 um &#8211; 50 um, with a step of 2 um 
c)50 um &#8211; 100 um, with a step of 5 um 
Section thickness deviation:±20% 
6.Trimming thickness range: 
1μm~600μm 
a)1μm~50μm, with a step of 5μm 
b)50μm~100μm, with a step of 10μm 
c)100μm~600μm, with a step of 50μm 
7.Sample retraction: 0~200μm adjustable, with a step of 5μm 
8.Specimen’s horizontal stroke :25 mm± 1mm 
9.Specimen’s vertical stroke :59mm±0.5mm 
10.Specimen’s max size: 55 mm *55 mm 
11.Specimen clamp ‘s max adjustable angle : 12°for X＆Y axis, 360°for Z axis 
12.Sample slow forward and rewind speed: 300μm/s 
13.Sample fast forward and rewind speed: 900μm/s 
14.Dimensional ：780 mm(650 without handwheel ) * 700 mm *1280 mm, ±5% 
Net weight: 120 kg
Accessories: 
Standard Setting List 
1. Specimen Disc 
10 pcs 
Fuse (4A) 
2 pcs 
2. Appliance Stand 
1 pcs 
3. Power line 
1 line 
4. Hexagonal Wrench 
1 set 
5. Brush 
1 pc 
6. Handle 
1 pc 
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 913*804*1467mm 
Gross Weight: 208±10kg

Microtome Series HS-4000 Semi-automatic Cryostat

Description
Round tissue bath has black non-stick coated interior to reduce glare and improve visibility. Top
ledge allows space for preheating or for evaporating away any remaining water. Durable fiberglass
insulated body prevents heat loss. Glass lid and detachable power cord for easy cleaning. 
Main Technical Data: 
1. Capacity: 2.5L 
2. Temperature range: RT to 75˚ C 
3. Outside Size: 270mm(D)*210mm(H) 
4. Interior Size: 210mm(D)*65mm(H) 
5. Power consumption: 400W 
6. Power supply: AC 110V/220V±10%, 50/60Hz 
7. Net Weight:3 kg 
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 340*350*160mm, 
Gross Weight: 4kg

HS-1001 Tissue Floating Water Bath

Description
It is composed in three areas, water Flattening Bath, Slide Drying Bench and a multipurpose Tray.
Features: 
1. Adopting modular design, the three parts of water Flattening Bath, Drying slice and Baking slice 
have independent temperature control accurately 
2. Black enamel polymer bleaching tank, clear contrast when fishing, easy to operate. 
3. Unique corrugated drying slot design, the slides are inserted at an oblique angle of 60°, which 
is convenient for actual operation, and can handle 40 slides at the same time. 
4. The baking sheet room can hold 3 dyeing racks of 30-40 sheets, and can also put 2pcs 250ml 
beakers to melt the wax at the same time, which can satisfy High-volume work requirements 
5. The baking room can set different baking time according to the temperature, and there is an 
audible alarm
Main Technical Data: 
1. Dimension: (W-D-H) 510*340*220 mm 
2. Dimension of Water Bath: (W-D-H) 190*140*70 mm 
3. Temperature control range: three parts all adjustable from 30-90℃, automatic constant 
temperature 
4. Net Weight:11 kg 
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 550*340*220mm,Gross Weight: 13.5kg

HS-1145 Tissue Flotation Workstaion

Description
1. Heat conduct fast, durable. 
2. Self memory of temperature. 
3. Display presetting temperature &#038; current temperature. 
4. Corrosion-resistance of the bath.
Main Technical Data: 
1. Range of setting temperature: ambient to 90°C (constant adjusting). 
2. Temperature precise error: + 2°C. 
3. Allowance ambient temperature: 0 &#8211; 40°C. 
4. Working voltage: 220 V /50 Hz. 
5. Power: 250 W. 
6. Dimensions (W x D x H): 340 x 340 x 120 mm 
7. Net Weight:5.3 kg
Package Info: 
Each instrument packed Wooden Case 
Outer Case Dimensions: 450*400*200mm, 
Gross Weight: 7kg

HS-1135 Tissue Baking Processor

Description
1. Model Number: HS1125 
2. Short Desc: Tissue Water Bath 
3. Heat conduct fast, durable. 
4. Self memory of temperature. 
5. Display presetting temperature &#038; current temperature. 
6. Corrosion-resistance of the bath.
Main Technical Data: 
1. Range of setting temperature: ambient to 90°C (constant adjusting) 
2. Temperature precise error: +2°C. 
3. Allowance ambient temperature: 0 &#8211; 40°C. 
4. Working voltage: 220 V /50 Hz. 
5. Power: 200 W. 
6. Dimensions (W x D x H): 340 x 340 x 120 mm 
7. Net Weight:4.7kg
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 450*420*200mm, 
Gross Weight: 7kg

HS-1125 Tissue Water Bath

Description
The grooved heating surface channels melted wax to a removable collection tray. The collection
tray connects magnetically to the base of the main unit. Disposable plastic liners are included to
insert into the collection tray for easy disposal of runoff wax. This unit now includes a digital control 
panel for personalized settings. 
1. Remove the wax trimmer from its packaging and place it on a stable workstation. We recommend 
that you retain the carton and packaging. 
2. The wax trimmer comes with a detachable AC power cord. Connect the cord to the port located 
on the back of the unit. When ready to use, plug the cord 
into a power source. 
3. Attach the magnetic paraffin collection tray at the bottom of the unit and 
insert a plastic 
collection tray insert. The brim of the plastic liner can be folded down along the side of the tray that 
sits against the unit. The magnet will hold the collection tray in place. 
4. Flip the power switch to the ON position to begin use and adjust temperature. (See Operation 
section for instructions) 
OPERATION &#8211; Reference the diagrams on the next page for best use. 
1. Plug in your wax trimmer and flip the Power Switch to the ON position. The digital display will 
illuminate and display the current temperature of the unit. 
2. Press the SET Key (bottom left button) to switch to the temperature setting mode. The setting will 
blink, and you can use the up and down Temperature 
Setting buttons (right side buttons) to set 
your desired temperature. To lock in your desired temperature, press the SET Key again and the 
unit will begin to 
heat to that temperature. The unit will remember this setting during next use until 
it is changed. 
3. The suggested operating temperature for this model is 80-90° C. The user may increase or 
decrease the temperature to make the paraffin melt faster or slower. This model should NOT be set 
higher than 100° C. Temperature control range: ambient temperature ~ 110°. 
4. There is a red LED Light at the top left of the display to show that the unit is heating. 
5. Allow for up to 10 minutes of heating time to reach the desired temperature. DO NOT permit 
anything other than the paraffin covered cassettes to touch the heated surface. Ensure that loose 
sleeves, clothing, and jewelry are kept away from the heated surface. In case of injury, consult a first 
aid kit regarding treatment for burns or contact a doctor. 
6. Ensure that the cassettes are flat. Each cassette should be pulled in a downward 
direction against the grain of the surface. This removes excess paraffin from the side of the 
cassette. 
Net Weight :3kg 
Dimensions: 225*210*140mm 
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 370*210*260mm, 
Gross Weight: 4kg

ES-100 Wax Trimmer

Description
1.The full automatic procedure control &#038; new heating element gives feature of quick heating &#038; 
energy saving 
2.The temperature survey integration block from American DALLAS Corporation has been used to 
make it precise in temperature survey and credible in performance 
3.It possesses the function of memorization to keep the set temperature automatically after startup 
4.The LED shows heating state 
Main Technical Data: 
1. Range of temperature: ambient～70℃ 
2. Precision: ±1% 
3. Voltage:AC220V 50HZ / AC110V 60 HZ, Power: 1200VA 
4. Capacity: 10000ml 
5. Dimension:350*450*510mm 
6. Net Weight: 10KG 
Package Info: 
Each instrument packed Wooden Case 
Dimensions: 510*450*530mm, 
Gross Weight: 15kg

YSSY-820 Infusion Pump

Product Description

Similar Products

YSZS-810 Syringe Pump

Ksh122,200

YSOCS-10 10L Oxygen Generator

Ksh201,500

YSOCS-5D 5L Oxygen Generator

Ksh126,750

YSRFS-100A Plasma surgical system

Ksh1,734,200

YSESU-350Y Surgical Generator

Ksh383,500

TenTabs Zoncare E10 3 Channel Digital ECG Machine With Touchscreen Des...

Ksh129,350

Multi-parameter Patient Monitor YSPM80C

Ksh139,750

YSAED-100 AED

Ksh302,250

YSOTDM7000 Defibrillator Monitor

Ksh1,202,500

YSOT-LED97 Single -Dome LED theatre light

Ksh271,700

YSOTLED9793 Double-Dome LED Theatre Lamp

Ksh504,400

YSOT-KJ4D 4- Function electric operation table

Ksh403,650