Glory plastic Distemper 1L
wsg-49047
Description;
Excellent Hiding.
Good Adhesion.
Good Flow and Leveling.
Low VOC and Lead-Free.
Excellent Dry Scrub Resistance.

Glory plastic Distemper 1L

The Paints Hub

Glory plastic Distemper 4L
Wsg-49048
Description;
Excellent Hiding.
Good Adhesion.
Good Flow and Leveling.
Low VOC and Lead-Free.
Excellent Dry Scrub Resistance.

Glory plastic Distemper 4L

Glory plastic Distemper 20L 
Wsg-49049
Description;
Excellent Hiding.
Good Adhesion.
Good Flow and Leveling.
Low VOC and Lead-Free.
Excellent Dry Scrub Resistance.

Glory plastic Distemper 20L

Glory Paints Plastic Emulsion 1L 
WSG-49050
Description;
Glory Paints Plastic Emulsion 1L

Glory Paints Plastic Emulsion 1L 

Glory Paints Plastic Emulsion 4L 
WSG-49051
Description;
Glory Paints Plastic Emulsion 4L

Glory Paints Plastic Emulsion 4L

Glory Paints Plastic Emulsion 20L 
WSG-49052
Description;
Glory Paints Plastic Emulsion 20L

Glory Paints Plastic Emulsion 20L

Glory paints Cover Emulsion 0.5L
WSG-49053
Description;
Glory paints Cover Emulsion 0.5L

Glory paints Cover Emulsion 0.5L

Glory paints Cover Emulsion 1L
WSG-49054
Description;
Glory paints Cover Emulsion 1L

Glory paints Cover Emulsion 1L

Glory paints Cover Emulsion 4L
WSG-49055
Description;
Glory paints Cover Emulsion 4L

Glory paints Cover Emulsion 4L

Glory paints Cover Emulsion 20L
Wsg-49056
Description;
Glory paints Cover Emulsion 20L

Glory paints Cover Emulsion 20L

WACKER® GS &#8211; GENERAL SANITARY
WSG-49066
Description;
WACKER® GS &#8211; GENERAL SANITARY is a one-part, acetoxy silicone sealant for general purpose sealing. This product is mildew resistant and therefore particularly suitable for sanitary applications.
&nbsp;
WACKER® GS &#8211; GENERAL SANITARY cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.
&nbsp;
&nbsp;

WACKER® GS - GENERAL SANITARY

WACKER® GP &#8211; GENERAL PURPOSE SEALANT 280ml
WSG-49067
Description;
WACKER® GP &#8211; GENERAL PURPOSE is a one-component, acid-curing, silicone sealant for general purpose sealing.
&nbsp;
WACKER® GP &#8211; GENERAL PURPOSE cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber

WACKER® GP - GENERAL PURPOSE SEALANT 280ml

Wacker® CS – Construction Seal 7
WSG-49068
Description;
WACKER® CS – CONSTRUCTION SEAL 7 is a one-part, neutral low modulus silicone sealant with outstanding adhesion for construction and exterior weather sealing applications.
&nbsp;
Properties
&nbsp;
WACKER® CS – CONSTRUCTION SEAL 7 cures at room temperature in the presence of atmospheric moisture to give a permanent flexible silicone rubber.
&nbsp;
Special features
&nbsp;
Almost odorless
Matt finish
Long shelf life
Non-sag
Excellent tooling characteristics for professional use
Readily gunnable both at low (+5 °C) and high (+40 °C) temperatures
Rapid crosslinking: quickly becomes tack-free and crack resistant
Solvent-free, thus featuring low volume shrinkage during cure
Flexible at low (-40 °C) and high temperatures
(+150 °C) following cure
Excellent weatherability
Non-corrosive to metals and suitable for alkaline substrates such as concrete, mortar, fibrous cement
Application
&nbsp;
Sealing of connection and expansion joints
Suitable for weather sealing of many construction materials (e.g. glass, aluminium, stell, stone, concrete plastics)
Packaging
&nbsp;
WACKER® CS – CONSTRUCTION SEAL 7 is usually supplied in standard size cartridges that fit all standard caulking guns. Additionally, it is available in convenient sausages.
&nbsp;
Safety notes
&nbsp;
Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from WACKER subsidiaries.
&nbsp;
During vulcanization methanol and ethanol are released. These vapours should not be inhaled for long periods or in high concentration. Hence, good ventilation of the workplace is necessary.
&nbsp;
Should uncured silicone rubber come into contact with eyes or mucous membranes, the affected area must be rinsed thoroughly with water as irritation will otherwise be caused. Avoid prolonged contact of uncured sealant with the skin – use a dry cloth or paper to remove it.
&nbsp;
Keep out of reach of children. Cured silicone rubber, however, can be handled without any risk to health.

Wacker® CS – Construction Seal 7

Crown Thinner For Two – Pack Polyurethane 1 lts
WSG-49069
Description;
Crown Thinner For Two – Pack Polyurethane 1 lts

Crown Thinner For Two – Pack Polyurethane 1 lts

Crown Standard Thinner
WSG-49070
Description;
Crown Standard Thinner

Crown Standard Thinner

Crown Roadline Paint
WSG-49071
Description;
Crown Roadline Paint
&nbsp;
A matt, durable, hardwearing finish designed for use for traffic lines and sign markings on general road surfaces and parking spaces. A reflective finish can be achieved, if required, by sprinkling Ballotini beads on to the wet paint film or by thoroughly dispersing Ballotini in the paint prior to application.
&nbsp;
Characteristics:
&nbsp;
Manufactured from high-quality pigments and a mixture of high-quality resins for added durability.
&nbsp;
Advantages: Excellent adhesion. Good flexibility and quick drying.
&nbsp;
Finish: Matt.
&nbsp;
Application: By brush or spraying machine.
&nbsp;
Thinning &amp; Mixing: Crown Road Marking Thinner. Stir well before use. Avoid overthinning.
&nbsp;
Drying Time: 4 -10 minutes.
&nbsp;
Spreading Capacity: 2½ – 3 m2/l @175µm WFT as per KEBS specification.
&nbsp;
Colour range: White, Yellow and Black.
&nbsp;
Equipment Cleaner: Crown Road Marking Paint Thinners.
&nbsp;
Pack Sizes: 1 litre, 4 litres

Crown Roadline Paint

Crown White Spirit
WSG-49072
Description;
Crown White Spirit is used with most solvent-based decorative primers and finishes including:
&nbsp;
Gloss and Eggshell enamels
Undercoats and Primers for wood
Metal and plaster
Roof and Floor Paints
Aluminium and Bituminous Paints
Single pack varnishes and stains
Whilst inferior quality thinners can be used for cleaning equipment, it is important to use only Crown White Spirit for thinning as the use of inferior materials will affect the performance of the paint both with regard to the appearance of finish and drying characteristics.
&nbsp;
UNIQUE SELLING POINT (USP)
Slow-drying hence not evaporating fast, thus aiding adhesion of coatings to surfaces
Excellent prevention of paint from hardening and ruining the bristles
Wide range of products including gloss and eggshell enamels, undercoats and primers, roof and floor paints, bituminous and single pack varnishes and stains
Excellent cleaning properties
SKU: N/A Category: Primers, Thinners and Undercoats

Crown White Spirit

Crown Tp Acrylic Roadline semi gloss Black 4 ltrs
WSG-49073
Description;
Crown Tp Acrylic Roadline semi gloss Black 4 ltrs

Crown Tp Acrylic Roadline semi gloss Black 4 ltrs

Hymeg AD12 Insulating Varnish
WSG-49074
Description;
A hard curing insulating varnish with excellent penetration, bond strength and resistance to moisture and corrosive materials. Designed for use as a general-purpose insulating varnish for stators, transformers and rotating parts for Class A (105oC) through to Class H applications (180oC).
Characteristics: Based on modified polyester resin.
Advantages: High bonding strength and penetration. Excellent moisture and chemical resistance.
Appearance: Clear fluid.
Application: By immersion.
Thinning: No thinning required; supplied ready for use
Equipment Cleaner: Xylene.
Pack Sizes: 5 litres
Drying Time: 1 hour @ 165oC.
SURFACE PREPARATION: Ensure that the surface is dry and free from all oil, grease, dirt, etc.
For health &amp; safety information, please refer to our Material Safety Data Sheet (MSDS).

Hymeg AD12 Insulating Varnish

Crown Rust Remover 5L
WSG-49075
Description;
A water-based solution of surfactants and organic acids in water specially formulated for the safe and effective removal of rust from ferrous metal objects.
&nbsp;
Key features: Will not harm skin. Will not damage paintwork. Removes rust overnight
&nbsp;
Limitations: Not suitable for direct contact with non-ferrous metals or galvanised surfaces. Crown Rust Remover will strip galvanising from these metal objects.
&nbsp;
Appearance: Green Liquid
&nbsp;
Surface preparation: Use a wire brush or coarse abrasive paper to remove loose rust. Remove oil and grease contamination using Crown White Spirit.
&nbsp;
Application
&nbsp;
Diluted Rust Remover: Shake the container well and pour the required amount into a plastic container. Dilute 1 part Crown Rust Remover with 9 parts water and mix thoroughly. Immerse the rusty item in the solution overnight. Remove and rinse thoroughly under running water using a wire brush to remove any residual rust. If the rust has not been completely removed repeat procedure and leave for 24 hours. Leave to dry and overcoat with a suitable finish. For heavy or stubborn rust deposits, use Crown Rust Remover without dilution
&nbsp;
Undiluted Rust Remover: Shake the container well and pour the required amount into a plastic container. Immerse the rusty item overnight or until the rust has dissolved, whichever is sooner. Rinse in clean fresh water, abrade with coarse abrasive paper and dry with a clean cloth. Leave to dry and overcoat with a suitable finish
&nbsp;
NOTE: Do not return any surplus Crown Rust Remover after use.

Crown Rust Remover 5L

Crown Paint &amp; Varnish Remover 5L
WSG-49076
Description;
Crown Paint and Varnish Remover is designed to strip old, loose and wrinkling paint and varnish. When used correctly it will remove all types of oil-based paints such as gloss and eggshell enamels, undercoats, primers etc in addition to Nitrocelloluse and a number of industrial finishes. Crown Paint and Varnish Remover can also be used on water-based paints. Its efficacy will be greatly reduced when used to remove old coatings, Stoving and 2-pack paints, where more than one coat may be required in sound condition.
&nbsp;
Crown Paint and Varnish Remover is non-inflammable, is entirely free from caustic or alkali and, when used on timber, will not injure the grain. It should, however, be used with care especially in confined spaces, and kept away from naked flames or red-hot surfaces which would cause acidic fumes, unpleasant to inhale.
&nbsp;
Crown Paint &amp; Varnish Remover is supplied in thixotropic form and can be used on paints applied to metal, wood and plaster surfaces.
&nbsp;
DIRECTIONS FOR USE
Apply the paint remover generously with an ordinary brush, avoiding unnecessary splashing of the skin or other surfaces. Leave for at least 15 minutes then remove the paint with a scraper or shave hook. When removing several coats of paint, additional applications may be necessary. The paint remover will continue to be active for a considerable time after application.
&nbsp;
After all paint has been stripped, the surface should be wiped clean with Crown White Spirit and then allowed to dry thoroughly before overcoating.
&nbsp;
IMPORTANT
Avoid contact with skin. Shake the tin well before use and open carefully, away from the face. Store in a cool place, away from light, out of reach of children and animals.

Crown Paint & Varnish Remover 5L

Crown Mordant Solution / Passivating Wash 5L
WSG-49077
Description;
A single-pack acidic wash which, when applied to new galvanized surfaces, produces a reaction which aids adhesion of subsequent paint coatings.
&nbsp;
The surfaces will blacken if the wash is functioning correctly – contaminated areas will not show any change in colour, so indicating a further application is required.
&nbsp;
Characteristics: An aqueous solution of phosphoric acid containing copper salts.
&nbsp;
Advantages: Keys galvanized surfaces, therefore enhancing adhesion of primer. Good indicator of surface cleanliness. Easy to apply by brush and is economical.
&nbsp;
Finish: Matt.
&nbsp;
Application: By brush. Do not apply by spray.
&nbsp;
Thinning: Use as supplied by brush, do not thin.
&nbsp;
Spreading Capacity: 18-20 m2/l when applied to smooth, non-porous surfaces.
&nbsp;
Drying Times: 5-15 minutes.
&nbsp;
Equipment Cleaner: Water.
&nbsp;
Colour range: A light blue solution which, when applied, creates a semi-transparent blue/black effect.
&nbsp;
Pack Sizes: 5-litre containers.
SPECIFICATIONS
&nbsp;
New, unpainted Galvanized surfaces: Degrease the surface using Crown White Spirit and allow to dry. Apply a wash coat of Crown Mordant Solution and leave for a minimum of one hour. Rinse thoroughly with clean water to remove excess acid and allow to dry.
&nbsp;
Caution: This material is acidic and is harmful to the skin. Gloves and goggles should be worn during application. In case of contact with skin or clothing, the affected parts should immediately be washed with water.

Crown Mordant Solution / Passivating Wash 5L

Crown Fungicidal Wash 5L
WSG-49078
Description;
Crown Fungicidal Wash is an aqueous solution of biocide, designed to treat mould growth and algae on decorated surfaces. When applied to previously painted walls, ceilings etc, Crown Fungicidal Wash will destroy and sterilized both the growth and the spores present on the surface.
&nbsp;
Comprehensive instructions relative to the treatment of mould growth and algae are available under the Technical Data – Defects &amp; Remedies

Crown Fungicidal Wash 5L

Crown Silicone Water Proofing Solution
WSG-49079
Description;
The transparent solution is designed for use on exterior masonry including porous surfaces. Does not prevent the wall from breathing whilst providing an effective waterproof barrier. This does not alter surface appearance. Remains effective for 5-10 years. Recommended for use on new and unpainted fair-faced concrete, cement rendering, brick, stone etc.
Characteristics: Silicone resin dispersed in solvent.
Advantages: Waterproof exterior masonry. Allows trapped moisture to escape. Does not alter surface appearance or texture. Effective for a long time.
Application: Brush or spray. Apply generously; flood the surface to cause a run down of about one-foot (300 mm). If spray applied, use the minimum pressure to prevent atomization. A mask should be worn as concentrations of the solvents on prolonged use may cause temporary dizziness or sickness if inhaled.
Thinning: Supplied ready for use.
Drying Times: Surface dry 1 hour. Re-coatable after 16 hours.
Spreading Capacity: 2-5 m2/l depending on surface texture and porosity.
Equipment Cleaner: Crown White Spirit.
Colour range: Clear.
Pack Sizes: 5 litres, 20 litres.
SPECIFICATIONS:
Prepare surface (refer application above). Ensure all surfaces are covered.
Notes:Should not be used on wood, canvas or fabrics.
Splashes on painted surfaces should be removed with a rag dipped in Crown White Spirit.

Crown Silicone Water Proofing Solution

Two Pack Epoxy Coal Tar Composition
WSG-49080
Description;
A high performance coating designed to protect steelwork from corrosion and concrete from ingress of moisture. Particularly suitable for coating the interior of water storage tanks, (must not be used on the interior of drinking water tanks) ships hulls, underwater steel structures, crude oil/sea water, blast tanks and the inside of pipes i.e. for sewerage hydroelectric stations etc. Attains maximum hardness and chemical resistance after 4 -5 days of application.
&nbsp;
Characteristics: A combination of Epoxy Resin and pitch in a two-pack form with polyamide curing agent.
&nbsp;
Advantages: Superior adhesion and water impermeability combined with excellent chemical, water and corrosion resistance. High build film with normal application.
&nbsp;
Finish: Gloss.
&nbsp;
Application: By brush or spray.
&nbsp;
Thinning &amp; Mixing: Incorporate both portions (base and catalyst) as supplied and stir thoroughly. Alternatively smaller quantities can be mixed strictly in accordance with mixing ratios indicated on the container. Allow to stand for 15-20 minutes before use.
&nbsp;
Where necessary to ease brushing and for spray application, thin to the required consistency with Crown Two-Pack Epoxy Thinners. After thinning stir thoroughly before use.
&nbsp;
Ensure that only sufficient material to use in one working day is mixed, as the â€œpot lifeâ€ of the combined material is limited to 24 hours maximum.
&nbsp;
Drying Times: Touch dry 4-6 hours. Recoatable within 24 hours in well-ventilated conditions. Do not allow the film to harden for more than 96 hours between coats to ensure good inter-coat adhesion. Full cure 4 -5days at ambient conditions.
&nbsp;
Spreading Capacity: 3-4 m2/l when applied to a smooth, non-porous surface at 100-125 microns dry film thickness, subject also to operating conditions and techniques.
&nbsp;
Equipment Cleaner: Crown Two-Pack Epoxy Thinners.
&nbsp;
Colour range: Black and Brown only.
&nbsp;
Pack Sizes: 4 litres (base and catalyst combined)
&nbsp;
SPECIFICATIONS
&nbsp;
Metal Surfaces Steelwork: Prepare surface (refer Data Sheet SP 3). Apply one liberal coat of Crown Two-Pack Zinc Rich Primer. Apply 3-4 coats of Crown Coal Tar Pitch Epoxy Composition (Two-Pack).
&nbsp;
New and Bare Concrete: Prepare surface (refer Data Sheet SP 1). Ensure surface is dry. Apply 2-3 coats of Crown Coal Tar Pitch Epoxy Composition (Two-Pack).
&nbsp;
Note:
&nbsp;
1. Allow 7 days to fully cure before filling water tanks, pools etc.
&nbsp;
2. Do not use in drinking water tanks, fishponds etc.
&nbsp;
3. Do not apply over surfaces previously painted with finishes other than epoxy.
&nbsp;
Safety Precautions: Breathing masks should be worn during application. A free flow of air should be provided when working in confined atmosphere as the vapours of this material are toxic, and may cause dizziness or sickness if inhaled in concentration.

Two Pack Epoxy Coal Tar Composition

Crown Black Bituminous 1 ltrs
WSG-49081
Description;
A black bituminous paint especially suitable for the interior coating of drinking water tanks, but may be used on general water tanks and pipework. Recommended where a protective and economical finish is required. Can be applied to most surfaces including iron and steelwork, cement renderings, brick, stone etc.
Characteristics: A heavy-duty, anti-corrosive bituminous solution.
Advantages: Economical. Non-toxic. A waterproof composition which fills minor pits, cracks and other irregularities, forming a smooth coating.
Finish: Semi-gloss.
Application: By brush.
Thinning: Use as supplied on non-porous surfaces. On porous, uncoated masonry thin to ease brushing with Crown White Spirit. Avoid over thinning. Stir well before use.
Drying Times: Surface dry: 2 hours. Recoatable: 14 hours. Hard dry several days.
Spreading Capacity: Smooth metal surfaces approximately 10-11 m2/l. Cement rendering, approximately 7-8 m2/l. The spreading capacity will be considerably reduced when applied on rough, porous surfaces.
Equipment Cleaner: Crown White Spirit.
Colour range: Black.
Pack Sizes: 1 litre, 4 litres and 20 litres.
SPECIFICATIONS
New Metal and Galvanized Drinking Water Tanks: Prepare surface (refer Data Sheet SP 3). Apply 1 coat Crown Zinc Phosphate Primer. Apply 3 coats Crown Black Bituminous Paint.
General – Purpose use on New Iron and Steelwork: Prepare surface (refer Data Sheet SP 3). Apply 1 coat (appropriate) primer. Apply 2-3 coats Crown Black Bituminous Paint.
New (dry) and unpainted Plaster, Cement rendering, Brick, Stone: Prepare surface (refer Data Sheet SP 1). Apply 3 coats Crown Black Bituminous Paint, thinning the first coat to ease brushing and improve adhesion.
Previously Painted Surfaces: Prepare surface and patch prime bare metal surface with the appropriate Crown primer. Apply 2 coats Crown Black Bituminous Paint.
Note:Coated water tanks should be flushed out with clean water before use

Crown Black Bituminous 1 ltrs

Crown Bituminous Aluminium
WSG-49082
Description;
An exterior protective coating that can be applied to metal, wood and concrete surfaces. Ideal for use on metal pipes, tanks, structural steelwork, corrugated and flat galvanized roof sheets, bitumen based roofing felt, etc. Surfaces previously painted with bitumen-based paints can be overcoated with Crown Aluminium Bituminous Paint to produce a metallic, reflective finish.
&nbsp;
Characteristics: Manufactured from a high-grade bitumen and leafing aluminium pigment, incorporated in a synthetic resin.
&nbsp;
Advantages: Durable and extremely flexible. Reasonable chemical resistance to mild fumes or spillage. Good adhesion to most surfaces. Application on storage tanks will reduce evaporation losses. Easy to apply. The incorporation of the aluminium pigment improves the UV radiation resistance of the bitumen.
&nbsp;
Finish: Metallic lustre.
&nbsp;
Application: By brush or spray.
&nbsp;
Thinning: Supplied ready for use by brush application. Thin with Crown White Spirit for spray application. Stir well before use.
&nbsp;
Drying Times: Surface dry in 3-4 hours but will remain fairly soft for a few days. Re-coatable in 16 hours.
&nbsp;
Spreading Capacity: 11-14 m2/l when applied by brush on smooth surfaces.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: Metallic Grey.
&nbsp;
Pack Sizes: 4 litres and 20 litres.
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa and Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS
&nbsp;
General Purpose Use on Iron and Steelwork: Prepare surface (refer Data Sheet SP 3). Apply 1 coat (appropriate) metal primer to new and bare surfaces. Apply 2-3 coats Crown Aluminium Bituminous Paint.
&nbsp;
Galvanized Iron Surfaces: New/unweathered G.I. should be thoroughly degreased (refer Data Sheet SP 3) and should then be coated with either Crown Etch Primer or Crown Zinc Phosphate Primer. Weathered G.I. does not require priming – normal surface preparation should be performed. Apply 2-3 coats Crown Aluminium Bituminous Paint.
&nbsp;
Plaster, Cement: Prepare surface (refer Data Sheet SP 1). New and unpainted plaster etc, should be coated with 1 coat Crown Alkali-Resisting Primer ensuring that the surface is dry. Apply 2-3 coats Crown Aluminium Bituminous Paint.

Crown Bituminous Aluminium

Crown Heat Resisting Aluminium (up to 200 C) 4 ltr
WSG-49083
Description;
A single pack, high temperature coating formulated with a leafing aluminum pigment and silicone vehicle that withstands temperatures up to 220°C. Widely used on steelwork which requires paint with good heat resistance; un-insulated chimney stacks, retorts, exhausts, jet engines, boiler fronts, kilns, high pressure steam lines, furnaces, boilers, kilns, metal fireplaces, grills and other hot metal surfaces requiring a heat resistant protective coating. It forms a super durable porcelain-like bond on surfaces at high temperatures and offers excellent resistance to gasoline, rust, salt spray, oil, grease and humidity. The heat resistant properties of this material only develop after heating to 200°C.
&nbsp;
Characteristics: Leafing aluminium pigment in a special synthetic medium.
&nbsp;
Advantages: Durable. Dries to a brilliant, glossy, silver finish. Tough cured finish resists oil, gas, grease, rust, salt, humidity and solvents. Good adhesion, flexibility and reflectivity. Good corrosion and heat resistance. Will not blister, flake, crack or peel at temperatures up to 220°C. Lead and chromate free.
&nbsp;
Limitations: May only be overcoated by itself.
&nbsp;
Finish: Metallic Silver
&nbsp;
Application: Apply by brush, roller, conventional or airless spray. Roller application may require special care to prevent bubbling and more than one coat to obtain proper film thickness. Two coats recommended for best results.
&nbsp;
Thinning: Supplied ready for use for brush application on normal surfaces. For spray application thin with Crown Industrial Thinner. Stir well before use.
&nbsp;
Drying Times: Recoatable in 16 hours.
&nbsp;
Spreading Capacity: 8 – 10 m2/l when applied on a smooth, non-porous surface.
&nbsp;
Heat resistance: Up to 220°C.
Equipment Cleaner: Crown Industrial Thinner
Colour range: Silver.
Pack Sizes: 4 litres and 20 litres.
Specifications:
New Surfaces i.e. Steelwork, Galvanized Iron: Prepare surface (refer appropriate surface preparation Data Sheet). Apply 2 coats of Crown Aluminium Heat Resistant Paint.
Previously Painted Surfaces: Prepare surface (refer appropriate surface preparation Data Sheet). Apply 1-2 coats Crown Aluminium Heat Resistant Paint.

Crown Heat Resisting Aluminium (up to 200 C) 4 ltr

Crown Aluminium (Leafing) Paint
WSG-49084
Description;
Designed for exterior and interior use on iron and steelwork. Provides good resistance to heat, damp conditions and salt water. Crown Aluminium Paint possesses excellent heat reflecting properties and will considerably reduce evaporation losses when used on storage tanks. In tropical climates, corrugated iron and metal roofs on houses, factories, stores, etc, can be coated with Crown Aluminium Paint to reduce the interior temperature.
Characteristics: Leaf Aluminium pigment in a special synthetic medium.
Advantages: Good heat resistance. Excellent protective, obliterating and spreading powers. Easy to apply.
Finish: Metallic lustre.
Application: Brush or spray.
Thinning: Supplied ready for use for brush application on normal surfaces. For spray application thin with Crown White Spirit. Stir well before use.
Drying Times: Recoatable in 16 hours.
Spreading Capacity: 15-18 m2/l when applied on a smooth, non-porous surface.
Heat resistance: Up to 150°C.
Equipment Cleaner: Crown White Spirit.
Colour range: Silver.
Pack Sizes: ½ litre, 1 litre, 4 litres and 20 litres.
Specifications
New Surfaces i.e. Steelwork, Galvanized Iron: Prepare surface (refer appropriate surface preparation Data Sheet). Apply 1 coat (appropriate) primer. Apply 2 coats of Crown Aluminium Paint.
Previously Painted Surfaces: Prepare surface (refer appropriate surface preparation Data Sheet). Patch prime bare surfaces only with the appropriate primer. Apply 1-2 coats Crown Aluminium Paint.
Hot Metal Surfaces 150°C: Prepare surface (refer Data Sheet SP 3). Apply 2-3 coats Crown Aluminium Paint (omitting primer).
&nbsp;

Crown Aluminium (Leafing) Paint

Crown Two Pack Epoxy Enamel Clear 1 ltrs
WSG-49085
Description;
A high-performance coating supplied in a two-pack form offering maximum resistance against abrasion, chemical attack and water penetration. Recommended for INTERIOR use on prepared metal (primed), wood and plaster/concrete surfaces in chemical plants, laboratories, hospitals, dairies, breweries, food factories, bottling plants etc, and for general use in high traffic areas in public buildings. An ideal industrial finish for coating wooden and metal furniture, machinery and other manufactured items.
&nbsp;
Do not apply over surfaces previously painted with oil paints i.e. gloss, eggshell etc.
&nbsp;
The Two-Pack Enamel, which is mixed shortly before use with the catalyst/hardener, does not attain maximum hardness and chemical resistance until 3 -4 days after application (at a temperature of 22Â°C).
&nbsp;
Characteristics: Manufactured from high quality pigments finely ground in a combination of epoxy resins. Poor exterior durability â€“ tends to chalk badly on exposure.
&nbsp;
Advantages: High gloss, abrasion, chemical and solvent resistant finish. Resistant to mild acids, alkalis and water.
&nbsp;
Finish: High Gloss.
&nbsp;
Application: By brush, roller or spray. (When applying by spray facemasks must be worn).
&nbsp;
Thinning &amp; Mixing: The two components (base and catalyst) must be mixed together to produce 4 litres of material – alternatively smaller quantities can be mixed strictly in accordance with the mixing ratios indicated on the container (the mixing ratios vary slightly depending on the colour in use).
&nbsp;
Stir well and allow to stand for 15-20 minutes before use. Ensure that only sufficient material to use in one working day is mixed, as the pot-life of the combined mixture is limited to approximately 12 hours.
&nbsp;
The mixed material will require to be thinned with Crown Two Pack Epoxy Thinners for spray application and for first coat work on porous surfaces, particularly on concrete and plaster.
&nbsp;
Drying Times: Surface dry 2-3 hours. Hard dry/re-coatable in 16 hours. Do not leave longer than 96 hours between coats to avoid adhesion problems. Film attains maximum resistance and hardness after approximately 4 -5days.
&nbsp;
Spreading Capacity: 10-11 m2/l when applied to smooth, non-porous surfaces.
&nbsp;
Equipment Cleaner: Crown Two-Pack Epoxy Thinners.
&nbsp;
Colour range: White (ex-stock). Other shades, chosen from the BS 4800 colour card, supplied on demand.
&nbsp;
Pack Sizes: 4 litres (base and catalyst combined)

Crown Two Pack Epoxy Enamel Clear 1 ltrs

Crown Chlorinated Rubber Paint White 4ltrs
WSG-49086
Description;
Crown Chlorinated Rubber Paint White 4ltrs

Crown Chlorinated Rubber Paint White 4ltrs

Crown Acrylic Tennis Court Paint
WSG-49087
Description;
Designed especially for use on concrete floor screeds on areas to be used for tennis and badminton courts, basketball, gymnastics etc.
&nbsp;
Characteristics: Manufactured from a high quality copolymer emulsion incorporating carefully selected pigments.
&nbsp;
Advantages: Can be applied to new (dry) screeds. Creates desired colour effect. Matt finish provides good foot grip. For interior and exterior use.
&nbsp;
Finish: Matt.
&nbsp;
Application: Brush application is recommended. Brush the first coat well into the surface to guarantee good adhesion.
&nbsp;
Thinning: The 1st coat should be thinned with clean water to ease brushing and to aid penetration into the floor screeds. Subsequent coats can be thinned if necessary with a little clean water. Avoid overthinning. Stir well before use.
&nbsp;
Drying Times: Re-coatable in 4 hours.
&nbsp;
Spreading capacity:When applied on good wood float floor screeds Crown Tennis Court Paint will cover 8-10 m2/l. When applied to a Tarmacadam surface the spreading capacity will be considerably reduced – approximately 5m2/l.
&nbsp;
Equipment Cleaner: Water.
&nbsp;
Colour range: Supplied in special Tennis Court Green for the playing surface. Also available in Copper for use on concrete areas surrounding the playing area. Line markings can be painted in Crown Road Marking Paint.
&nbsp;
Pack Sizes: 4 litres and 20 litres.

Crown Acrylic Tennis Court Paint

Crown Squash Court Paint
WSG-49089
Description;
High-quality and extremely hardwearing oil based finish specially designed for use on squash courts. Crown Squash paint has a satin finish designed to restrict glare and is suitable for application on all playing surfaces.
&nbsp;
Unlike the emulsion paints and Chlorinated Rubber paint, which are highly thermoplastic and tend to hold the ball, thereby slowing the game, Crown Squash Court paint conforms to the requirements of the British Squash Rackets Association.
&nbsp;
Characteristics: High-quality oil paint based on a special alkyd resin medium and superior pigments.
&nbsp;
Advantages: A durable smooth, satin finish. Resists dirt and is easily cleaned. Does not affect ball bounce.
&nbsp;
Finish: Low sheen
&nbsp;
Application: By roller, spray or brush.
&nbsp;
Thinning: If necessary thin with a little Crown White Spirit to ease application. Thin to the required viscosity for spray application. Stir well before use.
&nbsp;
Drying Times: Re-coatable in 16 hours.
&nbsp;
Spreading Capacity: 12-14 m2/l. 9-10 litres of paint should be sufficient to cover the playing surface, measuring approx. 120 square metres.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: Off-White.
&nbsp;
Pack Sizes: 1 litre, 4 litres.

Crown Squash Court Paint

School Board Paint – Green And Black
WSG-49089
Description:
Designed for use on school boards and wrought ironwork but may be used on a variety of other surfaces where a dense matt black finish is required.
&nbsp;
Characteristics: High-quality pigments ground in an alkyd medium.
&nbsp;
Advantages: Excellent covering capacity. Provides a good grip for chalk. Attractive matt finish.
&nbsp;
Finish: Matt.
&nbsp;
Application: By brush, roller or spray.
&nbsp;
Thinning: Where necessary and for spray application thin with Crown White Spirit. Stir well before use.
&nbsp;
Drying Times: Re-coatable in 16 hours.
&nbsp;
Spreading Capacity: 13-15 m2/l when applied to smooth, non-porous surfaces.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: Black and Green.
&nbsp;
Pack Sizes: ½ litre, 1 litre, 4 litres.
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, and Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS
&nbsp;
New Metal Surfaces: Prepare surface (refer Data Sheet SP 3). Apply 1 coat appropriate metal primer. Apply 2 coats Crown School board Paint.
&nbsp;
New Wood Surfaces: Prepare surface (refer Data Sheet SP 4). Apply 1 coat Crown Wood Primer. Apply 2 coats Crown Schoolboard Paint.
&nbsp;
Previously Painted Surfaces: Wash the school board surface with detergent solution, wipe clean and allow to dry. Lightly abrade. Apply 2 coats Crown Schoolboard Paint.

School Board Paint – Green And Black

Crown GP Matt Finish – Black ( Wrought Iron
WSG-49090
Description;
Crown GP Matt Finish – Black ( Wrought Iron)

Crown GP Matt Finish – Black ( Wrought Iron

Crown Stronghold Parquet Adhesive-2530 20 kgs
WSG-49091
Description;
Crown Stronghold Parquet Adhesive-2530 20 kgs

Crown Stronghold Parquet Adhesive-2530 20 kgs

Crown Paint Stronghold Tile Adhesive – 4 Litres
WSG-49092
Description;
Crown Paint Stronghold Tile Adhesive is a high-quality P.V.A adhesive designed to bond glazed, ceramic and vinyl asbestos tiles to wall and floor areas. Can also be used for fixing expanded polystyrene ceiling tiles. Note: Not recommended for use with pure vinyl floor tiles.
&nbsp;
Characteristics of Crown Paint Stronghold Tile Adhesive: A unique formulation incorporating polyvinyl acetate as the binder that imparts the high adhering properties of the product.
&nbsp;
Advantages of Crown Paint Stronghold Tile Adhesive: Attractive appearance, quick-drying, high bonding power, easily cleaned with water as the solvent.
&nbsp;
Appearance: White viscous gel or suspension.
&nbsp;
Application of Crown Paint Stronghold Tile Adhesive: Use a comb trowel.

Crown Paint Stronghold Tile Adhesive – 4 Litres

Crown Stronghold Wood Adhesive-2502 20 kgs
WSG-49093
Description;
Crown Stronghold Wood Adhesive-2502 20 kgs

Crown Stronghold Wood Adhesive-2502 20 kgs

Crown Duco Body Filler 
WSG-49094
Description;
CROWN DUCO BODY FILLER is a special repair and dent filling Polyester Putty, fast drying with excellent adhesion and good sanding properties.
&nbsp;
Duco Light Weight Bodyfiller KIT (Bodyfiller 1Kg +Hardner 20 Grms + Spatula)
&nbsp;
Typical Uses:
&nbsp;
It is specially developed for filling deep scratches and small craters or surface imperfections on metal surfaces. Ideal for Auto-refinishing, used as a repair and dent filler for automobiles and even for levelling of wooden surfaces.
&nbsp;
Type: 2 PACK POLYESTER BASED
&nbsp;
Colour: Light Grey in colour. ( TURNS LIGHT PINK AFTER ADDITION OF CATALYST)
&nbsp;
Finish: Matt
&nbsp;
Get CROWN DUCO BODY FILLER in Nairobi, Kenya from Rangi Paint Store.
You can also enquire for all crown paints prices in nairobi, kenya from Rangi Paint Store.
&nbsp;
Crown Duco Body Filler &#8211; 5 kgs quantity
1
Add to cart
Category: Automotive Tags: Crown Duco Body Filler, Crown Duco Body Filler in nairobi kenya, crown paint, Duco Body Filler
Description

Crown Duco Body Filler

Crown vesta economy skim coat 25kg
WSG-49095
Description;
Crown vesta economy skim coat 25kg

Crown vesta economy skim coat 25kg

Crown gypsum filler 25kg
WSG-49096
Description;
Crown gypsum filler 25kg
&nbsp;

Crown gypsum filler 25kg

Crown Wallplast level putty 25kg
WSG-49097
Description;
Crown Wallplast level putty 25kgs

Crown Wallplast level putty 25kgs

Crown Wallplast Cement Putty 25KG
WSG-49098
Description;
Wallplast Cement Putty USP
&nbsp;
Excellent workability
Ease of use at site
Interior and Exterior Use
Breathable – can be used even if walls still have some moisture
Cement-based hence better compatibility and good adhesion with cement plaster

Crown Wallplast Cement Putty 25KG

Crown Wall Care Putty 30 kgs
WSG-49099
Description;
Crown Wall Care Putty 30 kgs

Crown Wall Care Putty 30 kgs

Crown OK Putty 25 kgs
WSG-49100
Description;
multipurpose putty formulated for the glazing of wooden and metal window frames with single glass. Designed for use in bedding and external fronting single glass into primed softwood and hardwood frames which will subsequently be painted. Can also be used to glaze single glass into concrete or stone surrounds after prior sealing with an appropriate sealer.
&nbsp;
Advantages: Easy to apply and economical.
&nbsp;
Limitations: Not suitable for internal fronting or when the frame is to be stained. Do not use on sealed units.
&nbsp;
Finish: Matt.
&nbsp;
Application: By palette knife or blade.
&nbsp;
Thinning: Do not thin.
&nbsp;
Spreading Capacity: 1 Kg will glaze approximately 4 linear metres of glass.
&nbsp;
Drying Times: Skin forms after approx. 2-4 days outdoors dependant on ambient temperature and humidity. May take up to 2 months to fully cure subject to temperature.
&nbsp;
Equipment Cleaner: Crown White Spirits.
&nbsp;
Colour: Grey
&nbsp;
Pack Sizes:
&nbsp;
1 kg packed 24 x 1kg boxes
2 kg packed 12 x 2kg boxes
8 kg packed in singles
25 kg packed in singles
40 kg packed in singles

Crown OK Putty 25 kgs

Crown Metal Putty 40kg
WSG-49101
Description;
Availability: From Crown Depots in Nairobi, Mombasa and Kisumu or through Crown Stockists.
&nbsp;
Surface Preparation: Remove all dust, grease and lose material from the rebate. Any moisture on the timber should be wiped off using a clean paper towel or other absorbent material to give a dry surface.
&nbsp;
Application: Check the condition of the primer or stain on softwood timber frames, especially the rebate and glazing surface of the beads. Any section which has been partially missed or is considerably weathered should be reprimed before glazing. Rebates of hardwood frames which are to be protected with clear varnish should be sealed with a sealer. Location blocks should be used inside hung opening windows to hold the glass in place.
&nbsp;
When using as back bedding, apply to rebate. Push in glass and leave a thickness of 1.5mm by 2mm so as to achieve sufficient load bearing properties. The maximum fillet size to allow correct setting is 15mm high x 25mm wide. Do not reduce the fillet size below 8mm high x 10mm wide.
&nbsp;
Finishing: The putty must be painted as soon as it has formed a skin firm enough to accept the actions of overcoating. Apply the first coat usually within 7 – 21 days. The final coat should be applied within 28days.
&nbsp;
Health &amp; Safety: Keep out of the reach of children. Wash hands after use. Safety data sheet available for professional user on request. Dispose of empty packaging in accordance with regulations.

Crown Metal Putty 40kg

Crown Metal Putty 25kg
WSG-49102
Description;
Application: Check the condition of the primer or stain on softwood timber frames, especially the rebate and glazing surface of the beads. Any section which has been partially missed or is considerably weathered should be reprimed before glazing. Rebates of hardwood frames which are to be protected with clear varnish should be sealed with a sealer. Location blocks should be used inside hung opening windows to hold the glass in place.
&nbsp;
When using as back bedding, apply to rebate. Push in glass and leave a thickness of 1.5mm by 2mm so as to achieve sufficient load bearing properties. The maximum fillet size to allow correct setting is 15mm high x 25mm wide. Do not reduce the fillet size below 8mm high x 10mm wide.
&nbsp;
Finishing: The putty must be painted as soon as it has formed a skin firm enough to accept the actions of overcoating. Apply the first coat usually within 7 – 21 days. The final coat should be applied within 28days.

Crown Metal Putty 25kg

Crown Metal Putty 8kg
WSG-49103
Description;
Easy to apply and economical.
&nbsp;
Limitations: Not suitable for internal fronting or when the frame is to be stained. Do not use on sealed units.
&nbsp;
Finish: Matt.
&nbsp;
Application: By palette knife or blade.
&nbsp;
Thinning: Do not thin.
&nbsp;
Spreading Capacity: 1 Kg will glaze approximately 4 linear metres of glass.
&nbsp;
Drying Times: Skin forms after approx. 2-4 days outdoors dependant on ambient temperature and humidity. May take up to 2 months to fully cure subject to temperature.
&nbsp;
Equipment Cleaner: Crown White Spirits.
&nbsp;
Colour: Grey
&nbsp;
Pack Sizes:
&nbsp;
1 kg packed 24 x 1kg boxes
2 kg packed 12 x 2kg boxes
8 kg packed in singles
25 kg packed in singles
40 kg packed in singles

Crown Metal Putty 8kg

Crown Metal Putty 2kg
WSG-49104
Description;
Advantages: Easy to apply and economical.
&nbsp;
Limitations: Not suitable for internal fronting or when the frame is to be stained. Do not use on sealed units.
&nbsp;
Finish: Matt.
&nbsp;
Application: By palette knife or blade.
&nbsp;
Thinning: Do not thin.
&nbsp;
Spreading Capacity: 1 Kg will glaze approximately 4 linear metres of glass.
&nbsp;
Drying Times: Skin forms after approx. 2-4 days outdoors dependant on ambient temperature and humidity. May take up to 2 months to fully cure subject to temperature.
&nbsp;
Equipment Cleaner: Crown White Spirits.
&nbsp;
Colour: Grey
&nbsp;
Pack Sizes:
&nbsp;
1 kg packed 24 x 1kg boxes
2 kg packed 12 x 2kg boxes
8 kg packed in singles
25 kg packed in singles
40 kg packed in singles
Availability: From Crown Depots in Nairobi, Mombasa and Kisumu or through Crown Stockists.
&nbsp;
Surface Preparation: Remove all dust, grease and lose material from the rebate. Any moisture on the timber should be wiped off using a clean paper towel or other absorbent material to give a dry surface.
&nbsp;
Application: Check the condition of the primer or stain on softwood timber frames, especially the rebate and glazing surface of the beads. Any section which has been partially missed or is considerably weathered should be reprimed before glazing. Rebates of hardwood frames which are to be protected with clear varnish should be sealed with a sealer. Location blocks should be used inside hung opening windows to hold the glass in place.
&nbsp;
When using as back bedding, apply to rebate. Push in glass and leave a thickness of 1.5mm by 2mm so as to achieve sufficient load bearing properties. The maximum fillet size to allow correct setting is 15mm high x 25mm wide. Do not reduce the fillet size below 8mm high x 10mm wide.
&nbsp;
Finishing: The putty must be painted as soon as it has formed a skin firm enough to accept the actions of overcoating. Apply the first coat usually within 7 – 21 days. The final coat should be applied within 28days.

Crown Metal Putty 2kg

Crown Metal Putty 1kg
WSG-49105
Description;
A multipurpose putty formulated for the glazing of wooden and metal window frames with single glass. Designed for use in bedding and external fronting single glass into primed softwood and hardwood frames which will subsequently be painted. Can also be used to glaze single glass into concrete or stone surrounds after prior sealing with an appropriate sealer.
&nbsp;
Advantages: Easy to apply and economical.
&nbsp;
Limitations: Not suitable for internal fronting or when the frame is to be stained. Do not use on sealed units.
&nbsp;
Finish: Matt.
&nbsp;
Application: By palette knife or blade.
&nbsp;
Thinning: Do not thin.
&nbsp;
Spreading Capacity: 1 Kg will glaze approximately 4 linear metres of glass.
&nbsp;
Drying Times: Skin forms after approx. 2-4 days outdoors dependant on ambient temperature and humidity. May take up to 2 months to fully cure subject to temperature.
&nbsp;
Equipment Cleaner: Crown White Spirits.
&nbsp;
Colour: Grey
&nbsp;
Pack Sizes:
&nbsp;
1 kg packed 24 x 1kg boxes
2 kg packed 12 x 2kg boxes
8 kg packed in singles
25 kg packed in singles
40 kg packed in singles
Availability: From Crown Depots in Nairobi, Mombasa and Kisumu or through Crown Stockists.
&nbsp;
Surface Preparation: Remove all dust, grease and lose material from the rebate. Any moisture on the timber should be wiped off using a clean paper towel or other absorbent material to give a dry surface.
&nbsp;
Application: Check the condition of the primer or stain on softwood timber frames, especially the rebate and glazing surface of the beads. Any section which has been partially missed or is considerably weathered should be reprimed before glazing. Rebates of hardwood frames which are to be protected with clear varnish should be sealed with a sealer. Location blocks should be used inside hung opening windows to hold the glass in place.
&nbsp;
When using as back bedding, apply to rebate. Push in glass and leave a thickness of 1.5mm by 2mm so as to achieve sufficient load bearing properties. The maximum fillet size to allow correct setting is 15mm high x 25mm wide. Do not reduce the fillet size below 8mm high x 10mm wide.
&nbsp;
Finishing: The putty must be painted as soon as it has formed a skin firm enough to accept the actions of overcoating. Apply the first coat usually within 7 – 21 days. The final coat should be applied within 28days.

Crown Metal Putty 1kg

Crown vesta economy skim coat 25kg
WSG-49106
Description;
Crown vesta economy skim coat 25kg

Crown Polyfilla 2.5 kg
WSG-49107
Description;
Plaster Work: For cracks in plaster, joints in plaster boards, cracks between plaster and woodwork, making good round pipes etc. When dry, Polyfilla will take nails or screws without breaking away under light loads and can be used to plug walls for lightweight domestic fixtures. Polyfilla is ideal for use where there is vibration. Due to its unique formulation, it will withstand normal contraction and expansion of the wall surface and will not crack or fall out.
&nbsp;
Woodwork: For filling cracks in woodwork and defective paintwork, between floorboards, for filling joints, not holes, screw holes, cut-outs of removed locks, handles etc.
&nbsp;
Interior Brick &amp; Cement Work: For filling interior brick work, for smoothing rough cement work without need for keying, for Leveling up walls for tiling, for skimming expanded Polystyrene and asbestos for easy painting.
&nbsp;
Special uses: Polyfilla can be used as plaster texture paint. It can be used as a filler/adhesive for fixing mineral fibre acoustic tiles to ceilings and spot fixing plaster board panels to walls. Mixed with mineral wool, Polyfilla can be used for pipe lagging in awkward places. It is also ideal for repairing plaster ceilings mouldings. Polyfilla is an excellent modeling material, suitable for use by artists and sculptors and is widely used in schools and art colleges etc.
&nbsp;
Exterior Woodwork: Where Polyfilla is required to be used on exterior surfaces or on areas liable to come into contact with water – i.e. behind sinks, baths, etc. it can be used to make up Swedish Putty™. Add a minimum of 10% gloss paint to a stiff Polyfilla paste and mix well. On wood Polyfilla should be applied directly to the bare, sound, dry wood and not over the primer. Other surfaces should be dry and impervious to water. When dry the Polyfilla and all porous surfaces around it must be protected from water by the sound oil paint or varnish system. Otherwise excessive wood movement and deterioration may occur. Exterior brick work, plaster etc, is best repaired with a sand/cement mixture (preferably with the addition of a P.V.A. bonding agent) or filled with a proprietary exterior filler/sealant.
&nbsp;
Mixing: Polyfilla is extremely easy to mix by adding approximately two volumes of Polyfilla to one of water and mixing thoroughly. A slightly stiffer mix can be used when filling deep cracks and holes and on very absorbent surfaces. For wood grain filling a little more water can be added to produce a creamy consistency, which can be brushed on. For filling cracks on walls, prior to the application of emulsion paint, Polyfilla can be thinned with the paint – this will assist obliteration by the paint. Nail heads, unless of a non-rusting nature, should be primed with a metal primer or oil paint before applying Polyfilla.
&nbsp;
FILLING
&nbsp;
Cracks and cavities do not require being wet or primed before filling. Simply brush out any loose dust, old paint or other contamination and press in the Polyfilla paste firmly with a filing knife (slightly round of the surface) and smooth off. Deep cracks are best filled in stages to enhance hardening. The filled area, once dry, should be sandpapered with fine abrasive paper ready for painting.
&nbsp;
Avoid the use of low-quality filling materials
&nbsp;
The use of Plaster of Paris or low-quality fillers should be avoided, as these products are likely to crack and fall out. In particular, these types of materials are extremely powdery, therefore offering inferior bonding characteristics to the substrate combined with poor adhesion to the paint finish.

Crown Polyfilla 2.5 kg

Crown Polyfilla 0.5kg
WSG-49108
Description;
Plaster Work: For cracks in plaster, joints in plaster boards, cracks between plaster and woodwork, making good round pipes etc. When dry, Polyfilla will take nails or screws without breaking away under light loads and can be used to plug walls for lightweight domestic fixtures. Polyfilla is ideal for use where there is vibration. Due to its unique formulation, it will withstand normal contraction and expansion of the wall surface and will not crack or fall out.
&nbsp;
Woodwork: For filling cracks in woodwork and defective paintwork, between floorboards, for filling joints, not holes, screw holes, cut-outs of removed locks, handles etc.
&nbsp;
Interior Brick &amp; Cement Work: For filling interior brick work, for smoothing rough cement work without need for keying, for Leveling up walls for tiling, for skimming expanded Polystyrene and asbestos for easy painting.
&nbsp;
Special uses: Polyfilla can be used as plaster texture paint. It can be used as a filler/adhesive for fixing mineral fibre acoustic tiles to ceilings and spot fixing plaster board panels to walls. Mixed with mineral wool, Polyfilla can be used for pipe lagging in awkward places. It is also ideal for repairing plaster ceilings mouldings. Polyfilla is an excellent modeling material, suitable for use by artists and sculptors and is widely used in schools and art colleges etc.
&nbsp;
Exterior Woodwork: Where Polyfilla is required to be used on exterior surfaces or on areas liable to come into contact with water – i.e. behind sinks, baths, etc. it can be used to make up Swedish Putty™. Add a minimum of 10% gloss paint to a stiff Polyfilla paste and mix well. On wood Polyfilla should be applied directly to the bare, sound, dry wood and not over the primer. Other surfaces should be dry and impervious to water. When dry the Polyfilla and all porous surfaces around it must be protected from water by the sound oil paint or varnish system. Otherwise excessive wood movement and deterioration may occur. Exterior brick work, plaster etc, is best repaired with a sand/cement mixture (preferably with the addition of a P.V.A. bonding agent) or filled with a proprietary exterior filler/sealant.
&nbsp;
Mixing: Polyfilla is extremely easy to mix by adding approximately two volumes of Polyfilla to one of water and mixing thoroughly. A slightly stiffer mix can be used when filling deep cracks and holes and on very absorbent surfaces. For wood grain filling a little more water can be added to produce a creamy consistency, which can be brushed on. For filling cracks on walls, prior to the application of emulsion paint, Polyfilla can be thinned with the paint – this will assist obliteration by the paint. Nail heads, unless of a non-rusting nature, should be primed with a metal primer or oil paint before applying Polyfilla.
&nbsp;
FILLING
&nbsp;
Cracks and cavities do not require being wet or primed before filling. Simply brush out any loose dust, old paint or other contamination and press in the Polyfilla paste firmly with a filing knife (slightly round of the surface) and smooth off. Deep cracks are best filled in stages to enhance hardening. The filled area, once dry, should be sandpapered with fine abrasive paper ready for painting.
&nbsp;
Avoid the use of low-quality filling materials
&nbsp;
The use of Plaster of Paris or low-quality fillers should be avoided, as these products are likely to crack and fall out. In particular, these types of materials are extremely powdery, therefore offering inferior bonding characteristics to the substrate combined with poor adhesion to the paint finish.

Crown Polyfilla0.5kg

Crown Two-Pack Epoxy Zinc Phosphate4L
WSG-49109
Description;
superior quality lead free corrosion-resistant primer with excellent adhesion on a variety of properly prepared surfaces. 2 Pack Epoxy Zinc Phosphate Primer improves adhesion of topcoats and resists moisture damage caused by water permeation. Suitable for use under Chlorinated Rubber and 2 Pack Epoxy finishes.
&nbsp;
Characteristics: A Two-Pack Primer based on epoxy resin pigmented with Zinc Phosphate anti-corrosive pigment.
&nbsp;
Advantages: Quick Drying. Excellent adhesion and corrosion resistance. Exceptional top coat hold-out.
&nbsp;
Finish: Semi -matt
&nbsp;
Application: Brush, roller, conventional or airless spray.
&nbsp;
Thinning &amp; Mixing: Prior to use, mix 3 parts base to 1 part curing agent by volume, stirring thoroughly. Can be thinned with Crown Two-Pack Epoxy Thinner if necessary to ease brushing and for spray application. Allow the mixed material to stand for 15 minutes prior to use.
&nbsp;
IMPORTANT: As the pot-life of the mixed material is limited. Do not mix more than can be used during the working day.
&nbsp;
Drying Times: Surface dry: 2hours. Recoatable: 14 hours in dry well-ventilated conditions.
&nbsp;
Spreading Capacity: 10 -12 m2 at 30 – 40 µm DFT, subject to surface profile, operating conditions and application techniques.
&nbsp;
Equipment Cleaner: Crown Two-Pack Epoxy Thinners.
&nbsp;
Colour range: Light Grey

Crown Two-Pack Epoxy Zinc Phosphate4L

Crown Two-Pack Epoxy Zinc Phosphate 1L
WSG-49110
Description;
superior quality lead free corrosion-resistant primer with excellent adhesion on a variety of properly prepared surfaces. 2 Pack Epoxy Zinc Phosphate Primer improves adhesion of topcoats and resists moisture damage caused by water permeation. Suitable for use under Chlorinated Rubber and 2 Pack Epoxy finishes.
&nbsp;
Characteristics: A Two-Pack Primer based on epoxy resin pigmented with Zinc Phosphate anti-corrosive pigment.
&nbsp;
Advantages: Quick Drying. Excellent adhesion and corrosion resistance. Exceptional top coat hold-out.
&nbsp;
Finish: Semi -matt
&nbsp;
Application: Brush, roller, conventional or airless spray.
&nbsp;
Thinning &amp; Mixing: Prior to use, mix 3 parts base to 1 part curing agent by volume, stirring thoroughly. Can be thinned with Crown Two-Pack Epoxy Thinner if necessary to ease brushing and for spray application. Allow the mixed material to stand for 15 minutes prior to use.
&nbsp;
IMPORTANT: As the pot-life of the mixed material is limited. Do not mix more than can be used during the working day.
&nbsp;
Drying Times: Surface dry: 2hours. Recoatable: 14 hours in dry well-ventilated conditions.
&nbsp;
Spreading Capacity: 10 -12 m2 at 30 – 40 µm DFT, subject to surface profile, operating conditions and application techniques.
&nbsp;
Equipment Cleaner: Crown Two-Pack Epoxy Thinners.
&nbsp;
Colour range: Light Grey

Crown Two-Pack Epoxy Zinc Phosphate 1L

Crown Zinc Phosphate Primer – Grey 1 lts
WSG-49111
Description;
Crown Zinc Phosphate Primer – Grey 1 lts

Crown Zinc Phosphate Primer – Grey 1 lts

Red Oxide (Pre-Fab) Primer Matt Finish 1L
WSG-49112
Description;
An economical primer/surfacer specifically designed for workshop/Industrial use on steelwork, commercial vehicle bodies, machinery, metal casement windows etc. This is shop primer produces a matt finish, sometimes preferred when a period of weeks/months is likely to elapse before overcoating. If overcoating is to take place more or less immediately, the use of a matt primer Zinc Chromate Primer is recommended. For maximum protection of exposed steelwork, particularly in coastal regions, the use of Crown Zinc Phosphate Primer is recommended
&nbsp;
Characteristics: A special synthetic medium pigmented with red oxide pigments.
&nbsp;
Advantages: Economical, good opacity and suitable for spray application.
&nbsp;
Finish: Matt
&nbsp;
Application: By brush, roller or spray
&nbsp;
Thinning: Supplied ready for use for brush application on smooth surfaces but where necessary, and for spray application, thin with Crown White Spirit. Overthinning will affect opacity. Stir well before use.
&nbsp;
Drying times: Recoatable after 16 hours.
&nbsp;
Spreading capacity: 12-16 m2/l when applied by brush on a smooth surface.
&nbsp;
Equipment cleaner: Clean all equipment immediately after use with Crown White Spirit
&nbsp;
Colour range: Red Oxide
&nbsp;
Pack sizes: 4 litres
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa and Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS:
&nbsp;
New Iron and Steel Work: Prepare surface (refer SP 3). Apply 1 coat of Crown Red Oxide Matt Primer
&nbsp;
Previously painted surfaces: Prepare surface and patch prime bare metal surface areas with 1 coat Crown Red Oxide Matt Primer.

Red Oxide (Pre-Fab) Primer Matt Finish 1L

Red Oxide (Pre-Fab) Primer Matt Finish 4L
WSG-49113
Description;
An economical primer/surfacer specifically designed for workshop/Industrial use on steelwork, commercial vehicle bodies, machinery, metal casement windows etc. This is shop primer produces a matt finish, sometimes preferred when a period of weeks/months is likely to elapse before overcoating. If overcoating is to take place more or less immediately, the use of a matt primer Zinc Chromate Primer is recommended. For maximum protection of exposed steelwork, particularly in coastal regions, the use of Crown Zinc Phosphate Primer is recommended
&nbsp;
Characteristics: A special synthetic medium pigmented with red oxide pigments.
&nbsp;
Advantages: Economical, good opacity and suitable for spray application.
&nbsp;
Finish: Matt
&nbsp;
Application: By brush, roller or spray
&nbsp;
Thinning: Supplied ready for use for brush application on smooth surfaces but where necessary, and for spray application, thin with Crown White Spirit. Overthinning will affect opacity. Stir well before use.
&nbsp;
Drying times: Recoatable after 16 hours.
&nbsp;
Spreading capacity: 12-16 m2/l when applied by brush on a smooth surface.
&nbsp;
Equipment cleaner: Clean all equipment immediately after use with Crown White Spirit
&nbsp;
Colour range: Red Oxide
&nbsp;
Pack sizes: 4 litres
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa and Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS:
&nbsp;
New Iron and Steel Work: Prepare surface (refer SP 3). Apply 1 coat of Crown Red Oxide Matt Primer
&nbsp;
Previously painted surfaces: Prepare surface and patch prime bare metal surface areas with 1 coat Crown Red Oxide Matt Primer.

Red Oxide (Pre-Fab) Primer Matt Finish 4L

Red Oxide (Pre-Fab) Primer/Finish Glossy 1L
WSG-49114
Description;
An economical primer/surfacer specifically designed for workshop/industrial use on steelwork, commercial vehicle bodies, machinery, metal casement windows etc. This shop primer produces a gloss finish, sometimes preferred when a period of weeks/months is likely to elapse before overcoating. If overcoating is to take place more or less immediately, the use of a matt primer i.e. Crown Red Oxide/Zinc Chromate Primer is recommended. For maximum protection of exposed steelwork, particularly in coastal regions, the use of Crown Zinc Phosphate Primer is recommended.
&nbsp;
Characteristics: A special synthetic medium pigmented with red oxide pigments.
&nbsp;
Advantages: Economical, good corrosion resistance and good adhesion properties.
&nbsp;
Finish: Glossy
&nbsp;
Application: By brush, roller or spray
&nbsp;
Thinning: Supplied ready for use for brush application on smooth surfaces but where necessary, and for spray application, thin with Crown White Spirit. Over thinning will affect opacity. Stir well before use.
&nbsp;
Drying times: Recoatable after 16 hours.
&nbsp;
Spreading capacity: 12-16 m2/l when applied by brush on a smooth surface.
&nbsp;
Equipment cleaner: Crown White Spirit
&nbsp;
Colour range: Red Oxide

Red Oxide (Pre-Fab) Primer/Finish Glossy 1L

Red Oxide (Pre-Fab) Primer/Finish Glossy 4L
WSG-49115
Description;
economical primer/surfacer specifically designed for workshop/industrial use on steelwork, commercial vehicle bodies, machinery, metal casement windows etc. This shop primer produces a gloss finish, sometimes preferred when a period of weeks/months is likely to elapse before overcoating. If overcoating is to take place more or less immediately, the use of a matt primer i.e. Crown Red Oxide/Zinc Chromate Primer is recommended. For maximum protection of exposed steelwork, particularly in coastal regions, the use of Crown Zinc Phosphate Primer is recommended.
&nbsp;
Characteristics: A special synthetic medium pigmented with red oxide pigments.
&nbsp;
Advantages: Economical, good corrosion resistance and good adhesion properties.
&nbsp;
Finish: Glossy
&nbsp;
Application: By brush, roller or spray
&nbsp;
Thinning: Supplied ready for use for brush application on smooth surfaces but where necessary, and for spray application, thin with Crown White Spirit. Over thinning will affect opacity. Stir well before use.
&nbsp;
Drying times: Recoatable after 16 hours.
&nbsp;
Spreading capacity: 12-16 m2/l when applied by brush on a smooth surface.
&nbsp;
Equipment cleaner: Crown White Spirit
&nbsp;
Colour range: Red Oxide
&nbsp;
Pack sizes: 4 litres

Red Oxide (Pre-Fab) Primer/Finish Glossy 4L

One Pack Etch Primer (Wash Primer)1L
WSG-49116
Description;
A holding primer, supplied in one-pack form, for blast, cleaned structural steelwork. Also recommended for use on galvanized iron surfaces, hard polished alloys etc. When applied to blast cleaned iron and steelwork, provides protection against corrosion during the fabrication period. A coat of conventional rust-inhibiting metal primer should be applied over the Etch Primer, within a one month period, where severe corrosive conditions, particularly in coastal regions are present or evident.
&nbsp;
Characteristics: A single-pack etch primer based on modified Polyvinyl Butyral resin and rust inhibitive pigments and acid.
&nbsp;
Advantages: Affords maximum adhesion on galvanized surfaces and all smooth ferrous and non-ferrous metals. Provides limited protection during fabrication. Quick-drying. High spreading capacity. Ideal where chemical preparation is impractical.
&nbsp;
Application: By brush or conventional spray.
&nbsp;
Thinning: Supplied ready for use no thinning required.
&nbsp;
Drying time: Touch dry: 20 minutes. Through dry: 1 hour Re-coatable: 4 hours
&nbsp;
Spreading Capacity: 18-20 m2/l when applied by brush or spray on smooth surfaces. 10-12 m2/l when applied to blast cleaned surfaces at 12 microns DFT
&nbsp;
Colour range: Yellow (semi-transparent)
&nbsp;
Pack sizes: 1 litre, 4 litres and 20 litres
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, and Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS
&nbsp;
Ferrous and non-ferrous metals: Prepare surface (refer Data sheet SP 3)
&nbsp;
Metal surfaces: Apply liberally by brush or spray, one coat of Crown Etch Primer. Overcoat with a conventional metal Primer within six months for maximum protection especially on exposed metalwork and on all steelwork in coastal and damp conditions.

One Pack Etch Primer (Wash Primer)1L

One Pack Etch Primer (Wash Primer)4L
WSG-49117
Description;
A holding primer, supplied in one-pack form, for blast, cleaned structural steelwork. Also recommended for use on galvanized iron surfaces, hard polished alloys etc. When applied to blast cleaned iron and steelwork, provides protection against corrosion during the fabrication period. A coat of conventional rust-inhibiting metal primer should be applied over the Etch Primer, within a one month period, where severe corrosive conditions, particularly in coastal regions are present or evident.
&nbsp;
Characteristics: A single-pack etch primer based on modified Polyvinyl Butyral resin and rust inhibitive pigments and acid.
&nbsp;
Advantages: Affords maximum adhesion on galvanized surfaces and all smooth ferrous and non-ferrous metals. Provides limited protection during fabrication. Quick-drying. High spreading capacity. Ideal where chemical preparation is impractical.
&nbsp;
Application: By brush or conventional spray.
&nbsp;
Thinning: Supplied ready for use no thinning required.
&nbsp;
Drying time: Touch dry: 20 minutes. Through dry: 1 hour Re-coatable: 4 hours
&nbsp;
Spreading Capacity: 18-20 m2/l when applied by brush or spray on smooth surfaces. 10-12 m2/l when applied to blast cleaned surfaces at 12 microns DFT
&nbsp;
Colour range: Yellow (semi-transparent)
&nbsp;
Pack sizes: 1 litre, 4 litres and 20 litres
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, and Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS
&nbsp;
Ferrous and non-ferrous metals: Prepare surface (refer Data sheet SP 3)
&nbsp;
Metal surfaces: Apply liberally by brush or spray, one coat of Crown Etch Primer. Overcoat with a conventional metal Primer within six months for maximum protection especially on exposed metalwork and on all steelwork in coastal and damp conditions.

One Pack Etch Primer (Wash Primer)4L

Crown Universal Alkali-Resisting Wall Primer 1 L
WSG-49118
Description;
Designed  for use on new and unpainted (dry) plaster, cement, concrete, brick and hard asbestos sheets, etc, prior to the application of oil-based paints. Should not be used for priming loosely bound or porous surfaces for which Crown Penetrating Primer is recommended.
&nbsp;
Characteristics: Alkali-Resistant medium with lead-free pigmentation.
&nbsp;
Advantages: Seals plaster before applying undercoat and oil finishes. Alkali resistant.
&nbsp;
Application: Apply by brush working well into the wall surface.
&nbsp;
Thinning: On porous and textured surfaces, thin to ease brushing with Crown White Spirit. Do not over thin. Stir well before use.
&nbsp;
Drying Times: Allow to dry overnight before recoating.
&nbsp;
Spreading Capacity: 10-12m2/l on smooth, steel float plaster. The spreading capacity will be considerably reduced when applied to rough or porous surfaces.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: Off White.
&nbsp;
Pack Sizes: 4 litres and 20 litres.

Crown Universal Alkali-Resisting Wall Primer 1 L

Crown Universal Alkali-Resisting Wall Primer 4L
WSG49119
Description;
Designed for use on new and unpainted (dry) plaster, cement, concrete, brick and hard asbestos sheets, etc, prior to the application of oil-based paints. Should not be used for priming loosely bound or porous surfaces for which Crown Penetrating Primer is recommended.
&nbsp;
Characteristics: Alkali-Resistant medium with lead-free pigmentation.
&nbsp;
Advantages: Seals plaster before applying undercoat and oil finishes. Alkali resistant.
&nbsp;
Application: Apply by brush working well into the wall surface.
&nbsp;
Thinning: On porous and textured surfaces, thin to ease brushing with Crown White Spirit. Do not over thin. Stir well before use.
&nbsp;
Drying Times: Allow to dry overnight before recoating.
&nbsp;
Spreading Capacity: 10-12m2/l on smooth, steel float plaster. The spreading capacity will be considerably reduced when applied to rough or porous surfaces.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: Off White.
&nbsp;
Pack Sizes: 4 litres and 20 litres.

Crown Universal Alkali-Resisting Wall Primer 4L

Crown Universal Alkali-Resisting Wall Primer20 ltrs
WSG-49120
Description;
Designed for use on new and unpainted (dry) plaster, cement, concrete, brick and hard asbestos sheets, etc, prior to the application of oil-based paints. Should not be used for priming loosely bound or porous surfaces for which Crown Penetrating Primer is recommended.
&nbsp;
Characteristics: Alkali-Resistant medium with lead-free pigmentation.
&nbsp;
Advantages: Seals plaster before applying undercoat and oil finishes. Alkali resistant.
&nbsp;
Application: Apply by brush working well into the wall surface.
&nbsp;
Thinning: On porous and textured surfaces, thin to ease brushing with Crown White Spirit. Do not over thin. Stir well before use.
&nbsp;
Drying Times: Allow to dry overnight before recoating.
&nbsp;
Spreading Capacity: 10-12m2/l on smooth, steel float plaster. The spreading capacity will be considerably reduced when applied to rough or porous surfaces.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: Off White.
&nbsp;
Pack Sizes: 4 litres and 20 litres.
&nbsp;

Crown Universal Alkali-Resisting Wall Primer 20ltrs

Crown Penetrating Primer 1 lts
WSG-49121
Description;
A primer especially designed for the binding of loosely bound, powdery and chalking surfaces. Recommended for use when redecorating external walls which have been neglected and wall and ceiling surfaces previously coated with cement paints, distemper, lime wash etc. The application of emulsion and other pigmented finishes directly onto loosely bound surfaces invariably results in an early breakdown due to loss of adhesion.
&nbsp;
Prior to the application of Crown Penetrating Primer, all loose, unsound and flaking paint and other contamination must be removed (refer surface preparation Data Sheet SP 1).
&nbsp;
Characteristics: A special oil varnish medium incorporating an off-white marker pigment for identification purposes.
&nbsp;
Advantages: Excellent adhesion and penetrating characteristics. Provides a firm, stable foundation for the application of a wide variety of decorative paint systems.
&nbsp;
Application: Brush.
&nbsp;
Thinning: Supplied ready for use but may be thinned with Crown White Spirit for application to rough textured surfaces. Avoid over thinning. Stir well before use.
&nbsp;
Spreading Capacity: Due to its penetrating characteristics Crown Penetrating Primer, when properly applied, will only cover an area of 6-7 m2/l on smooth surfaces. Spreading capacity will be reduced when used on rough walls.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: Nearly transparent with an off-white marker pigment.
&nbsp;
Pack sizes: 4 litres and 20 litres.
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, Kisumu and though Crown Stockists.
&nbsp;
SPECIFICATIONS:
&nbsp;
Flaking, Powdery, Lime washed, Distempered or Cement Painted surfaces: Thoroughly remove all possible loose and flaking material (refer Data sheet SP 2). Ensure that the building fabric is dry before priming. Apply liberally, by brush, 1 coat Crown Penetrating Primer. The application of a 2nd coat is advisable in severe circumstances

Crown Penetrating Primer 1 lts

Crown White Wood Primer 1 lts
WSG-49122
Description;
A high quality, general-purpose primer for soft woods, plywood and chipboards etc. Timber treated with water repellents and Protection are best primed with Crown Aluminium Wood primer
&nbsp;
Characteristics: Oil-based medium with lead-free pigmentation producing a White (or Pink) finish.
&nbsp;
Advantages: Good penetrating properties. Provides a strong bond between the undercoat and timber surface.
&nbsp;
Thinning: Supplied ready for use but where necessary and for spray application thin with Crown White Spirit. Avoid over thinning. Stir well before use.
&nbsp;
Drying Times: Surface Dry: 4hours. Through Dry: 8hours. Re-coatable: 16hours.
&nbsp;
Spreading Capacity: 13-15m2/l on smooth, non-porous surfaces. The spreading capacity will vary considerably depending on the texture and porosity of the timber.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour Range: White or Pink.
&nbsp;
Pack Sizes: 1 litre, 4 litres and 20 litres.
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, Kisumu and Crown Stockists.
&nbsp;
SPECIFICATIONS:
&nbsp;
New Dry Wood Work. Prepare surface (refer Data Sheet SP2). Apply 1 coat Crown Stockists.
Previously Painted Wood Work. Prepare the surface and patch prime all bare timber with 1 coat Crown Wood Primer.

Crown White Wood Primer 1 lts

Crown Aluminium Wood Primer 4 lts
WSG-49123
Description;
A high quality primer for application to new and bare woodwork. Can be used on both hard and soft woods in addition to timber treated with (non-bituminous based) wood Protection. Recommended for exterior work.
&nbsp;
Characteristics: Manufactured from top quality, lead-free pigments with a high proportion of aluminium dispersed in an oleo resinous medium.
&nbsp;
Advantages: Suitable for all types of properly prepared timber. Hard drying with good penetration and excellent adhesion. Minimizes risk of blistering. Easy to apply.
&nbsp;
Finish: Matt.
&nbsp;
Application: By brush, roller or spray.
&nbsp;
Thinning: Supplied ready for use but may be thinned to ease brushing where necessary and for spray application with Crown White Spirit. Avoid over thinning. Stir well before use.
&nbsp;
Drying Times: Re-coatable after 16 hours.
&nbsp;
Spreading Capacity: 12-15m2/l on smooth, non-porous surfaces.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: Metallic Grey.
&nbsp;
Pack Sizes: 1 litre, 4 litres and 20 litres.
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS:
&nbsp;
Â New Timber Ensure that the timber is dry. Prepare surface (Refer SP 2). Apply 1 coat Crown Aluminium Wood Primer.
Previously Painted Surfaces Prepare the surface and patch prime bare timber with 1 coat Crown Aluminium Wood Primer.

Crown Aluminium Wood Primer 4 lts

Crown Solo Plus 3 Masonary Primer 20 lts
WSG-49124
Description;
Crown Solo Plus 3 Masonary Primer 20 lts

Crown Solo Plus 3 Masonary Primer 20 lts

Crown Emulsion Undercoat EXT/INT 20L–Emulsion water based
WSG-49125
Description;
Crown Emulsion Undercoat EXT/INT is a quick-drying, general-purpose, emulsion-based primer suitable as the first coat for well-dried cement plaster. It is an efficient 1st sealing coat on various substrates as concrete plasterwork, block &amp; brick in exterior &amp; interior.
It protects concrete by penetrating the dried plaster &amp; seals the surface from moisture, the alkalinity of surface and resists water to seep in &amp; damage concrete. It is environmentally safe as no added lead, chrome &amp; mercury.
UNIQUE SELLING POINT (USP)
&nbsp;
<ul>
<li>For interior &amp; exterior use</li>
<li>Quick drying</li>
<li>Water thinned, rapid drying, low VOC and Low odor</li>
<li>Good opacity and adhesion</li>
</ul>
Excellent moisture and alkaline resistance

Crown Emulsion Undercoat EXT/INT 20L–Emulsion water based

Crown Acrylic Primer / Sealer Undercoat
WSG-49126
Description;
A quick-drying, general-purpose primer/undercoat for timber and (untreated) hardboard prior to the application of Crown Super Gloss Paint, Eggshell Enamel etc.
&nbsp;
Characteristics: Lead-free pigmentation incorporated in a P.V.A./Acrylic co-polymer emulsion medium.
&nbsp;
Advantages: Water thinned, rapid drying. Re-coatable in under 4 hours in dry conditions. Enables a three-coat system of primer, undercoat and finish to be applied in one day in good drying conditions.
&nbsp;
Finish: Matt.
&nbsp;
Application: Apply to new and unpainted timber by brush, roller or spray.
&nbsp;
Thinning: Supplied ready for use. For spray application thin to spraying viscosity with clean water. Avoid over thinning otherwise the opacity will be affected. Stir well before use.
&nbsp;
Drying Times: Touch dry ½ hour. Re-coatable after 3-4 hours in dry conditions.
&nbsp;
Equipment Cleaner: Water.
&nbsp;
Colour Range: White (ex-stock). Colours can be supplied by prior arrangement for large housing projects etc.
&nbsp;
Pack Sizes: 1 litre, 4 litres and 20 litres.
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa and Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS:
&nbsp;
New and Bare Woodwork &amp; Untreated Hardboard: Prepare surface (refer Data Sheet SP2). Apply 2 coats Crown Acrylic Primer/Undercoat
&nbsp;
Previously Gloss &amp; Eggshell painted surfaces: Not recommended. Use Crown Undercoat.

Crown Acrylic Primer / Sealer Undercoat

Crown Undercoat
WSG-49127
Description;
A top quality, multipurpose undercoat, which provides a flexible, non-absorbent foundation for gloss finishes. Possesses excellent obliterating power and brushes deep into cracks, filling minor irregularities. Suitable for interior and exterior use on all type of surfaces i.e. wood, metal, plaster, stone, asbestos etc, over the appropriate primer.
&nbsp;
Characteristics: Manufactured from finest pigments and extenders incorporated in a high-quality alkyd resin medium and drying oils.
&nbsp;
Advantages: Excellent opacity and sanding properties, provides a sound key for subsequent finishing coat.
&nbsp;
Finish: Matt.
&nbsp;
Application: Apply by brush, roller or spray equipment.
&nbsp;
Thinning &amp; Mixing: Where necessary thin with Crown White Spirit to ease brushing and for spray application. Avoid over thinning. Stir well before use.
&nbsp;
Drying Times: 12-16 hours. Re-coatable overnight under normal conditions.
&nbsp;
Spreading Capacity: 13-17 m2/l when applied to smooth, non-porous surfaces.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: White
&nbsp;
Pack Sizes: 1 litre, 1 litre, 4 litres, and 20 litres.
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS:
&nbsp;
New primed metal, wood, plaster etc. Prepare surface (see relevant surface preparation sheets for plaster, metal, wood). Apply 1 coat Crown Undercoat over the appropriate primer. For maximum protection and when overcoating a dark primer with a pale undercoat, a second coat of undercoat is recommended.
&nbsp;
Previously painted surfaces – unsound condition. Prepare surface and patch prime bare surfaces with appropriate primer. Apply 1 coat Crown Undercoat.
&nbsp;
Previously painted surfaces in reasonable condition. Prepare surface. Apply 1 coat Crown Undercoat.
&nbsp;
Previously painted surfaces in good condition. Rub down with fine sandpaper. If previous gloss or eggshell finish is in good condition the application of an undercoat can be avoided unless a colour change is required.

Crown Undercoat

Crown Two-Pack Epoxy Floor Paint
WSG-49128
Description;
Product Description &amp; uses: A high performance coating supplied in two-pack form offering maximum resistance to pedestrian and vehicular traffic. It forms a tough impervious film and is recommended for use where continual wetting and cleaning processes are being used. Recommended for use on concrete floors in chemical plants, laboratories, hospitals, dairies, breweries, food factories, bottling plants, vehicle showrooms etc.
&nbsp;
Its excellent chemical resistance withstands all types of detergents, bleaches, weak solutions of acids and alkali (10%), fats, oils, fruit juices and various types of solvents.
&nbsp;
Do not apply Crown Two-Pack Epoxy Floor Paint over previously painted surfaces (see specification) or to new concrete floor screeds until they have fully cured/dried out.
&nbsp;
The two-pack product, which is mixed shortly before use with the catalyst/hardener, does not attain maximum hardness and chemical resistance until 4 -5 days after application (at a temperature of 18°C/65°F).
&nbsp;
Characteristics: Manufactured from high-quality inert pigments finely ground in a combination of epoxy resins.
&nbsp;
Advantages: Abrasion, chemical and solvent resistant decorative finish.
&nbsp;
Finish: Gloss.
&nbsp;
Application: By brush, roller or spray (when applying by spray, face masks must be worn).
&nbsp;
Thinning &amp; Mixing: The two components (base and catalyst) must be mixed together to produce 4 litres of material, alternatively smaller quantities can be mixed strictly in accordance with the mixing ratios indicated on the container. Stir well and allow standing for 15-20 minutes before use. Thin the 1st coat approximately 20% with Crown Two-Pack Epoxy Thinners to ease brushing and to improve adhesion with the floor screed.
&nbsp;
Note: As the pot-life of the mixed material is limited to about 12 hours, care should be taken to avoid mixing more material than can be used during one working day.

Crown Two-Pack Epoxy Floor Paint

Crown Roof Master Self Priming Acrylic
WSG-49129
Description;
Product Description &amp; uses: Roofmaster is a flexible coating designed for application to new and previously painted (sound) roofs, walls and masonry. Roofmaster is particularly suited for application to asphalt and bituminous emulsion coated surfaces in addition to concrete, brick, asbestos, cement etc., weathered GCI and aluminium etc.
&nbsp;
Characteristics: Based on flexible 100% pure Acrylic emulsion formulation incorporating high-quality lightfast pigments.
&nbsp;
Advantages: Excellent adhesion and weathering properties. The flexible film minimizes crazing when applied to bitumen-based substrates. Water-based, quick-drying and easy to apply. Economical and easy to maintain. Allows the substrate to breathe and can therefore, be applied to surfaces which still contain up to 15% moisture.
&nbsp;
Finish: Matt.
&nbsp;
Colour Range: Red Oxide, Beetle Green, Cornflower and Brick Terracotta. Other shades available upon request.
&nbsp;
Application: By brush or roller. Can be applied by spray equipment if necessary. For best results the application of 2 coats of Roofmaster is recommended.
&nbsp;
Drying times: Re-coatable after 3-4 hours in dry conditions.
&nbsp;
Thinning: The thinning of Roofmasteris not recommended except when the product is to be applied to textured surfaces when a little clean water can be added to ease brushing. Stir well before use.
&nbsp;
Spreading capacity: The spreading capacity of Crown Roofmaster will vary greatly depending on the porosity and profile of the surface. Spreading capacity, when applied to a smooth, non-porous surface, will be approximately 10-12 m2/l.
&nbsp;
Pack sizes: 1 litre, 4 litres and 20 litres
&nbsp;
Surface preparation: Prior to applying Roofmaster to asphalt and bitumen emulsion surfaces ensure that the substrate is clean and dust free and in sound structural condition. When coating flat roof surfaces, ensure that all surface rainwater is thoroughly removed and the surface allowed drying out. The substrate may be damp but there must be no actively percolating water.
&nbsp;
New galvanized iron and aluminium surfaces require thorough degreasing with Crown White Spirit before coating. Ensure that the surfaces are completely clean and dry. Galvanized iron and aluminium roof sheets that have not be allowed to weather for a minimum of six months should be etched with Crown Passivating Wash/ Mordant solution before painting commences.

Crown Roof Master Self Priming Acrylic

Crown Ronseal Hardglaze 1 lt
WSG-49130
Description;
Crown Ronseal Hardglaze 1 lt

Crown Ronseal Hardglaze 1 lt

Crown Anteak Oil 5ltrs
WSG-49131
Description;
Crown Anteak Oil 5ltrs

Crown Anteak Oil 5ltrs

NC Clear Lacquer
WSG-49132
Description;
Crown’s NC Lacquer, is an improved Marine varnish that protects the wood against water damage. It is mostly used on boats and dhows, but can also be used to protect furniture and wood fixtures in homes around the coastal areas.

NC Clear Lacquer

Crown Sanding Sealer
WSG-49133
Description;
Characteristics: Manufactured from a resin-modified Nitrocellulose
&nbsp;
Advantages: Fast drying which allows more coats to be applied in a shorter period of time and thus speeds up completion of the job. Easy to apply.
&nbsp;
Finish: Matt.
&nbsp;
Application: By brush or spray.
&nbsp;
Thinning: Supplied ready for use for brush application. Thin up to 50% with Crown Standard Thinner for spray application. Stir well before use.
&nbsp;
Drying Times: Surface dry in 10min. Sandable in 30min. Recoatbale in 1hour.
&nbsp;
Spreading Capacity: 4 – 8 m2/l dependent on wood porosity
&nbsp;
Equipment cleaner: Crown Standard Thinner.
&nbsp;
Colour range: Slightly milky Clear.
&nbsp;
Pack sizes: ½ litre, 1 litre and 4 litres.
&nbsp;
Availability: From Crown Depots and through Crown Stockists.
&nbsp;
SPECIFICATIONS:
&nbsp;
New and bare woodwork and furniture: The wooden surface must be sanded smooth using 150 grit sandpaper and finishing off with 320 grit sandpaper. Dust off thoroughly and wipe with a dry cotton cloth. Apply 1 coat Crown Sanding Sealer.
&nbsp;
For health &amp; safety information, please refer to our Material Safety Data Sheet (MSDS).

Crown Sanding Sealer

Crown Oil Varnish Stains
WSG-49134
Description;
Product Description &amp; uses: A hardwearing oil varnish stain, producing a gloss finish suitable for new and previously varnished timber surfaces. Available in six shades. Crown Varnish Stain is particularly suitable for use by furniture manufacturers and for general decorative use on all types of untreated timber.
&nbsp;
Characteristics: Manufactured from a high quality alkyd resin and light-fast oil-stainers.
Advantages: Economical, Easy to apply and hardwearing gloss finish.
&nbsp;
Finish: Gloss.
&nbsp;
Application: By brush or spray.
&nbsp;
Thinning: Supplied ready for use but may be thinned with a little Crown White Spirit for 1st coat work, on bare timber, or for spray application. Stir well before use.
&nbsp;
Drying Times: Surface dry in 4 hours. Recoatable in 14 hours.
&nbsp;
Spreading Capacity: 13 – 15 m2/l when applied on smooth non-porous surfaces
&nbsp;
Equipment cleaner: Crown White Spirit.
&nbsp;
Colour range: Available in Natural Oak, Light Oak, Medium Oak, Dark Oak, Walnut, and Mahogany.
&nbsp;
Pack sizes: ½ litre, 1 litre, 4 litres and 20 litres.
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS:
&nbsp;
New and bare woodwork and furniture: Prepare surface (refer surface preparation data sheet SP 2). Apply 3 coats Crown Varnish Stain.
&nbsp;
Previously varnished woodwork – sound condition: Prepare the surface. Apply 2 coats Crown Varnish Stain.
&nbsp;
Previously varnished surfaces – unsound: Thoroughly remove all varnish coatings down to bare timber if necessary using Crown Paint and Varnish Remover and/or mechanical sanding equipment. Prepare surface. Apply 3 coats Crown Varnish Stain
&nbsp;
Notes:
&nbsp;
1. Do not apply Crown Varnish Stain over surfaces that have been wax polished unless all traces of polish have been removed and the surface sanded thoroughly.
&nbsp;
2. The shade effect obtainable with Crown Varnish Stain will vary greatly depending upon the type and colour of the timber being coated.
&nbsp;
3. It will not be possible to produce a light effect (i.e. Natural Oak or Light Oak) on a naturally dark timber or a timber, which has previously been stained with dark shade.
&nbsp;
4. For best results, rub down with waterproof abrasive paper (wet and dry) or fine sandpaper between coats to remove any film surface defects and wipe clean.

Crown Oil Varnish Stains

Crown Multi-Purpose Clear Varnish
WSG-49135
Description;
Product Description &amp; uses A quick-drying clear varnish formulated to produce a tough, gloss finish on interior woodwork.
&nbsp;
Recommended for use as a furniture finish and for general application on new or sanded door panels and frames, counters, timber pelmets, skirting boards, wall partitioners etc.
&nbsp;
Characteristics: Manufactured from a blend of high quality alkyd resin and a special hardening resin.
&nbsp;
Advantages: Quick drying. Tough, clear gloss finish. Ideal for coating furniture and for general use.
&nbsp;
Finish: Gloss.
&nbsp;
Application: By brush or spray.
&nbsp;
Thinning: Supplied ready for use but may be thinned with Crown White Spirit for first coat work, on bare timber, and for spray application.
&nbsp;
Drying Times: Surface dry: 2 hours. Recoatable in 12 hours.
&nbsp;
Spreading Capacity: 12 – 15 m2/l when applied to smooth, non-porous surfaces.
&nbsp;
Equipment cleaner: Crown White Spirit.
&nbsp;
Pack sizes: ½ litre, 1 litre, 4 litres and 20 litres
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, and Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS:
&nbsp;
New and bare woodwork and furniture: Prepare surface (refer data sheet SP 2). Apply a minimum of 3 coats Crown Multipurpose Clear Varnish.
&nbsp;
Previously varnished Woodwork – sound Condition: Apply 2 coats Crown Multipurpose Clear Varnish.
&nbsp;
Previously varnished Woodwork – unsound timber, Condition: Remove all old and damaged varnish down to bare surface if necessary using Crown Paint and Varnish Remover and/or mechanical sanding equipment. Prepare surface as for new timber. Apply 3 coats Crown Multipurpose Clear Varnish.
&nbsp;
Notes:
&nbsp;
1. Do not apply Crown Multipurpose Clear Varnish over surfaces that have been previously wax polished unless all traces of polish have been removed.
&nbsp;
2. All surfaces should be rubbed down with fine sandpaper or waterproof adhesive paper between coats to obtain best results.

Crown Multi-Purpose Clear Varnish

Crown Two-Pack Epoxy Floor Paint – 4 Litres
WSG-49136
Description;
high-performance floor paint supplied in two-pack form, suitable for INTERIOR use on new and bare parquet and timber floors, door panels and general woodwork. Recommended as a clear furniture finish for use by furniture manufacturers and in the home. Do not use for overcoating previously single pack varnished surfaces unless all varnish coatings have been removed.
&nbsp;
Characteristics: Manufactured from high-quality epoxy resin medium in a two-pack form with a polyamide curing agent.
Advantages: Hard-wearing, high gloss clear finish. Maintains the natural beauty of the timber. Excellent chemical and abrasion resistance. Good flexibility.
&nbsp;
Finish: High gloss (can also be supplied in an eggshell finish. However, when coating floors the high gloss is recommended due to its superior abrasion resistance).
&nbsp;
Application: Apply by brush or spray. For spray, application masks should be worn.
&nbsp;
Thinning &amp; Mixing: Supplied in two-pack form, the two components should be mixed together thoroughly and allowed to stand for 15-20 minutes before application. To ease brushing and particularly for first coat work on porous timber, thin with Crown Two-Pack Epoxy Thinners. For spray application thin to spraying viscosity. Due to the limited pot life of the mixed material, care should be taken to avoid mixing more material than can be used within the working day. Where less than 4 litres of material is required, the base and catalyst should be mixed strictly in accordance with the mixing ratios mentioned on the container.
&nbsp;
Drying Times: Surface dry in 2 hours, re-coatable in 14 hours. Attains maximum hardness about 7 days after application.
&nbsp;
Spreading capacity: 11 – 12 m2/l when applied to smooth surfaces.
&nbsp;
Colour range: Clear.
&nbsp;
Chemical resistance: Resistant to chemicals and solvents.
&nbsp;
Equipment Cleaner: Crown Two-Pack Epoxy Thinners.
&nbsp;
Pack Sizes: 4 litres (combined base and catalyst).
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, Kisumu and through selected Crown Stockists.
&nbsp;
SPECIFICATIONS:
&nbsp;
New and Bare woodwork: Prepare surface (refer Data sheet SP 2). Apply 3 to 4 coats of Crown Two-pack Epoxy clear varnish. The 1st coat must be thinned up to 20% to ease brushing and to allow good penetration of the timber. Subsequent coats can be thinned as necessary. (Refer Notes below).
&nbsp;
Previously Varnished: Remove all previous coatings using Crown Paint and Varnish Remover. On previously varnished floors the use of mechanical sanding equipment is recommended. Apply 3 or 4 coats Crown Two-Pack Epoxy Varnish.
&nbsp;
Notes:
&nbsp;
1. Ensure the woodwork is completely dry as moisture will react with the varnish and produce a milky appearance. Crown epoxy varnish should not be applied to floors if there is a danger of rising damp (especially in old buildings which have no damp-proof course) as this may cause the timber floor tiles to lift.
&nbsp;
2. When coating new and sanded parquet wood block floors, ensure that all surface dust and contamination is completely removed prior to coating. It is recommended that dust from the floor surface and between the timber joints should be removed a few minutes before coating using a brush and then a cloth dipped in the epoxy thinners.
&nbsp;
3. To obtain a smooth finish, each coat must be rubbed down with fine sandpaper, preferably using fine waterproof abrasive paper. Wipe clean before overcoating.
&nbsp;
4. In order to obtain a smooth, high-gloss finish, the application of several thin coats is recommended. Do not apply too thickly and avoid over-brushing.

Crown Two-Pack Epoxy Floor Paint – 4 Litres

Crown 2K Polyutherane Enamel Clear – Exterior 4lts
WSG-49138
Description;
Crown 2K Polyutherane Enamel Clear – Exterior 4lts

Crown 2K Polyutherane Enamel Clear – Exterior 4lts

Crown Two-Pack Polyurethane Varnish
WSG-49139
Description;
Do not use for overcoating single-pack varnished surfaces unless all varnish coatings have been removed.
&nbsp;
Characteristics: A two-pack material based on polyurethane resin and special hardeners.
&nbsp;
Advantages: Hard, high gloss clear finish. Maintains the natural beauty of the timber. Very good chemical and abrasion resistance. Excellent adhesion and flexibility.
&nbsp;
Finish: High gloss. (Can also be supplied in eggshell &amp; matt finish).
&nbsp;
Application: Apply by brush or spray. For spray, application masks should be worn.
&nbsp;
Thinning &amp; Mixing: Supplied in two-pack form, the two components should be mixed together thoroughly and allowed to stand for 15 – 20 minutes before application. To ease brushing and particularly for first coat work on porous timber, thin with 2 Pack Polyurethane Thinner. For spray application thin to spraying viscosity.
&nbsp;
Due to the limited pot life of the mixed material, care should be taken to avoid mixing more material than can be used within the working day. Where less than 4 litres of material is required, the base and catalyst should be mixed strictly in accordance with the mixing ratios mentioned on the container.
&nbsp;
Drying Times: Surface dry: 2 hours, re-coatable: 14 hours. Attains maximum hardness after approximately 7 days of application.
&nbsp;
Spreading Capacity: 11 – 12 m2/l when applied to normal smooth surfaces.
&nbsp;
Colour: Clear.
&nbsp;
Chemical resistance: Resistant to chemical fumes and splashes.
&nbsp;
Equipment Cleaner: Crown Two-Pack Polyurethane Thinners.
&nbsp;
Pack Sizes: 4 litres (combined base and catalyst) and 1 litre
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, and Kisumu and through selected Crown Stockists.
&nbsp;
SPECIFICATIONS
&nbsp;
New and Bare Woodwork: Prepare surface (refer surface preparation Data sheet SP 4). Apply 2 or 3 coats of Crown Two-pack Polyurethane Clear Varnish. The first coat must be thinned up to 20% to ease brushing and to allow good penetration of the timber. Subsequent coats can be thinned as necessary. (Refer notes below).
&nbsp;
Previously Varnished woodwork: Remove all previous Varnish coatings using Crown Paint and Varnish Remover. On previously varnished floors the use of mechanical sanding equipment is recommended.
&nbsp;
Notes:
&nbsp;
1. When coating new and sanded parquet woodblock floors, ensure that all surface dust and contamination is completely removed prior to coating. It is recommended that dust from the floor surface and between the timber joints should be removed a few minutes before coating using a cloth dipped in the two-pack thinners.
&nbsp;
2. To obtain a smooth finish, each coat must be rubbed down with fine sandpaper, or preferably fine waterproof abrasive paper. Wipe clean before overcoating.
&nbsp;
3. In order to obtain a smooth high gloss finish, the application of several thin coats is recommended. Do not apply too thickly and avoid over-brushing.
&nbsp;
4. Do not apply Crown two-pack polyurethane over floors that have been wax polished unless all trace of polish is removed using the solvent following which the timber must be thoroughly sanded down. Failure to remove all polish will prevent the varnish from drying and a patchy appearance will result.
&nbsp;
5. Ensure the woodwork is completely dry as moisture will react with the varnish and produce a milky appearance and may cause bubbling and blistering. Crown two-pack polyurethane must not be applied to floors if there is a danger of rising damp (especially in old buildings which have no damp-proof course) or on timber laid on a floor screed, which still contains moisture, as the coating will prevent the floor from breathing and may cause the timber to lift.

Crown Two-Pack Polyurethane Varnish

Crown Polyurethane Matt Varnish 4lts
WSG-49140
Description;
Crown Polyurethane Matt Varnish 4lts

Crown Polyurethane Matt Varnish 4lts

Crown Polyurethane Wood Varnish High Gloss 4 lts
WSG-49141
Description;
Crown Polyurethane Wood Varnish High Gloss 4 lts

Crown Polyurethane Wood Varnish High Gloss 4 lts

Crown Polyurethane Clear Varnish
WSG-49142
Description;
Product Description &amp; uses: A high-quality single pack Polyurethane Varnish, specially formulated to produce a tough, full gloss or matt clear finish on parquet and all types of timber flooring (gloss only). Suitable for general use on furniture, door panels and frames, pelmets, skirting boards, counters, wall partitions and general woodwork.
&nbsp;
Characteristics: Manufactured from an oil modified polyurethane resin.
&nbsp;
Advantages: Retains natural beauty of the timber. Excellent adhesion to timber. Hard-wearing, abrasion resistant finish. Single pack type which facilitates easy application. High spreading capacity.
&nbsp;
Finish: High-gloss and Matt Finish. The latter is not recommended for use on floors.
&nbsp;
Application: Apply by brush, working well into the surface to obtain good penetration and adhesion.
&nbsp;
Thinning: The first coat, on new and bare timber, should be thinned to ease brushing consistency using Crown White Spirit. Subsequent coats can be thinned if necessary. The use of inferior thinners will affect the gloss, drying and durability.
&nbsp;
Drying Times: Touch dry: 3- 4 hours. Recoatable in 12 hours in dry, well-ventilated conditions.
&nbsp;
Spreading Capacity: 14 – 16 m2/l when applied by brush on a smooth surface. On new and bare timber the spreading capacity will vary depending on the type and porosity of the wood.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: Clear.
&nbsp;
Pack Sizes: 1 litre, 4 litres and 20 litres.
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, and Kisumu and through Crown Stockists.
&nbsp;
SPECIFICATIONS
&nbsp;
New and Bare Parquet and Timber floors: Prepare surface (refer Data Sheet SP 2). For maximum gloss and protection apply 3 coats of Crown Polyurethane Clear Varnish, thinning the 1st coat to assist application and penetration.
&nbsp;
New and Bare Woodwork: Prepare surface (refer Data Sheet Sp 2). Apply 3 coats Crown Polyurethane Clear Varnish.
&nbsp;
Previously Varnished floors – in sound condition: Prepare surface. Apply 2 coats Crown Polyurethane Clear Varnish.
&nbsp;
Previously Varnished floors – in poor condition: Re-sand the floor with mechanical sanding machine where possible. Alternatively, remove all previous varnish coatings with paint and varnish remover and then treat as for new woodwork.
&nbsp;
Notes
&nbsp;
1. For best results rub down between coats with fine sandpaper (preferably waterproof abrasive paper) and wipe clean.
&nbsp;
2. Do not apply Crown Polyurethane Clear Varnish over the floors which have been wax polished unless all traces of polish are removed using the solvent following which the timber must be thoroughly sanded down. Failure to remove all polish will result in poor drying; poor adhesion and a patchy appearance will result.
&nbsp;
3. When coating new timber, all contamination including cement splashes, greasy finger marks, carpenters pencil marks etc, must be sanded off.
&nbsp;
4. Once the Crown Polyurethane Clear Varnish has been allowed to harden, the application of a clear floor polish will assist in protecting the surface against abrasion and scuffing from dust particles, grit etc, and pedestrian traffic.
&nbsp;
5. Ensure the woodwork is completely dry as moisture will react with the varnish and produce a milky appearance. Crown Polyurethane Clear Varnish should not be applied to floors if there is a danger of rising damp (especially in old buildings which have no damp-proof course) as this may cause the timber floor tiles to lift

Crown Polyurethane Clear Varnish

Crown Aquavar Varnish 4L
WSG-49143
Description;
Product Description &amp; uses: A high-quality water-based translucent finish for Interior &amp; Exterior use. It protects and enhances the beauty of all wood such as doors, windows, panels and furniture. It can also be used on joinery items like garden benches, pergolas etc.
&nbsp;
Characteristics: Manufactured from the highest quality water borne dispersion offering good gloss, fast drying and hardness.
&nbsp;
Advantages: Water-based, low VOC, low toxicity and non-flammable. Quick drying (30 min surface dry) and easy to apply. Interior &amp; Exterior use. Good mould, scruff, scratch, UV and water resistance. Good flow, levelling, gloss, hardness and film strength.
&nbsp;
Colour range: Clear and 18 selected shades
&nbsp;
Pack sizes: 4L and 1L plastic buckets
&nbsp;
Finish: Satin and Translucent
&nbsp;
Surface preparation: Surface should be clean, dry and free of any loose powder.
&nbsp;
New timber: The surface must be dry and free of oil/ grease and any other contaminants. Sand down the woodwork to a smooth surface with 150/220 grit sandpaper and dust off thoroughly.
&nbsp;
Previously coated surfaces: Surfaces previously coated with air drying varnish should be lightly abraded with sandpaper before applying Aquavar. If the surface has been previously painted, remove all paint and treat as new wood.
&nbsp;
Application: By brush or roller, with light sanding between coats to improve adhesion
&nbsp;
Drying times: Touch dry: 30 minutes. Over-coating: 2-3 hours
&nbsp;
Spreading capacity: 10 -14m2/L dependent on porosity of the wood
&nbsp;
Thinning: Thin with minimal clean water if required. Avoid over -thinning.

Crown Aquavar Varnish 4L

Crown Timber Master
WSG-49144
Description;
TIMBER MASTER is the innovative oil modified resin wood preservatives with excellent translucent finishes which maintain the natural look of wood and does not hide the wood grains.
&nbsp;
This exceptional product preserves the wood by penetrating deep into the wood to protect it from termites and bacteria which damage the beauty of wood furniture.
&nbsp;
Timber Master Wood stains have the best protection against moisture and ultraviolet rays from the sun which helps in maintaining the wood furniture in its beautiful condition year after year.
&nbsp;
Timber Master is best suited for any table tops including bar counters, hotel dining, tea and coffee tables. It is also suitable for doors, windows, chairs, garden furniture and wooden paneling.
&nbsp;
Colour range: Clear, Mahogany, Teak, Walnut, Pine, Lignum, Ebony and Red Wood. (refer the crown wood finish shade card).
&nbsp;
Drying times: Touch dry: 4 hours. Recoating Time: Minimum 6 hours.
&nbsp;
Finish: Smooth and Matt.
&nbsp;
Thinner: Crown White Spirit (only if required).
&nbsp;
Surface preparation: Surface should be clean, dry and free of any loose powder.
&nbsp;
Thinner: Crown White Spirit (only if required).
&nbsp;
Application: By brush or roller, with light sanding between coats to improve adhesion.
&nbsp;
Spreading capacity: Smooth / Bare softwood 10 m2 /litre. The spreading capacity depends upon the wood type and will change.

Crown Timber Master

Crown Economy Floor Paint – Red Oxide 4Ltrs
WSG-49245
Description;
Crown Economy Floor Paint – Red Oxide 4Ltrs

Crown Economy Floor Paint – Red Oxide 4Ltrs

Economy primer &#8211; red oxide &amp; grey 4L
WSG-49146
Description;
A primer especially designed for the binding of loosely bound, powdery and chalking surfaces. Recommended for use when redecorating external walls which have been neglected and wall and ceiling surfaces previously coated with cement paints, distemper, lime wash etc. The application of emulsion and other pigmented finishes directly onto loosely bound surfaces invariably results in an early breakdown due to loss of adhesion.
&nbsp;
Prior to the application of Crown Penetrating Primer, all loose, unsound and flaking paint and other contamination must be removed (refer surface preparation Data Sheet SP 1).
&nbsp;
Characteristics: A special oil varnish medium incorporating an off-white marker pigment for identification purposes.
&nbsp;
Advantages: Excellent adhesion and penetrating characteristics. Provides a firm, stable foundation for the application of a wide variety of decorative paint systems.
&nbsp;
Application: Brush.
&nbsp;
Thinning: Supplied ready for use but may be thinned with Crown White Spirit for application to rough textured surfaces. Avoid over thinning. Stir well before use.
&nbsp;
Spreading Capacity: Due to its penetrating characteristics Crown Penetrating Primer, when properly applied, will only cover an area of 6-7 m2/l on smooth surfaces. Spreading capacity will be reduced when used on rough walls.
&nbsp;
Equipment Cleaner: Crown White Spirit.
&nbsp;
Colour range: Nearly transparent with an off-white marker pigment.
&nbsp;
Pack sizes: 4 litres and 20 litres.
&nbsp;
Availability: From Crown Depots in Nairobi, Mombasa, Kisumu and though Crown Stockists.
&nbsp;
SPECIFICATIONS:
&nbsp;
Flaking, Powdery, Lime washed, Distempered or Cement Painted surfaces: Thoroughly remove all possible loose and flaking material (refer Data sheet SP 2). Ensure that the building fabric is dry before priming. Apply liberally, by brush, 1 coat Crown Penetrating Primer. The application of a 2nd coat is advisable in severe circumstances.

Economy primer - red oxide & grey 4L

Crown Economy Roof Paint – Red Oxide 4Ltrs
WSG-49147
Description;
Product Description &amp; uses: A high quality durable and flexible coating for the protection of galvanized roofs and exposed steelwork.
Characteristics: Manufactured from the finest light-fast pigments ground in a flexible medium.
Advantages: Unique formulation provides a flexible coating to withstand extreme variations in weather conditions. Excellent hiding power. One finishing coat normally sufficient for redecoration work.
Finish: Semi-Gloss.
Application: By brush or spray on corrugated surfaces. Can also be applied by roller on flat surfaces.
Thinning: Supplied ready for use but where necessary and for spray application can be thinned with Crown White Spirit. Avoid over-thinning; otherwise the opacity will be affected. Stir well before use.
Drying Times: Re-coatable in 16 hours.
Spreading Capacity: 10-13 m2/l when applied to smooth, non-porous surfaces.
Equipment Cleaner: Crown White Spirit.
Colour range: Green, Red Oxide and Cornflower. Also available on 18 selected colours on request.
Pack Sizes: 1 litre, 4 litres and 20 litres.
Availability: From Crown Depots in Nairobi, Mombasa, and Kisumu and through Crown Stockists.
SPECIFICATIONS:
Weathered Galvanized Surfaces/G.C.I Sheets: Prepare surface (refer surface preparation Data Sheet SP 3). Apply 2 coats Crown Roof Paint.
New (unweathered) Galvanized Surfaces/G.C.I. Sheets: Degrease and prepare surface (refer Data Sheet SP 3). Apply 1 coat Crown Zinc Phosphate Primer or Crown Etch Primer (recommended). Apply 2 coats Crown Roof Paint.

Crown Economy Roof Paint – Red Oxide 4Ltrs

Crown Oil Varnish Stains (6 Shades)
WSG-49148
Description;
Product Description &amp; uses: A hardwearing oil varnish stain, producing a gloss finish suitable for new and previously varnished timber surfaces. Available in six shades. Crown Varnish Stain is particularly suitable for use by furniture manufacturers and for general decorative use on all types of untreated timber.
Characteristics: Manufactured from a high-quality alkyd resin and light-fast oil-stainers.
Advantages: Economical, Easy to apply and hardwearing gloss finish.
Finish: Gloss.
Application: By brush or spray.
Thinning: Supplied ready for use but may be thinned with a little Crown White Spirit for 1st coat work, on bare timber, or for spray application. Stir well before use.
Drying Times: Surface dry in 4 hours. Recoatable in 14 hours.
Spreading Capacity: 13 – 15 m2/l when applied on smooth non-porous surfaces
Equipment cleaner: Crown White Spirit.
Colour range: Available in Natural Oak, Light Oak, Medium Oak, Dark Oak, Walnut, and Mahogany.
Pack sizes: ½ litre, 1 litre, 4 litres and 20 litres.
Availability: From Crown Depots in Nairobi, Mombasa, Kisumu and through Crown Stockists.
SPECIFICATIONS:
New and bare woodwork and furniture: Prepare surface (refer surface preparation data sheet SP 2). Apply 3 coats Crown Varnish Stain.
&nbsp;
Previously varnished woodwork – sound condition: Prepare the surface. Apply 2 coats Crown Varnish Stain.
&nbsp;
Previously varnished surfaces – unsound: Thoroughly remove all varnish coatings down to bare timber if necessary using Crown Paint and Varnish Remover and/or mechanical sanding equipment. Prepare surface. Apply 3 coats Crown Varnish Stain
Notes:
1. Do not apply Crown Varnish Stain over surfaces that have been wax polished unless all traces of polish have been removed and the surface sanded thoroughly.
&nbsp;
2. The shade effect obtainable with Crown Varnish Stain will vary greatly depending upon the type and colour of the timber being coated.
&nbsp;
3. It will not be possible to produce a light effect (i.e. Natural Oak or Light Oak) on a naturally dark timber or a timber, which has previously been stained with dark shade.
&nbsp;
4. For best results, rub down with waterproof abrasive paper (wet and dry) or fine sandpaper between coats to remove any film surface defects and wipe clean.

Crown Oil Varnish Stains (6 Shades)

Crown Economy Varnish Clear 4Ltrs
WSG-49149
Description;
Crown Economy Varnish Clear 4Ltrs
&nbsp;
SKU: CR000220

Crown Economy Varnish Clear 4Ltrs

Crown Economy Undercoat White &#8211; 1L
WSG-49150
Description;
Crown Economy Undercoat White 1 Liter is an alkyd-based white-colored economy, multipurpose undercoat, which provides a flexible, non-absorbent foundation for gloss finishes. Possesses excellent obliterating power and brushes deep into cracks, filling minor irregularities. Suitable for interior and exterior use on all types of surfaces i.e. wood, metal, plaster, stone, asbestos, etc, over the appropriate primer.

Crown Economy Undercoat White - 1L

Crown Economy Vesta Gloss Paint
WSG-49151
Description;
Economy Vesta Gloss Paint is available in black-coloured, white-coloured, soft white-coloured and cream finishes. It is an alkyd/ oil-based economy enamel that is ideal for decorating and protecting interior and exterior surfaces.
&nbsp;
Possesses excellent obliterating power and brushes deep into cracks, filling minor irregularities. Suitable for interior and exterior use on all types of surfaces i.e. wood, metal, plaster, stone, asbestos, etc, over the appropriate primer.

Crown Economy Vesta Gloss Paint

ECONOMY VESTA GLOSS CREAM,BRILLIANT WHITE &amp;SOFT WHITE 1L
WSG-49152
Description;
Economy Vesta Gloss Paint is available in black-coloured, white-coloured, soft white-coloured and cream finishes. It is an alkyd/ oil-based economy enamel that is ideal for decorating and protecting interior and exterior surfaces.
&nbsp;
Possesses excellent obliterating power and brushes deep into cracks, filling minor irregularities. Suitable for interior and exterior use on all types of surfaces i.e. wood, metal, plaster, stone, asbestos, etc, over the appropriate primer.

ECONOMY VESTA GLOSS CREAM,BRILLIANT WHITE &SOFT WHITE 1L

Wsg-18940
ECONOMY VESTA EMULSION-(BRILLIANT WHITE,SOFT WHITE,CREAM)
 
Description:
It is an economy emulsion paint for interior use on substrates where washability is not required.
The substrate can be suitably prepared new plaster, wall, ceilings, concrete, brickwork and various type of building boards. Fast Drying. Better coverage. Wide range of colors available.
Economy product for interior use where washability is not required
More durable than ordinary distemper.
Value for money.
Water-based emulsion paint.
Visit whitesun.ke and place your orders.

ECONOMY VESTA EMULSION-(BRILLIANT WHITE,SOFT WHITE,CREAM)

Wsg-18941
ECONOMY VESTA EMULSION-(OTHER SHADES)
 
Description:
It is an economy emulsion paint for interior use on substrates where washability is not required.
The substrate can be suitably prepared new plaster, wall, ceilings, concrete, brickwork and various type of building boards. Fast Drying. Better coverage. Wide range of colors available.
Economy product for interior use where washability is not required
More durable than ordinary distemper.
Value for money.
Water-based emulsion paint.
Visit whitesun.ke and place your orders.

ECONOMY VESTA EMULSION-(OTHER SHADES)

Wsg-18942
CROWN EGGSHELL FINISH (SEMI-GLOSS)-(OTHER SHADES)
 
Description:
A semi-gloss oil-based finish designed for use on walls and ceilings in corridors, reception areas, canteens and high traffic areas where exceptional resistance to wear, dirt and steam is necessary but where a full gloss finish is considered unsuitable. Can be applied to suitably prepared and primed woodwork and metalwork where a fashionable sheen finish is desirable.
Characteristics: High-quality oil paint based on a special alkyd resin medium and superior pigments.
Advantages: A durable, smooth, eggshell finish. Resists dirt, condensation, repeated scrubbing and is easily cleaned.
Finish: Semi-Gloss.
Application: By brush, roller or spray.
Thinning: If necessary thin with Crown White Spirit to ease application. Thin to the required viscosity for spray application. Stir well before use.
Drying Times: Re-coatable in 16 hours.
Spreading Capacity: 13-15 m2/l when applied on a primed/painted smooth surface.
Equipment Cleaner: Crown White Spirit.
Colour range: OTHER SHADES
Pack Sizes: 1 litre, 4 litres and 20 litres.
Visit whitesun.ke and place your orders.

CROWN EGGSHELL FINISH (SEMI-GLOSS)-(OTHER SHADES)

Wsg-18943
CROWN EGGSHELL FINISH (SEMI-GLOSS)-(BRILLIANT WHITE,SOFT WHITE, CREAM &amp;BLACK)
 
Description:
A semi-gloss oil-based finish designed for use on walls and ceilings in corridors, reception areas, canteens and high traffic areas where exceptional resistance to wear, dirt and steam is necessary but where a full gloss finish is considered unsuitable. Can be applied to suitably prepared and primed woodwork and metalwork where a fashionable sheen finish is desirable.
Characteristics: High-quality oil paint based on a special alkyd resin medium and superior pigments.
Advantages: A durable, smooth, eggshell finish. Resists dirt, condensation, repeated scrubbing and is easily cleaned.
Finish: Semi-Gloss.
Application: By brush, roller or spray.
Thinning: If necessary thin with Crown White Spirit to ease application. Thin to the required viscosity for spray application. Stir well before use.
Drying Times: Re-coatable in 16 hours.
Spreading Capacity: 13-15 m2/l when applied on a primed/painted smooth surface.
Equipment Cleaner: Crown White Spirit.
Colour range: BRILLIANT WHITE,SOFT WHITE, CREAM &amp;BLACK
Pack Sizes: 1 litre, 4 litres and 20 litres.
Visit whitesun.ke and place your orders.

Glory paints Cover Emulsion 20L

Product Description

Similar Products

Glory plastic Distemper 1L

Ksh270

Glory plastic Distemper 4L

Ksh750

Glory plastic Distemper 20L

Ksh2,550

Glory Paints Plastic Emulsion 1L

Ksh430

Glory Paints Plastic Emulsion 4L

Ksh1,040

Glory Paints Plastic Emulsion 20L

Ksh3,760

Glory paints Cover Emulsion 0.5L

Ksh351

Glory paints Cover Emulsion 1L

Ksh680

Glory paints Cover Emulsion 4L

Ksh1,550

WACKER® GS - GENERAL SANITARY

Ksh570

WACKER® GP - GENERAL PURPOSE SEALANT 280ml

Ksh620

Wacker® CS – Construction Seal 7

Ksh990